A bead from a bead: the scheme. Weaving of beads from a bead, photo

There are many ornaments that can be made from beads. Today, ropes are very popular. It is a tight cord of openwork or dense weaving. Its thickness depends on the number of loops in the row: the product is thicker, if the loops are larger. The number of loops directly depends on the number of beads in the first row of the future decoration. Experts recommend using the necessary amount of beads in the base, provided for each type of equipment. Are you going to weave a bead of beads? Scheme is the first thing you need.

The plaits. History

In the old days, plaits were woven with a few threads, getting a flat ribbon. After that, a cord was made, connecting the two edges of the pre-produced belt in length. Another way to create a tourniquet is to weave decorations with beads strung on it. Knit a tourniquet from beads crocheted or tightly wound the rope cord to turn the coil, with each adjacent coils stitched through one bead. Over time, the bundle of knitting began to be carried on one thread.

Today, there are many options for harnesses:

- spiral;

- square;

- Mosaic;

- openwork, etc.

Crochet crochet, schemes for which will help you make a real masterpiece, use it as a separate decoration or use them in the manufacture of other: ties, chains, coulombs, twin harnesses, etc. Also these items can be used as additional elements in ornaments: rims , Collars, pendants, earrings, etc.

Features of the manufacture of harnesses

Most types of plaits weave with a rod. An exception is the mosaic weaving. A pencil or ballpoint pen of suitable diameter can act as a rod. The rod should not very tightly enter the inner space of the bundle. First weave without a rod, after the 5th row knitting is carried out on the rod. Remember that all beads must necessarily fit tightly to each other, and the thread should not be visible. It should be monitored and the tension of the thread. It should be uniform. Otherwise, the surface of the decoration will be loose. Often weave a bead from a bead by a crochet, schemes for which it is possible to take not only already ready, but also to create the personal.

The product must be kept in working position in the left hand. You need to hold it with your index finger and thumb. The string with beads must be on top of the index finger, slightly pressed middle. The rest of the fingers should be pressed against the palm of the hand, thus applying its tension. Knitting is done clockwise. In this case, the tension will be uniform.

Manufacturing of a mosaic harness

Weaving a bead of beads in a mosaic way involves a set of the first row and the closure of it in a ring. Experts advise to type an odd number of beads. Consider the weaving of the bundle on a conditional example.

On a string of 120-150 cm, type 7 beads, for example, black, and pass the needle through the first bead. Remember that you should leave the beginning of the thread for further embedding. Approximately leave 15 cm.

We stretch the thread, we get a ring. This is the first row of weaving.

For the manufacture of the harness we type the second row. We take a white bead and pass the needle through the third bead of the first row. After we collect another bead of white color and pass the needle through the fifth bead of the first row. Again, we dial beads of white color and pass the needle through the seventh bead of the first row. A total of 10 beads were collected. Woven already 2 glad.

Flatter third row, dialing 4 beads of black color. Remember that after each bead is put on, the needle should be passed through the protruding beads of the previous row.

Peculiarities of weaving

Continue the weaving. In this case, you need to monitor the thread - it must be attracted. The tow of the beads, the scheme of which is taken into account during the weaving, should not be too rigid. Flexion should be free, so you must first make a sample on which the weave will be worked. So you can easily weave a tourniquet of beads. A master class on this technique will clearly demonstrate the example of making a modern decoration.

Having trained on simple bundles, you can go to multi-colored schemes, creating patterns.

When you twist the bundle of the desired length, you must return to the beginning of the cable. The first 5 rows of the product must be untwisted, because in this section weaving turns loose. After that, the tourniquet is doped with a working thread to the required length, taking into account the rows removed. After the performed weaving, it is possible to start thread sealing.

If you want to make a bead from a bead, the scheme of which assumes a small length, for example, around the neck, then you should make a buckle. It can be weaved, as well as burned, or purchased ready-made fasteners, which are often sold in the hardware departments. If you assume the manufacture of a long bundle, which will be worn over the head, then its ends can be joined end to end or by a chain.

Characteristics of the mosaic harness

1. You do not need to pre-seed the beads.

2. Used for making bracelets or beads.

3. The smoothness of the bead surface is from the average.

4. It is bent by kinks, flexibility - average.

5. Weave is done by needle and thread or beads in a clockwise sequence.

6. The inside is hollow.

7. You can easily create a drawing by first drawing a diagram.

Thread Fixing

The weaving of beads from the beads should assume the presence at first of a thread 15 cm long. This thread must be inserted into the needle and gently passed it along some beads along a spiral of the article. After the thread has passed through 4-5 beads, it is necessary to carefully hook the needle between the neighboring beads and make a loop knot. Then you should pass the needle through the next in a spiral bead and again using a nearby thread to create a loop node. So it should be done 2 more times.

After the needle, you can skip two beads and cut it, leaving a tip of 5 mm. It should be melted with the back of the match flame. At the end of the thread, a small ball is formed in this way, which will fix the thread and will not be visible. The second end of the thread should be sealed in the same way. The extension of the thread is the same. This way finish the tourniquet from the beads. The master class presented in the article will help each person to quickly understand all the intricacies of weaving this decoration.

Remember: if the beads are light colored, then the thread can not be fused in any case, because there will be a yellow stain. In this case, you just need to make more nodules, and cut the thread under the root.

Butt Welding

If you are going to seal the ends of the harness buttock, then you do not need to close the working thread. It can be used to connect ends. The initial segment should be fixed by the above method.

For the connection, both ends of the harness should be folded on the table. The picture must match! Needle should be passed into the protruding beads alternately from one side, then the other. The thread must go through this way two times. After the needle should be passed through the beads in a spiral, using loop nodules, as in the previous method of embedding.

Remember that neither knots nor strings should be visible. Knitting a bead of beads at this stage must be done with utmost care. The main rule in beadwork is the purity of the product.

When you learn how to correctly make a connection of the harness butt-end, you can make an ornament in the form of a chain. It is enough to connect each subsequent link, made in the harness technique, in this way.

Conclusion

A tourniquet of beads, the scheme of which was completely observed at work, can be decorated at the end with balls, pendants, loops. Or as an option - braid the product chain. Often used and necklace of two bundles of different colors. You can complete your image by making an additional bracelet or earrings according to the same pattern. So you will have an elegant kit.