Feeder tackle with own hands

For all lovers of fishing on the feeder, probably, will be an interesting question: how to make a feeder tackle and how to assemble it? After all, there was always a huge risk of losing several feeders, which have always been one of the main consumables. Feeder tackle with their own hands is an economy and a lot of fun from the work done.

For a significant reduction in the price of your favorite fishing, it is worth trying to make a tackle for the feeder yourself. About how to make and how to collect a feeder tackle with our own hands, let's talk in more detail:

There is a very simple method of producing feeder gear: first go to the nearest building store that is in your area, and buy there a direct suspension from the metal (it is usually used to fix cardboard from gypsum). Also, you will need to take small accessories for mounting the feeder and the plate of lead.

You will also need these materials:

- The line is about 0.2 or more, but in no case is it thicker than the main one;

- Carabiner with swivel (take the whole package).

The following method for manufacturing feeder feeders may initially seem very difficult, but you will not need any supernatural technology. There are a lot of Umeltsy in the country, but this method is for those who are not afraid to take the tools into their hands.

Feeder tackle with their own hands is made as follows:

1. First we take a piece of fishing line length in the scope of both hands (the diameter should be slightly larger than the leash with a hook), add it in half and make a knot, you can double. Before this, we deviate from the bend by a couple of centimeters. Here we will fasten the leash with a hook.

2. Both ends of the line should be spread in opposite directions, holding with the help of a loop in the middle, we start to twist in different directions.

3. The scimitar must be twisted like a pigtail.

4. We fix the received pigtail by a knot, preferably double.

5.At any end of our fishing line we put on a carbine with a swivel.

6. We make a large loop and fix it again with a double knot. Only the side on which the swivel is located should be slightly longer than the second (by 5-20 mm). The loop on the trough will be made softer that will allow the trough to flow around freely any obstacles on the fishing.

7. Cut one end of the line, bend the other in half and fix it with a double knot.

Then we hang it to the main line for a loop.

8. You can cut off all unnecessary ends of the line.

Now we see that the feeder tackle with our own hands is quite easy and several times cheaper.

In addition, there are a few tips: it is advisable not to leave any joints on the outside of the feeder when it is manufactured, as this can lead to hooks on the grass cover, rocks, tree roots or any of the objects during fishing.

Self-made tackle, has one significant advantage - very quickly rises to the surface of the water when you are fishing on the feeder, this is due to the body of the manger. Weight feeder for the feeder is regulated by lead.

Another of the important advantages of self-made tackle is that the center of gravity of the feeder is displaced, and this in turn prevents rolling on the current during fishing. But if you put another feeder on the same swivel, they will work in pairs even in very strong currents.

Feeder gear with their own hands will be very pleased not only you, in your hobby, but also your friends, whom you will take with you for fishing. After all, all the most pleasant and joyful, always want to share with people close in spirit. At the end of the production of gear, you will be able to exchange experiences and talk about how to make a feeder tackle and how to assemble it. Do not doubt that fast enough, you will become a truly competent specialist in this matter.