How to lace sneakers in different ways: useful tips

When doing sports or dancing, it is very important that the shoes sit tightly on the foot. This does not mean limited movement and excessive crowding. Additional discomfort should be excluded. First of all, the comfort and degree of fit depends on the version of the fastener. Most often, for example, for sports shoes are used laces. And there are a lot of variants of their tying. In this article, you will find several ways how to lace sneakers. Variants of interlacing are described in the form of step-by-step guides for execution.

The history of modern lace

Thin ropes for fastening shoes on the foot were used by the ancient Greeks. But it was not until the end of the 18th century that the clever Englishman Harvey Kennedy guessed to thread the shoelaces into the holes and twist together. The main convenience was that with their help it was possible to adjust the degree of fit, providing the necessary comfort to the foot. At that time, the innovation did not cause much enthusiasm among the public, as more attention was paid to the elegance of the fasteners and the beauty of the finish. And only after a while the new idea spread. Especially she liked sports and recreation lovers. Today, of course, every schoolboy knows how to lace sneakers or shoes. And their first attempts to pass the ropes through the holes of the toddler do in kindergarten age. For them, this is both an exciting game, and hard work. And later the children often even compete among themselves, how to lace the sneakers stylishly and fashionably. Although beauty is more important than convenience and practicality.

Different ways of lacing

With a wide or flowing foot

To provide the greatest comfort, you need to reduce the tightness at the beginning of the lacing and slightly increase to the ankle. To do this, thread the shoelaces in the first few holes from the toe parallel to each other, without crossing. Approximately from the middle, the binding should be cross-shaped. When moving the foot will not be too tight in the lower part of it.

At a narrow foot

How to lace sneakers, if they seem a little loose, although when buying were fit? Do the work opposite to the one described above. Lower cross-shaped covers provide the greatest fit. And in the upper part one or two parallel "stitches" will suffice.

With a high rise

To facilitate the pressure of shoes, use the horizontal direction of the laces. Outside, the bindings will look like cross strips, and the interior will be cross-shaped. Such a measure of free lacing will not be too tight and will provide the greatest comfort with a high rise of the foot.

What is the distinguishing feature of Nike shoe lacing ?

This brand is considered primarily sports shoes. Therefore, it is necessary to remember the convenience in active occupations, excluding distractions. Among the main ones is the definition of the place where the tied ends will be located. How to lace Nike sneakers, ensuring no loose waving ropes? To do this, you need to do the work so that the direction of penetration into the uppermost holes of the shoes is not outward. Both laces, thus worn, will be inside the shoes. Bring them together under the tongue and tie. Free ends do not need to be displayed after this. Usually they are neatly tucked under the edge of the sneakers, while keeping away from the waving bows that can interfere with walking or running. The same rules apply to how to lace Air Max sneakers, which are among the most popular series of shoes are the most popular. A tight fit on the foot and additional cushioning due to the air cushion inside the sole will provide increased comfort and convenience.