How are the generator belts arranged, and what are they for?

Generator belts are devices that serve to transfer the rotation of the internal combustion engine to its auxiliary units. Some devices are capable of driving several mechanisms at once. This part can affect the pump, hydraulic power steering pump , various compressors and even a generator. In order for all of the above mechanisms to work smoothly and smoothly, it is necessary to replace the part in a timely manner, and if necessary adjust its tension. In today's article, we'll look at what the generator's belts are. And also find out what their features are.

To date, the generator belts are divided into several types:

• Wide;
• Drive belts of normal section;
• Fan.

Each of these parts is selected depending on the specific brand and model of the car. For example, the belt of the generator "Ford - Transit" can not be put on "Fiat-Dukato", that is, each model has its own device. In order for the side part of this mechanism not to wear out so intensely, many manufacturers include nylon and cotton in their composition. These two components are part of the outer coating of the part. The timing belts of the generator transmit the force by means of transverse teeth and a drive mechanism, which allows them to maintain the specified position of the shafts. During operation, such systems do not require regular lubrication, in addition, they almost never vibrate and do not stretch.

With the development of technologies on cars, multi-rounder belts of the generator began to be used. Such products are capable of driving a variety of mechanisms, including the hydraulic booster and air conditioning compressor. These parts consist of several belts connected together. Such products are intended, as a rule, for powerful generators. The multipurpose device due to its special design has an extended service life and possesses greater reliability than the gear analogs.

In addition, the generator's V-belts are widely used. They serve to accurately match the speeds of rotation of all mechanisms and devices. Motorists attach special importance to double-sided wedge products. Such a belt generator "Renault" has the best driving qualities. There are also polyclinic products. Their composition is special in its own way. In the upper base they have flat teeth.

How long does it take to replace this part?

Typically, the belt life of the car generator is between 50 and 60 thousand kilometers, depending on the type of machine. However, do not assume that in this period of time, this device will continuously ensure reliable operation and rotation of all necessary devices. After several thousand kilometers, the car belt may be weakened, so from time to time, you should adjust this mechanism and check its current status on a monthly basis.