How to make tulle flowers by your own hands

Flowers from tulle can perfectly decorate a bouquet, room, dress or become an accessory for hair. They are made simply. Therefore, we suggest you familiarize yourself with how you can make florets from tulle at home.

Very easy way

If you do not need lush flowers from tulle, then there is a way to make flat flowers.

To do this, draw a circle on the paper and cut it out. Then fold a piece of tulle into five layers and pin with paper needles with pins. Cut out the details. Four circles add three times in half. Sew the resulting lobules to the middle of the fifth circle. You can hide the thread if you paste a few rhinestones on the top with a glue gun .

Such a flower can be glued to a postcard, hair clip or dress.

The same way, and the flower is different

If we take as a basis the above method of making florets from tulle, but add more work, we will get a wonderful hand-crafted article.

How to make a flower from tulle by your own hands? The instruction is simple:

1. Cut the material into the same squares (picture 1).
2. Fold each piece twice to make a diamond, and connect the layers with a pin pin (picture 2).
3. Cut out a circle of fleece that matches the color of a tulle and mark its center (picture 3).
4. Sew each rhombus with a vertex with a fold to the center of the roundlet (picture 4). You need to go in a circle, gradually filling the foundation with blanks of tulle.
5. When all the taffy blanks are sewn, decorate the center with beads or strivings (picture 5).
6. Take the bezel and attach a circle-base to it. Sew its edges so that the flower wraps around the headband (picture 6).

The air accessory is ready!

We make a magnificent flower in five steps

How to make a flower of tulle with your hands on your head? Very simple. The procedure is as follows:

1. You will need a piece of tulle (you can use several colors), scissors and a hair band.
2. Slice several identical lengths of tulle stripes. The more of them and they are longer, the more magnificent the flower will turn out.
3. Connect the strips together.
4. Connect the fingers together on the left hand and wind the tulle blank over them.
5. Remove the tassel from your hand.
6. Put a hair band on one side and tie a string or thin strip of tulle perpendicular to the ring to connect all the parts.
7. Cut the ring from both sides.
8. Well fluff the flower.

All is ready!

By the way, such a flower from tulle can be done on the head with a rim. Simply replace the rubber band with the workpiece by placing a hoop and also tie it with a thread.

Three-dimensional flower

Flowers made of tulle, made in this way, it is most convenient to use as a decor of a room or clothes.

You can get such an article by the same method as a lot of pompoms.

First of all you will need to take a sheet of cardboard. Draw on it two identical circles with a small hole in the center. Cut off a long strip of tulle. Connect the two circles together and start winding the diameter of the workpieces with the material. Fatine does not need to be smoothed, try to have a lot of folds. Then the flower in the end will turn out lush and voluminous.

When you wrap the whole workpiece, fix the end of the tulle with a drop of glue from the glue gun. Move aside some material and insert a pair of scissors between the cardboard round billets. Cut the tulle. Slightly move the workpieces and tie the tulle in that place with a ribbon or a tight thread.

Now you can remove cardboard blanks. They can be used to make other similar sized flowers. By the way, from the length of the tape, which binds tulle, depends on the appointment of tulle. If it is short, then this flower is used as an ornament for dresses or decorations and accessories. And if it is long, then the handicraft can be hung from the cornice or ceiling.

Fatine and Satin Ribbon

Original flowers are obtained from tulle and ribbons.

Master class on creating flowers:

1. You will need tulle, satin ribbon, scissors, fleece, lighted candle or lighter, needles and thread for the color of materials, beads, glue gun (Figure 1).
2. Make a workpiece of fleece. To do this, simply cut a circle. Its diameter depends on how much flower you need.
3. Cut off the fleece tape. Its width is equal to the double width of the satin ribbon.
4. Fold together the ribbon and fleece (Figure 2).
5. Sew the fleece to the ribbon with an accordion (Illustration 3). To do this, just make bends.
6. Sew so two ribbons along the entire length. Cut off excess material and bring it to the fire (Figure 4). The burnt edges will not crumble.
7. Take the round billet and start making the workpiece. To do this, tape or sew from the edge of the circle to its center in a spiral (Figure 5).
8. Fill in the entire workpiece (Figure 6).
9. Prepare the hairpin (Figure 7).
10. Glue the flower to the barrette with a glue gun.
11. Fill the middle of the flower with glue from the glue gun and fill in the beads (Figure 8).

A wonderful barrette made of tulle and ribbons is ready!

Fatine and Satin Fabric

Instruction:

1. Draw on the sheet of paper a flower with 8 petals, as in picture 1.
2. Fold together the satin and tulle in several layers.
3. Attach the paper blank to the layers of fabric with a pin and cut out the details.
4. Fold in pairs a piece of tulle and satin fabric (picture 2).
5. Take one pair and fold three times (picture 3).
6. Cut out the circle from the fleece and paste on it all the blanks against each other (picture 4).
7. The last detail wrap a few times and paste inside the flower (picture 5).

Now it remains to put the ready fleece flower on the rim or elastic band.