Fishing nets for braids: description and step by step instruction. Knots "palomar", "kinche" and others for braids

Currently, there are many varieties of fishing knots. In addition, they are constantly being improved and refined. Some methods of knitting fishing lines have been known since the time of grandfathers and are classic, and some methods of fastening appeared with the advent of new gear. For example, not everyone knows the nodes for the braids. Therefore, for some people, sometimes the need to bond two sections of fishing line of different diameters and rigidity becomes a real problem.

Node Features

Many anglers, having learned several types of knots, suitable for conventional or monofilament fishing line, do not even try to delve into the features of the braids. But they need special methods of connection. The simple nodes for the braids are not always suitable. Often they even weaken the mount. In the manufacture of this tackle, different types of fibers and their weave are used. In addition, the difference is visible in the method of soldering. The braids may contain different amounts of fibers and outer coating compositions. All these features must be taken into account when choosing the connection methods. But here often come to the assistance of manufacturers of weaving. They indicate on the packaging the most suitable node for the given tackle. Most often recommend two ways of fastening. This is the node "Palomar" and "Yuni". But this is far from the only methods of connection, although it is absolutely necessary to know them.

The unit "Yuni" ("Greenner")

Nodes for braids should be strong and reliable. The most suitable is the "Yuni" site, or as it is also called "Greenner". It is used to bind swivels and hooks, with very small ears. In this case, it is not possible to stretch a double line through such a hole. This node is recommended by many American manufacturing companies, for example, the notorious company Power Pro. Knit it is quite difficult, here you need skill and experience. To hook the hook using this method, you need to do the following: The end of the braid is passed through the eyelet. Then a loop is formed. The end of the braids is wrapped around the main line. This produces the second loop. Inside it pass the end of the braid, while making 5 to 7 revolutions around the double line. The resulting node is tightened and cut off excess.

"Palomar" node for braids

This knot is light and fast. It is suitable for binding hooks, carbines and swivels. The "Palomar" knot is applicable for most cases, and is suitable not only for braiding, but for ordinary woods. With the help of this fastening, most spinners tie artificial baits. While this site is universal, it is also very simple.

So, the node "Palomar" for the braid is made in the following way. Fold the line in half and pull through the eye of the hook or ring of bait. Next, make a loop and skip the end of the double line inside. Do not delay. Now, attention, we pass through the bend (the point of the bend of the line folded twice) hook or swivel. Now we moisten the braid and tighten the knot. The drawback of this knot is that it is not possible to stretch the double line to each ear. Also, it greatly shortens the length of the leash. This must also be taken into account.

Knot "Clinch" for braids

This is another way to reliably tie a hook or swivel to the wicker. This site is simple, and it's easy to learn. It is suitable not only for braids, but also for conventional fishing line. To tie a knot "Clinch", you need to perform a few simple actions. In the eye of a hook or a ringlet swivel we pass a piece of braid. Its length should be at least 15 cm. Next, we take the end of the cord and wrap the main line about 6 times. But do not make the rings too tight. Now the end of the braid is passed through a small loop formed around the eye of the hook. And then it must be passed through a large loop. We wet the braid and tighten it. The knot "Clinch" was obtained. For braids - this is the best option. Fastening is reliable and strong.

Bloody knot

Due to this knot it becomes possible to connect two pieces of braids or a different line with a diameter. In this way, you can even connect cords. Although they can differ in thickness by a factor of 1.5-2. This node is quite capable of connecting the main line and the leash made of monofilament. The mount will be very reliable. This method of binding must be known to every fisher.

So, the "bloody" knot for fishing lines and braids is performed in the following way. We take two pieces of the cord and place them parallel to each other. The ends should be directed in opposite directions. Now perform the following actions. Take the first end and wrap around the second braid 5-6 times. We do not tighten the turns very much. Now you need to pass the end of the cord through the connected lines after the first turn. Then we do the same with the second segment. The number of turns must be the same. The end of the second segment of the braid is threaded into the same loop as the first. But at the same time he must "look" in the opposite direction. Wet a bit of the braid and tighten the knot. The remaining ends are circumcised.

Sliding double knot

Some fishing knots for braids have increased strength and reliability. To these knits belong the known to many experienced fishermen a sliding double knot. It is suitable for woods, wattles and cords, in which the difference in diameter can exceed five times the value. This is very useful when you need to connect two different lengths of different thicknesses. This is perhaps the most optimal option for fluorocarbon. With this method of fastening it is not difficult to tie it to the main line.

So, this knot for plaiting and flurocarbon is performed in the following way. We fold and link the lines overlap. Their ends should "look" in opposite directions. Keep the fingers folded lengths approximately in the middle. Now one end of the line is wrapped to the fingers. A loop will be produced. In it we pass the end of the braid and, wrapping both segments, we make from 5 to 7 turns. Now, moistening the line, tighten the end. It turned out one node. Now we do the same on the other side with the second end of the line. As a result, on a common site, we will have two nodes. Now it remains only to pull the connected lines in different directions. Nodules converge at one point. The extra ends are cut off. This method is similar to a "bloody" knot, but it is more reliable.

How nodes affect the quality of the braids

To determine the best fishing knots for braids, it is necessary to understand, and how this or that method of binding affects the characteristics of the line. It is known that any type of fastening inevitably leads to deformation of the fibers. But the degree of damage and, as a consequence, the loss of strength braids are different. So, when you bind a swivel or, for example, a hook, no matter which method of connection is selected, you still have to perform the same action at the end - tighten the node. In this case, the inner layers of the braids are displaced, this leads to a change in its structure. Some fibers are strongly stretched, while others experience excessive tension. All this leads to a decrease in its strength.

According to the shape of the section, the braids are round and flat. When the knot is tightened, the line is twisted. This on separate fibers leads to stress. But if the braid is round, then it will be insignificant. But flat braided fishing lines will experience strong tension and will lose a greater percentage of strength. Fishing knots for braids should be chosen consciously. If improper knitting is done, it will weaken all the rigging, which will lead to the loss of not only hooks and artificial baits, but also trophies.

Conclusion

The nodes considered above for the braid perfectly retain the strength of the tackle. They are simple and allow you to quickly tie a trolley or a lost hook. In addition, with their help you can connect different thicknesses of fishing line. And this happens sometimes, if you need to install a leash on the rigging. It is not necessary to know them all. It is quite enough and two or three to get out of any position and not to lose the trophy at a crucial moment when vyvazhivanii.