Doless generators with our own hands

If you live in a suburban village or have a summer residence, you can certainly face a problem of poor voltage or in general a normal current supply. Such a disaster, unfortunately, is not uncommon in the backwoods of Russia, so you need to have an alternator at your fingertips so that problems with tension do not take you by surprise . And it is not necessary that it should be petrol, because the price of fuel is gradually increasing. It's enough just to make a machine that works on wind energy (that is fuelless). Of course, there are a lot of such devices, therefore, for the sake of economy, it is most reasonable to make fuelless generators by oneself . How exactly this is done, let's find out.

The algorithm of action

First of all, it is necessary to get acquainted with the principle of work of this tool. The essence of supply and conversion of energy windless fuel generators are quite simple: when the wind acts on their blade, the device rotates, thereby transferring energy to the rotor and multiplier. In turn, the last mechanism drives an electric generator. Further along the circuit, the current is fed into the system, that is, into the house.

Choose the type

Now you need to figure out what kind of fuelless generators you'll make by yourself. There are several categories of this device: horizontal and vertical. The latter are more simple to manufacture, besides they have a high current delivery capacity. Therefore, we will consider this type.

We think over the design

Doing non-fuel generators with your own hands, draw a draft in the beginning and in advance, think out what kind of device the design will have. Pay attention also to where exactly it will be installed and run. It is important that the air flow does not block the wall of the house. If it's a cottage, you can install it straight on the roof (or rather near it, since the device itself should work separately from this surface). There are no other options, since in apartments, where, as a rule, the supply of current is always good, few people are involved in such a thing.

Remember that fuelless generators are mounted on a three-point concrete foundation with their own hands (that's why you do not need to install it on roofs, chimneys, etc.), which is poured into an open trench after installation of the mast. It is important to observe that its length is as high as possible, since the airflow can decrease when passing through trees and other buildings. To make it easier, use the finished structure in the drawing. Next, focusing on your sample, get down to work.

The rotor must be made with a pulley, which would transfer the motion from the blades. By the way, the latter can be made from any metal barrel: cut it with a bulgarian and twist the excess sides. Do not forget to mount the battery and plug them into the main circuit where there is a generator (BTG) and wires. The latter will just conduct a current into your house. Remember that it is not necessary to mount car batteries for non-fuel generators. Acquire specially designed for such needs batteries. They are designated as accumulators for alternative energy.