TechnologiesElectronics

How to choose charging for a car battery? Best charge for car battery

How to choose charging for a car battery? There are many models on the market, and it's quite difficult to make the right choice. First of all, it is important to note that the devices are very different in parameters. There are also design features. However, general recommendations can be given.

How to choose a device?

Parameter of the output voltage can not exceed 12 V. If you select a simple model, the power should be about 40 watts. The average overload indicator is 12 A. Many modern modifications are sold with quality fuses. The heating protection system is provided for them in the first class.

It is also important to pay attention to the design features. First of all, the clamps of the model are checked. The housing must be sealed. The voltage switch is the most commonly used rotary type. Many modifications are made with the function of continuous charging. Also, before the purchase, the system's light indication is checked.

How to choose a powerful model? In this case, the output voltage should be 15 V. The overload parameter for good devices is 25 A. The housing is of an impact-resistant type. Modern models have metal clips with clamps. In total, the device must have at least two fuses. It costs a high-quality charge for the batteries around 3800 rubles.

How to make a model for 6 V?

How do I charge the car battery for 6 V? In this case, a high-quality step-down transformer is required to assemble the device . Resistors are most often selected without a lining. Condensers are used to apply voltage to the transformer. Operational and pulse modifications are suitable for chargers.

In this case, it is more reasonable to dwell on the first option. Clamps are normally used in steel. Expanders are used to overcome the impulse noise. If you collect the modification with the function of continuous charging, then a tetrode is used. This element on the market is sold with or without a stabilizer.

Homemade 10 V device

Homemade charging for a 10 V car battery is very common. A distinctive feature of these modifications is the presence of a converter. Charging is made for the car battery with its own hands with the rotary type controllers.

Transformers are commonly used for reducing. Resistors for models are used inverter or phase type. If we consider the first option, then the capacitors are installed with an overlay. The conductivity index on the winding should not exceed 5 microns. It is also important to check the negative resistance of the charger. The clamps of the model are installed last.

Self-made modifications to 12 V

Self-made charging for a car battery at 12 volts consumes quite a lot of electricity. To make the modification yourself, a step-down transformer is required. Resistors can only be used in an impulse type. In total, two condensers are selected for the model.

To increase conductivity, an expander is used. The stabilizer is installed behind the plate. The negative resistance in the circuit must not exceed 40 ohms. Regulators are used both rotary and push-button type. The first option involves the use of a converter. Modifications with push-button regulators are rare. To fix them, special tetrodes are soldered. At the end of the job, it will only be necessary to connect the clamps to connect to the battery.

Overview of the Pulso BC-15860

The BC-15860 is the best charge for a Pulso car battery. It is made with a fuse. The protection system in the equipment is used by the KK20 series. The continuous function function of the model is. If necessary, the power of the modification can be changed. The output voltage is 12 V. The clamps of the models are provided without fasteners. Customers' reviews indicate that the device does not weigh much. In operation it is very simple. Buy specified charging in the market user is able to price from 3800 rubles.

Description of charging Pulso BC-15855

This charging for the battery (car) is sold with two clamps. The output voltage equals 8 V. If you believe the feedback from customers, then the problem with overheating is rare. The protection system of the model is used with the marking KK20. The function of continuous operation does not exist for the model. The regulator in the device is used with a thyristor.

The display system is provided with a diode type. In total, the model has two fuses. Fixators in this case are absent. The body is made sealed, able to withstand more loads. The conductivity parameter for charging batteries is 3.5 microns. The output resistance of the model is low. Said device at a price of 4 thousand rubles.

Opinion about the model Pulso BC-15823

This is a compact and simple charging for a car battery. In this case, the expander is of the operative type. If you believe the responses of drivers, then problems with fixatives are rare. In general, the model weighs a bit and is very simple to transport. The output voltage of the modification is 4 V. The protection system is used with the KK22 marking.

The function of continuous operation for charging, unfortunately, is absent. The threshold overload parameter does not exceed 4 A. The display system is normally used as a diode type. In total, the model has two fuses. Buy a device in stores can be for 3400 rubles.

Lavita device overview 19

This charge for the battery (car) among drivers is very much in demand. First of all, it is important to note that the power of the equipment is equal to 35 W. The charger has a protection system. The continuous function is installed. If necessary, the user can adjust the power.

The output resistance parameter is at 40 ohms. The conductivity of the current is no more than 2 microns. Suitable device for batteries, in which the capacity does not exceed 55 Ah. The display of the model is of the diode type. A fuse only uses one. The parameter of the threshold overload is at the level of 30 A. Buy this battery charging at a price of 3800 rubles.

Charging description Lavita 23

This charging for the battery (car) has a lot of advantages. First of all, drivers note the simplicity of the design. Weigh the model a little, not afraid of mechanical damage. The permissible humidity level of the equipment is 57%. The input voltage of the device is 6 V. The threshold charging power is at the level of 47 W. Problems with overheating of the transformer are rare. The protection system is installed in the KK20 series.

The overload parameter is 35A. In total, the device uses two fuses. In circulation, the model is very simple. The clamps are of high strength. Fixators in this case are not provided. The network cable is included in the kit for 1.5 meters. Indication is used diode type. The continuous function of this battery charge is. The permissible temperature is 40 degrees. For batteries at 30 Ah model fits perfectly. Buy a device in stores can be priced from 3300 rubles.

The Leader 400

In this charging of the batteries, a step-down transformer is installed. The extender for the voltage stabilization is of the operational type. In total, the model uses two fuses. Clamps in this case are installed without fasteners. In the documentation, the protection system is indicated with the KK20 marking. Thus, the device does not fear changes in the 220 V network.

The ultimate overload of the model is at 3 A. For 30 Ah batteries, the device fits perfectly. The continuous function of the manufacturer is not provided. If you believe the responses of drivers, the model weighs a bit. The case is durable and is not afraid of mechanical damage. The output voltage of the battery charging is 8 V. The power indicator is at 40W. Buy the indicated charge on the market can be for 3500 rubles.

Overview of the device TESLA ZU-10642

This portable charging for a car battery is sold with a quality pass-through expander. A zener in the device is provided. For batteries with 20 Ah model fits well. The output voltage of the modification is 8 V. The protection system is applied with the marking KK21. A fuse only uses one.

The threshold overload of the system is 3 A. For the 40 Ah batteries, the model is not suitable. It is also important to note that the permissible temperature is only 30 degrees. The display system is provided with a diode type. It is worth this charge for the battery (car) in the area of 4200 rubles.

Description of charge PSC 2030T

In the indicated charging of the batteries, a wire expander is installed. The output voltage parameter is equal to exactly 6 V. The protection system is used by the KK20 series. Separate attention deserves a zener diode. With impulse noise from the network 220, he manages quickly. For batteries at 25 Ah the device fits well. The resistors of the model are of an open type.

The fuse is only installed one. The indication for this battery charging is provided by the diode type. If you believe the responses of drivers, then it breaks infrequently. The acceptable charging temperature of the batteries is 35 degrees. The maximum overload indicator is at the level of 5 A. The price for this model fluctuates around 4400 rubles.

Opinion about the model "Vitol"

These automatic charging for car batteries are equipped with a pulse expander. Thus, their conductivity is high. The output voltage parameter is at the level of 4 V. The display system is used by the KK20 series. Pulse interference device is not afraid. The zener is in this case used with fuses.

The maximum overload parameter is at 6 V. The continuous function function for charging the batteries is available. The permissible temperature is only 30 degrees. However, the device is not afraid of high humidity. Buy the specified charging of batteries in stores can be for 4 thousand rubles.

Goal device overview

These chargers are manufactured with operative expanders. For batteries at 25 Ah they are suitable. The capacitor in the model is of a through-type type. The output voltage of the equipment is 8 V. The threshold overload threshold is exactly 30 A. The protection system is used by the KK20 series. From overheating of the transformer it helps quite strongly. The limiting power of the model is 22 watts. Buy the specified charger user can with the price of 4300 rubles.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.unansea.com. Theme powered by WordPress.