How to make a vibrating table with your own hands?

If you own a private workshop or an enterprise for the production of paving slabs, you certainly need to have a tool such as a vibrating table. With your own hands you will make it, or purchase a ready-made version in the store, it is not so important - the result and quality of the work performed will be almost at the same level. However, if your company's budget is significantly limited, you do not have to do anything else, how to make this device with your own hands. That is why today we will consider how to make a vibrating table with minimal expenses of money and time.

Drawing

To begin with, you should create an image of the future design, with which you will further produce the tile. As we know, the vibrating table performs one function - by its actions it throws out excess air from the concrete solution, due to which the composition of the tile or other concrete product becomes more durable. But in order for the quality of the work to really satisfy all expectations, it is necessary to draw up a drawing correctly. In the question "how to make a vibrating table with your own hands", the drawing must have the most accurate values and dimensions with all observance of scales. However, it is not necessary to draw lines accurate to a millimeter.

How to make a vibrating table with your own hands? Making the ground

Now go to work. Having become acquainted with the indications of the drawing, it is necessary to weld several corners with the size 60x60x5 mm with each other using a welding machine. In this case, the resulting frame needs to cut 4 bars and also weld to the structure. They should be arranged symmetrically. At this angle of the base of the frame, it is possible to make cuts at 45 ^° for the reliability of the structure.

The top cover is, perhaps, the only mechanism that almost completely repeats the contours of the base of the device. Due to this, it is not very difficult to make a vibrating table by one's own hands. After the steel sheet has been welded to the frame, proceed to install the motor (main vibrator). Yes, and set the OSB sheet between the frame and the sheet. This is done in order to remove unnecessary irregularities, welding traces or heads of fixing bolts.

How to choose a vibrating motor for this tool?

Doing the vibrating table yourself, remember that the main part of this device is a vibrator - a small electric motor that rotates the surface of the device (sheet at the base) from side to side. Some craftsmen use a motor from old washing machines as a power unit, others buy a ready-made unit in a store. It is worth noting that the first option is not so reliable and durable. The maximum, as far as the motor from the washing machine was enough, is for 20-25 switching cycles. Further, the motor required replacement (in its design, the axle began to dangle, or the bearings were cleared). Therefore, for the production of paving slabs, it is best to buy ready-made vibrators in stores. Let them stand at times more expensive, but they will serve you very, very long.