Drawer for seedlings with your own hands made of wood: sizes, photo

A novice amateur horticulturist, choosing a container for seedlings, can get puzzled. A wide variety is confusing. But it is not necessary to hurry and it is necessary to determine in advance what it is to plant the seeds, otherwise the results of the sowing season can upset you.

Selection of containers for seedlings

Most often, individual pots or boxes are used as a seed tank. Pots can be either special, purchased (plastic or peat), and homemade from a glass of sour cream or yogurt.

Advantages and disadvantages of individual pots

Individual packagings have their advantages. So, for example, when transplanting seedlings, it is enough to dump the contents of the pot to the ground, which ensures the integrity of the root system. However, with a large number of seeds, the use of pots is difficult because of the inconvenience of their location in the apartment and subsequent transportation. Individual containers require a lot of space.

Boxes as a container for seedlings

Another thing - containers in the form of boxes. Their ergonomics is such that in a relatively small space it is possible to plant many seeds, which saves soil. Moreover, the boxes are mobile and very convenient to transport.

Boxes for seedlings can be made from a variety of materials and have different sizes.

You can buy a ready-made container of factory production or, if you want, try to save some money by making boxes for seedlings with your own hands from improvised materials.

The purchase of ready-made packaging has its advantages, such as:

• Saving time;
• A diverse assortment with a rich selection of colors, shapes and dimensions;
• All the necessary accessories are included;
• Materials are tested on a large number of plants.

Of the minuses - the need for monetary spending, especially if you need a lot of boxes for a large number of seedlings.

If nevertheless it is decided to make containers independently, then the first step is to determine the material and dimensions. Widespread boxes:

• Made of wood;
• Plastic;
• Paper;
• Tin;
• Foil cardboard.

Each material has merits and demerits, it differs with operational properties and scope of application.

Before building boxes for seedlings with your own hands, the dimensions should be clearly defined. In most cases, the transverse dimension is determined by the width of the sill or other area on which it is planned to arrange containers with seedlings. The best height of the box is from 6 to 8 cm. Most boxes are rectangular, but there are also square, with a side dimension of 45 cm.

Boxes made of wood

For the apartment the most convenient are the wooden boxes. Moreover, wood is a natural and environmentally friendly material. But it should be remembered that before each use of a wooden box it must be carefully sterilized in order to prevent the disease of sprouts.

A box for seedlings with your own hands made of wood is easy to build. Carpentry does not require special skills. When preparing packagings, the following tool should be prepared:

• Saw or jigsaw with a file on a tree;
• Hammer or screwdriver;
• roulette.

Materials will require:

• Edged boards or slats;
• Corners;
• Loops;
• Nails or screws;
• polyethylene film.

In order to collect wooden boxes for seedlings with your own hands, the following procedure is useful:

1. Cut slats or boards of the required length.

2. With the help of corners and hardware a rectangular frame is assembled.

3. Construction and fastening of the bottom of the box. In this case, it is important not to forget to provide clearances between the boards to ensure drainage.

4. The hinged lid is fixed by means of hinges.

When you have built a box for seedlings with your own hands, it is important not to forget to make a plywood tray for it. The bottom of the box should be covered with polyethylene to prevent water leaks, but you must always provide drainage to drain excess moisture. The excess film is cut with a knife or scissors.

However, wooden boxes are not without drawbacks. Due to the constant moisture, the tree swells, causing the structure to warp. In some cases, even the rotting of the box is possible, which is dangerous for seedlings. Therefore, wooden containers are recommended to be changed every few years.

Plastic boxes

Not bad in operation boxes made of polymer materials. They are free from the drawbacks inherent in the tree. Quite often they are divided into several sections. Plastic containers protect seedlings from temperature jumps. In addition, such boxes are easy to clean and not subject to deformation. But to build plastic boxes for seedlings with their own hands is difficult, it is better to buy ready-made sizes.

It is possible to re-arrange the plastic packaging containers for seedlings, but in this case it will be necessary to drill a few drainage holes in the bottom to drain excess moisture. Otherwise, the root system of plants may begin to rot. Drainage holes should not be too large, but not too small, and they should be located often enough.

Paper containers for seedlings

In order to produce a box for seedlings with their own hands, in addition to wood and plastic, paper and other improvised materials are widely used. The prime cost of manufacturing is extremely low, which attracts many gardeners and gardeners.

Before you start the process of packaging assembly, you should prepare in advance all the paper raw materials (newspapers, waste paper) and tools - scissors, scotch tape, plastic bottle.

The sequence of manufacture is as follows:

1. Newspapers are cut into strips so that their length exceeds the circumference of the plastic bottle.

2. The cut strip is wrapped around the bottle and attached with an adhesive tape. Part of the newspaper will go to the bottom of the glass, which is also fixed with tape.

3. The resulting paper glass is separated from the bottle.

Containers made of foil

Making a box for seedlings with your own hands, you can use used foil containers, such as, for example, juice bags. Because of the additional reflective layer, plants will receive more sunlight, the sprouts do not have to be stretched excessively. Tara is compact enough and can fit even on narrow windowsills.

When constructing a foil box for seedlings with your own hands, you need to stock yourself with a clean empty bag, which should be cut using a mounting knife or scissors.

The container from a dense foil cardboard allows repeated use.

The listed ways of self-manufacturing boxes are simple and effective. Nevertheless, if it does not work from the first time to make a box for seedlings by yourself (photo is in the article), then for example you can see the finished products in magazines on gardening.

Care of seedlings in boxes

Due to the fact that the seeds in the boxes are planted in rows, after the shoots, it is necessary to thin out the seedlings and hold a pick. It is necessary to start the picking as soon as shoots begin to acquire the first leaves, otherwise rapid growth of the root system will cause the seedling roots to become entangled in one large tangle.