Garden rollers: can I make my own hands?

The quality of the lawn often depends on how well the site was prepared. Of course, before planting grass, it is necessary to carry out a number of works. First of all, you must remove various debris, for example, foil, paper, various wrappers and film. All this can not be left in the soil. Otherwise, the grass in some places will be spotted and sick. Naturally, this will affect the quality of the lawn. Land after the removal of debris should be thoroughly weeded, and then treated with herbicides. This preparatory work is not limited. To make the lawn grow well, it is worth considering the preparation of a drainage layer. It is necessary to ensure that water does not stagnate under the roots as a result of heavy rains or excessive watering. In this case, it is very difficult to do without a garden ice rink. After removing the layer of fertile soil, it will be necessary to well sand and gravel. In addition, the garden rollers allow you to level the area. Whether it is possible to make them with our own hands, we will consider further.

When you need a garden rollers

In some cases it is almost impossible to do without special tools and devices. A garden skating rink also applies to similar ones. You can make this unit with your own hands. Typically, such a tool is necessary when:

1. Arrangement of garden paths.
2. Laying of a roll lawn.
3. Soil compaction for further planting of grass seeds.
4. Rigging after mulching a lawn.

It is worth noting that the garden rollers may be required and after the lawn grows up. They can be used after cutting grass. As a result, the lawn will become softer and more attractive.

Buy or make?

If you want, you can make a garden skating rink with your own hands. But if absolutely necessary, the tool can be purchased at a specialized store. Foreign and domestic manufacturers offer a fairly wide range. Among all the variety there are rollers made of durable metal and filled with sand or water. The most popular is the mammoth rink "Mammoth". However, the cost of such a device is quite high.

The most economical and simple option is to make a garden skating rink with your own hands. In addition, the construction of such products is quite simple. To do this, you can use a round container, for example, a barrel or a cylinder filled with water. Some gardeners manage a common log. When manufacturing the roller, you should consider all the necessary parameters. In the finished form, the product should not be more than 70 centimeters wide. At the same time, the weight of the garden rink should be 80-120 kilograms. Otherwise, it will be very difficult to achieve the desired results.

How to make a roller of a pipe

If the handmade garden roller is not needed at once, you can make it as follows:

1. First you need to cut a piece of asbestos-cement or steel pipe of the right size. In this case, the part will fulfill the role not only of an even working surface, but also formwork for a solution.
2. In the middle of the workpiece, an axial tube must be inserted. Its diameter should be much smaller than the diameter of the base.
3. After that it is required to pour the cement mortar. When the material solidifies, you can make a handle for more comfortable work.

Such garden rollers are distinguished by their durability. With their help, you can process a section of any area.

Roller from plastic bottles

Garden rollers made of plastic bottles are made even easier than from pipes. In addition, the process takes a little time. To make a garden skating rink, you need:

1. Several plastic containers from under water, the volume of which is 19 liters, you need to connect with each other.
2. To join, you need to cut several strips of the same plastic bottles. After this, the construction should be carefully wrapped with scotch tape.
3. To the neck of the tanks you need to attach the ropes, and inside pour the sand and ram it. As a result, the weight of such a rink is about 100 kilograms.

Finally

The garden rollers make it possible to make the lawn more neat and smooth. However, such adaptations must be able to use. Do not forget that the main goal of packing is soil compaction. It is not necessary to smooth the hill with a roller. Otherwise, the depressions on the site will become deeper. In fact, such a device allows you to detect any surface defects.