How to make nunchuck for training? Master weapons from various materials

Real nunchakas are quite expensive, so they are simply not affordable for many people. And what if you dream of mastering this weapon in order to defend yourself against hooligans, but you do not have the opportunity to buy this combat device? The best way to solve such a problem can be the manufacture of this weapon by our own hands. From this article you will learn how to make nunchuck at home, without violating the law. Of course, do not try to make a real combat device, which is not only unsafe to use, but it is also prohibited by the Criminal Code.

How to make nunchuck from wood

The following materials and tools will be required for work:

• An ordinary mop stick made of the strongest wood;
• Chain with small links or a piece of rope;
• Two self-tapping hooks;
• As many washers with a wide shelf;
• Hacksaw or electric jigsaw;
• drill;
• sandpaper;
• roulette;
• pencil.

Before you start, you need to calculate how long a rope and a string should be. If you plan to train yourself using nunchakas, measure the length from the thumb to your elbow and the width of the brush. The result should be two parameters. The first is the length of the sticks, and the second is the length of the chain. By the way, about three nunchak can come out of one stick.

Further actions are also very simple. First carefully sand the stick with sandpaper. Then cut 2 pieces and round the edges. Now take the chain and from both sides attach the screws. For greater reliability, you can process the place of attachment with varnish. In one piece of the stick, from above, drill a hole smaller in diameter than the screw, and screw it in. Do the same with the second piece of wood. This can be considered work completed. Now you know how to make nunchuck from a normal mop.

From paper

It is not necessary to make this weapon from the tree, for children's games and training, nunchakas made of thick paper are quite suitable. Smastering them will not be difficult. How to make nunchuck from paper, you will learn right now. For work you will need:

• Thick paper;
• cord;
• insulating tape;
• awl.

Prepare paper or wallpaper. Make all necessary measurements (see above). These calculations are required for us in the manufacture of two handles. Fold the paper as tight as possible, as a result you should get a stick with a diameter of not more than three centimeters. Next, firmly tape the handle on both sides, do not forget to fix the middle. In the same way, make a second stick. Now measure five centimeters from the edge of the handle, pierce it with a shil, you will have a hole. Pass the tourniquet through it and tie it. With the second handle, you must do the same manipulations as with the first one. Manufactured nunchuck tightly wrapped with electrical tape. That's all!

From plastic

As a material for light training nunchak can also be plastic or hard rubber. To make such weapons, you need to take:

• 2 pieces of hose;
• Sheet foam rubber thickness of not more than nine millimeters;
• Rope or lace.

Cut 2 pieces of tube, in each of them, drill a hole 1.5 cm from the edge and connect the cord. Then wrap the handles with a piece of foam rubber so that the ends of the handles are soft. If you do not, then in the process of training you risk damaging your own eye. You do not want to spend all your life with a bandage, like Field Marshal Kutuzov? Then prepare a strip of foam rubber so long that it protrudes for each edge of the handle by three centimeters. Then it should be cut on each side four times, then folded in pairs and glued together. As a result, the arms should have rounded ends. To make foam rubber as strong as possible, you can glue it or fix it with threads. So you got the answer to the question: "How to make nunchuck with your own hands made of plastic?".

Of plastic bottles

How to make nunchuck more? They can be made from empty plastic bottles with a capacity of 330 milliliters. Since this work is extremely simple, anyone can easily cope with it. In each lid you need to drill a hole with a diameter of not more than four centimeters. Then through them you need to pass the rope, tie the knots, twist. Bottles need to cut the bottom. Only so the edges of the arms will turn out to be rounded and will not injure you or your partner during the training.

From newspapers

Do not want to long tinker over the production of nunchak, but do you need them for training? You can go on the easiest way, having made them from ordinary newspapers. Do not be surprised, they are no less effective in training than plastic or wooden nunchuck. The fragility is, perhaps, their only drawback, which can be called a drawback with a big stretch. It is even possible to make such nunchakas even a child, because there is nothing easier than to roll a couple of newspapers into the tube, pull them with an elastic band and connect them with any lanyard.

Parameters to be taken into account in the work

So how correctly to make nunchakas, that they were not only safe, but also convenient to use? This will help you with some tips and advice on how to make them.

1. To determine the desired length of the handles, measure the distance from the folded thumb to the elbow.
2. Measure the width of your fist. This distance will be the length of the connection.
3. The material serving as a connecting link, can be a rope, a tourniquet, a chain.
4. The shape of the handles can be round, rounded, conical or faceted.
5. To determine the thickness for conical sticks, the length of the second phalanx of the little finger (the thin end) and the length of the second phalanx of the index finger (the thick end) are measured.
6. The weight of the training weapon can be from 120 to 160 grams for the lightest nunchak, from 600 to 1000 grams - for combat weapons, from 2500 to 5000 grams - for weighted ones.

Perhaps, after reading this article, you found the answers to all your questions related to the manufacture of the training device, and now you know how to properly make nunchuck.