Furnace for bath "Feringer": description, owners reviews, characteristics

Bath furnaces of the company "Feringer" in the market are presented in large quantities. A distinctive feature of the models can be called qualitative heaters. They are issued both open and closed type. By the diameter of the heater can be very different. The permissible volume of the steam room depends on this.

According to the design of the furnace, the presented companies are very attractive. Decorative inserts on them look great. For convenient use of the stoves, there is a convenient ash pan. If necessary, the grate can always be cleaned. Also in furnaces of the presented company there is a system of protection from soot. It is an average model "Feringer" for a bath for 15 square meters. Meters around 32 thousand rubles.

Models "Feringer" with an open stove

Sauna stoves with open stoves have been very popular lately. In this case, the valves are made of refractory steel. The afterburners are located in the lower part of the furnaces. Convectors are installed in models with grate only. They did not directly blow them. The diameter of the nozzle can vary. Chimneys for furnaces are used on an average width of 130 mm. A qualitative oven with an open stove in the area of 24 thousand rubles will go around.

Devices with a closed stove

Furnaces with closed heaters are great for large steam rooms. A distinctive feature of them is a volumetric furnace. Also, the models use special slats. In some furnaces they are installed with a latch. For a normal air circulation and a gas outlet, a damper is used. Water dispensers are available in different volumes. Directly the ash chambers are located at the bottom of the devices.

The lining for the models by the manufacturer is provided with a heat-resistant type. In operation, ovens with closed heaters are very simple. Screens are used in different sizes and look great. If necessary, the damper can always be cleaned by yourself. It will cost in our time a high-quality oven for the bath "Feringer" in the vicinity of 32 thousand rubles.

Description of the model "Feringer Classics"

If you believe the opinion of the owners, the oven "Feringer Classics" is ideal for steam rooms for 15 square meters. Meters. In this case, the heater is provided in a closed type. The ash chamber of the model is located at the bottom of the device. Above it is a thin insulating lining. Stones in this oven can be loaded up to 55 kg. Its height is 800 mm, and the model weighs exactly 120 kg. The system of gas ducts in this case is provided. Thus, the products of combustion never enter the steam room.

The grate near the furnace is made of refractory steel. The remote tunnel of the model is located in the lower part of the structure. According to many buyers, the ash pan is foreseen. Thus, it is often not necessary to clean it. The cover at the combustion chamber opens freely. The convector has to be monitored periodically. However, the nozzle is rarely contaminated, so it should only be cleaned once a month. To buy the presented oven for the bath "Feringer" in the store can be priced from 25 thousand rubles.

Characteristics of the "Mini"

Data furnace for the bath "Feringer" reviews from buyers reviews, usually get good. The heater has an open type. For large steam rooms, the presented modification is not suitable unambiguously. It should also be noted that the ash pan of the model is of low capacity. Thus, the device weighs a little. However, the ash pan is often cleaned. The lid at the fuel chamber is located at the bottom of the structure.

According to many buyers, it is always easy to open, and it closes very simply. If necessary, the water dispenser can always be checked. The damper in the presented model is located near the ashtray. The system of gas outlets in the model is available. This furnace also boasts a high-quality refractory lining. The specified model in the store does not exceed 30 thousand rubles.

Opinion of buyers about "Feringer Lamel"

Most buyers prefer this oven because of the quality afterburner. In this case, high temperature is reached very quickly. Thermostable lining of the model is available. Directly the ash pan is under the furnace. The puddle is in turn located in the upper part of the structure. The nozzle of the model is not of large diameter.

If you believe the reviews of buyers, then the decorative frame looks great. The furnace door is quite comfortable, and opens without problems. If necessary, the ash pan can be pulled out easily. The lower frame near the stove is durable. The total weight of the model reaches 110 kg. In this case, the height of the combustion chamber is 33 cm. The protective damper at the model is provided by the manufacturer. The chimney in the construction is available in a diameter of 155 mm. The flue gas system is made of heat-resistant pipes. Buy a model the user is able to only for 25 thousand rubles.

What do they say about Feringer Dobrynya?

The indicated sauna stove "Feringer" is suitable for steam rooms at 13 square meters. Meters. The ash pan of the model is of small size. However, in maintenance it is quite simple. If you believe the opinion of buyers, then problems with the convector are rare. There is a water tank in the upper part of the chamber. Under the flap, the lining is provided. The direct tunnel is equipped with a special protective cover. Also presented furnace is distinguished by a qualitative ashtray. The nozzle is not of large diameter. The decorative insert at the stove will look great in any bath. Buy this model, "Feringer" can be for 28 thousand rubles.

Overview of the Lada furnace

This furnace reviews from buyers receives only good. This model is suitable for steam rooms for 14 square meters. Meters. The combustion chamber in the structure is located above the ash pan. Directly the grate is located near the convector. Insulating lining under it by the manufacturer is provided. The model has a standard blower. Next to the ash chamber is a small door, which is very easy to open and snug against the frame.

According to many owners, the gate valve at the stove is designed to be sturdy. All gases are removed through the system and do not enter the bath. The decorative frame of the model is. In this case, the swivel type is used. Stones in the specified model, you can put a maximum of 50 kg. Buy in the store oven for the bath "Feringer" user can for 30 thousand rubles.

Description of the model "Samarkand"

Many owners of this stove are primarily appreciated for their compactness. Plenty of room in the steam room, it does not take. The combustion chamber itself is available at a height of 35 cm. There is a safety shutter in the model. The ash chamber is located above the frame. The ash basin in the presented model is located on an insulating liner. The convector in the oven is standard. The water dispenser is located immediately above the afterburner.

If you believe the opinion of buyers, then the protection system of the model is of high quality. In this case, an external tunnel for air circulation is available. Installation of the oven in the bath is quite simple. The damper is of a sliding type. The thermal damper at the convector is available. Also it should be noted that a maximum of 55 kg can be placed. Buy this oven for the bath "Feringer" in the store user can for 32 thousand rubles.

Overview of the oven "Baby"

If we talk about the parameters of the furnace "Feringer Malyutka", it is important to note that its mass is 110 kg, the width of the grate is 40 cm, and the chimney by the manufacturer is provided for 155 mm. The fuel chamber in this case is available with a grate. If you believe the consumers' reviews, then it is easy to get the ash pan out of the oven. Insulating lining under it is available.

The ash basin in the structure is installed standard, problems with it are rare. However, there are still drawbacks in the model. First of all, the owners note a small afterburner. There is no damper in it. The frame is solid, but its legs are not too stable. If to speak about advantages, then the qualitative gas exhaust system deserves attention. In this case, the casing over the convector is provided by the manufacturer.

The remote tunnel of the model is installed in a large diameter. A dispenser for water is provided by the manufacturer. For secondary air there is a separate channel. The glass in the present device is of a heat-resistant type. Stones can be loaded in a capacity of 60 kg. Suitable model for baths of 15 square meters. Meters. It is also important to note that the gate is installed with a gate valve. Find the furnace company "Feringer" "Baby" (steam modification) in the store can be priced from 24 thousand rubles.