Colored masonry mixtures. Advantages of use and characteristics

Colored masonry mixtures appeared on the Russian construction market not so long ago, but immediately gained enormous popularity. And there is nothing surprising in this. After all, with their help you can build very beautiful buildings and structures. In what cases is this material used and what performance characteristics is different, consider later in the article.

What are colored mixtures

In the same way, as well as from conventional, solutions for laying bricks are prepared from colored dry mixtures . You can use them to build any buildings. This mixture differs from the usual only the presence of a certain color. It can be selected both in the tone of the masonry, and in contrast. Thus, when using this material, there is no need for additional stitching with colored grouts. Using it, you can build a very original design on the wall.

Composition of mixtures

Color mixture mixtures consist of:

1. Cement of high brand.
2. Mine fraction sand. When making the mixture, the ratio is selected as carefully as possible. The result is a material with excellent performance. In addition, manufacturers closely monitor the fact that the mixture does not get clay. Therefore, the masonry from it turns out to be strong, and the seams do not crack.
3. Dolomite flour. Additionally increases strength.
4. Mineral colored pigments. Due to the fact that manufacturers use only high-quality additives of this type, the seams do not fade with time and do not crack.
5. Polymer additives. They are designed to improve the adhesive properties of the material. In addition, their presence in the composition increases the moisture resistance of the solution.

Benefits of using

The use of this material in the construction of buildings and structures in comparison with conventional concrete gives the following advantages:

1. Dry color brick mixes for a few hours.
2. Variety of shades and colors. If desired, you can choose the material for any design of the walls.
3. Absence of "efflorescence" in masonry mortar.
4. Worth this material is not too expensive.
5. The stitches look very neat. The use of such a mixture makes it possible to hide small defects in the masonry. As a result, the walls acquire a neat, finished appearance.
6. Colored masonry mixtures are characterized by frost and moisture resistance.
7. In addition, they are completely environmentally friendly.

How and where to use

There are only two options for using such mixtures. They are simply irreplaceable when it is necessary to achieve the selection of the color and texture of the brick itself. In this case, use a solution of contrasting hue. If it is necessary to make so that the seams are invisible against the general background of the wall, the material of the same color as the brick itself is used.

The masonry mixture of this variety is used for the construction of both internal and external walls. In addition, it is just great for carrying out various kinds of work related to the finishing of structural elements of buildings. For example, very often such mortars are sealed by tile joints. Also, these mixtures are used in laying pavers. Another area of their application - finishing fireplaces, chimneys, plastering surfaces.

How to prepare a solution?

The solution is prepared in exactly the same way as from conventional mixtures. Dry material is diluted with water to consistency of sour cream and thoroughly mixed. Before use, the solution is allowed to stand for an hour to obtain a good dispersion. In the winter, specialists recommend that the mixture be diluted with warm water only. In any case, the resulting solution should be worked out within three hours, otherwise it will start to solidify.

How are masonry and grouting done?

Masonry using such solutions is performed on a full seam. The screed is produced in the usual way. In the event that a mixture of light shades was used, only wooden or plastic tools are used. When making grouting, the seams are previously cleaned of dust and dirt. Then they take out the crosses. Then, a solution is applied.

Kneading should be done strictly following the manufacturer's instructions. The fact is that surpluses of water not only reduce the strength characteristics of the composition, but also change its shade towards a lighter one.

Perel Color Mixes

The most popular today are the Perel masonry mixes. They are made using only the highest quality materials. In addition, they are distinguished by a wide variety of colors and shades. If desired, you can buy a white mixture, super white, gray, chocolate, red, yellow, cream, beige, etc.

A Perel masonry mix is made using only high-quality, no-dilute cement. The preparation of a solution from a dry material is an extremely simple process. Strength is the same the finished mass is gaining almost instantly. Another distinguishing feature of mixtures of this brand is that the solution prepared from them is characterized by a high degree of plasticity. This facilitates construction and repair work.

In accordance with the degree of water absorption of the brick, you can choose a mixture of Perel NL, Perel SL or Perel VL. Such a variety allows you to perform quality masonry in any case.

Use such an interesting material as colored mixes, when building walls and partitions of buildings, as well as performing various kinds of repair work, it is certainly advisable. Excellent characteristics of these substances - guarantee the quality of finished structures and their aesthetic appearance.