Saw pendulum mounting Makita LC1230: photo and reviews

The saw Makita LC1230 is a modern mounting tool, which is intended for professional use. With this equipment, you can cut metal corners, pipes and profiles. The saw has a reliable engine, the power of which is 1750 watts. It allows you to cut parts quickly and qualitatively without chipping. To set the cutting angle, it is not necessary to use a special tool. The workpieces are fixed using a clamping jaw.

All these and other characteristics force buyers to choose their choice in the direction of the described model, as it can be used both in everyday life and in workshops that deal with the cutting of material. If you decide to buy this tool for yourself, you need to take care of allocating free space for it, because the equipment though compact, but requires the presence of a separate table in the room.

Reviews about technical characteristics

The Makita LC1230 saw has a disc with a diameter of 305 mm. As for the cutting depth, it is 115 mm. Users do not like that the instrument does not have a smooth start, but this disadvantage is compensated by many other advantages. For example, the cable length is 2.5 m and allows you to work with the tool without restrictions. The landing diameter of the disc is equivalent to 25.4 mm.

Consumers argue that the width of the cutting in 150 mm is enough to perform a wide range of work. However, there is no support for constant turnover under the influence of load in the equipment. It should be noted that the device weighs 19 kg, so to install it you need a reliable table. The number of revolutions per minute varies from 0 to 1300 units.

A little about the equipment

Makita LC1230 is equipped with a carbide disk with 60 teeth for cold cutting. Consumers note the presence of safety goggles and a socket wrench.

Reviews about the main features

The described brand of the instrument has, in the opinion of buyers, many positive features. Among them, you can identify the possibility of reliable fixation and comfortable grip, as well as security. With regard to reliable fixation, this functional is relevant in relation to the quick-clamping vice, they are used to secure the workpiece securely. Consumers argue that the handle allows you to provide a comfortable grip, which creates the conditions for confident work.

The metal protective cover of the disc ensures safety, while the operator can hope that he is well protected from injury. Makita LC1230 saw, as the buyers emphasize, has many advantages, among them it should be noted:

• Low weight;
• Double protective insulation;
• Compact size;
• Keyless change in the cutting angle.

Reviews about the operational features

The cutting machine described above can be used for the most accurate cutting of aluminum, plastic, steel, copper and iron billets. With this equipment, you can cut the steel profile or cable channels. Cutting is not accompanied by the formation of smoke and sparks. The unit belongs to the professional class of equipment, and the cutting angle varies from 0 to 45 °. The insertion of the cutting disc is 25.4 mm.

Before starting work, you should familiarize yourself with the depth of the cut. If we are talking about 90 and 45 ° for longitudinal cutting, the depth is 115 and 90 mm, respectively. If the cutting is carried out on the butt, then at an angle of 90 ° the depth is equivalent to 75x150 mm. As for the depth of the face cut at an angle of 45 ° C, it is 85x85 mm. The Makita LC1230 is compact enough as users claim. The tool dimensions are 516x603x306 mm.

The tool is longevous, with its help you can accurately sawn details. The machine has a powerful engine and provides high performance. The carbide edging has a carbide edging, with the help of this supplement it is possible to achieve an ideal cut without burning and burrs. The disc is characterized by increased wear resistance. As users emphasize, this dramatically reduces the cost of consumables. Due to the fact that sparks do not form during metal cutting, the tool can be used in conditions to which special safety requirements are imposed. Consumers like that the model is supplied with a special dust collector, however for proper operation it is necessary to carry out periodic cleaning.

Cutting saw Makita LC1230 has a protective casing and a spindle lock. The latter is necessary for rapid change of the cutting element. The use of an additional tool when fastening workpieces is not required.

Positive feedback on the features of use

Saw mounting Makita LC1230 has many advantages. Among them, one can point out that the tool is ideal for skillful use. If sawing pipes whose walls make a limit of 3 to 4 mm, then the disk will have a maximum of 220 cuts. From this it is necessary to draw a conclusion, which consists in the following: if it is necessary to cut thin-walled profiles with the help of the factory disk, then it can suffice for a long time. If you need to work with more massive materials, you should additionally purchase consumable disks.

According to users, the cost of disks "Makita" is higher. If you want to save money, then it's best to buy Bosch discs. With the saw described, as the buyers emphasize, it is possible to obtain clean cuts, and within 3 years usually it takes about three disks. Clamp, according to users, is convenient. This can not be said about the native disk.

All users note the high quality of the cut. If the disc is new, it does not form sparks, which is very important when working in rooms where explosive dust and gases can accumulate. All consumers who already purchased the Makita LC1230 cut-off saw saw that it has excellent performance, even a profile pipe with dimensions of 80x80x4 mm will not be a problem for it. A very convenient addition is the fact that there is a removable tray in the set where the chips are collected.

Negative feedback

No matter how good a tool is, you can always hear negative feedback about it. Of these you can understand that the disc supplied by the manufacturer in the kit is intended exclusively for thin profiles ranging from 1.2 to 1.5 mm.

The disadvantage, according to buyers, can also be considered the lack of a smooth start. Some buyers also note an impressive weight. Among other things, the use of the unit is not always convenient, because it is easier to measure the workpiece in the right side, rather than in the left one. Therefore, there is a need to turn the roulette wheel.

Why else should I buy Makita LC1230

The described equipment creates quite a bit of noise, the workpiece is slightly heated, but this is not so critical. The workplace is kept clean, because the sawdust gets into the tray. Among other things, there is no unpleasant smell of burning material, as when working with abrasive disks. It is impossible not to note the acceptable cost, which will be available even for the average buyer. By the way, it is 26,220 rubles. Saw pendulum mounting Makita LC1230 can be an excellent solution for domestic and industrial use. Disk almost does not wear out, even if you use it to implement several hundred cuts.

Cost of consumables

Makita LC1230, a drive for which you can be purchased for 2360 rubles, is sometimes supplemented in the process of using consumables produced by other companies. However, if you prefer original spare parts, then you should also pay attention to the saw blade for metal, the dimensions of which are 305x25.4 mm. For such a disk will have to pay 17400 rubles.

If you are interested in a saw blade that has 60 teeth, then you will have to pay for it 8800 rubles. Its landing diameter is 25.4 mm, while the diameter of the disc itself is 305 mm.

Conclusion

In order for the user to quickly and safely change the working attachments themselves, a saw is provided in the saw to fix the spindle. Among other things, a person is reliably protected from unintentional switching on of equipment. The locking system is responsible for this. The receipt of accidental injury is completely prevented by the fact that a reliable casing is put on the saw blade. The saw is convenient in transportation, because it has a relatively small size.