Color masonry mortar: overview, types, characteristics and reviews

Masonry mortars have been used in construction for a very long time, but their color variety is an innovative development and has already gained its popularity. If you want to give the house a unique color, you should more carefully approach the choice of mortar for masonry, which can have a wide range of shades and colors. Thanks to the use of such a solution, the decoration will stand out against the background of other materials, because no single seam will be visible. That is why such compounds, despite their higher cost compared to the standard analogue, continue to gain popularity. In addition, you can cook them yourself, which reduces the cost of repair and allows you to get interesting solutions.

The main varieties of masonry color solutions

The color masonry solution is a fine-grained mixture, which is prepared using a variety of well-metered ingredients. These mixtures consist of a certain amount of water, inorganic substances, as well as fine fraction aggregate. Areas of use are repair, exterior and interior decoration, as well as brick and stone masonry. On the basis of what astringents will be in the composition, you can subdivide color solutions into:

• Air;
• Waterproofing;
• Masonry;
• Acoustic.

The air solution is made of a small aggregate and an astringent air mixture. Waterproofing mortar is made with the addition of "Ceresite", aluminum sodium and iron chloride. Masonry compositions are made of clay, lime or cement, and also water. As for acoustic solutions, they include astringent fine fractions, gypsum, cement and lime.

A colored masonry solution is obtained by adding to the main ingredients a mineral dye based on iron oxides. The content of this dye can vary from 1 to 8%. If this indicator is exceeded, then the technology can be considered violated. This mixture is used for the erection of external and internal walls with the use of clinker facing bricks, as well as for paving slabs and pavers, decoration of stone and chimneys, as well as facing fireplaces, plastering of building surfaces.

Feedback on the main advantages

Color masonry mortar has many advantages. According to customers, it is convenient to use, because the composition dries out only for several hours, the surface after evaporation of water is not high, the color is different, but consumers can choose a shade at their discretion. Buyers also like low cost.

Overview of color mortar mortars of the brand "Weber.Vetonit"

If you need a color masonry mortar, then you can prefer "Weber.Vetonit", which is used for laying silicate and ceramic bricks, when there is a need to ensure that the shade of seams approaches the color of the brickwork. Among the main varieties of these solutions should be identified Weber.Vetonit ML 5, which is a solution for the laying of ceramic and silicate bricks. While Weber.Vetonit ML 5 P is a solution for laying bricks in winter conditions, when the temperature of the environment varies from +5 to -15 ° C.

Choosing Weber.Vetonit ML 5 T, you will work with a solution that is designed for operation in places with intense precipitation. This includes the shores of lakes and seas. Among the basic quality characteristics of this composition is low water absorption. Color brick masonry mortar is also available in the form of Weber.Vetonit ML 7.5. It is a solution for laying products with low water absorption. Provides a composition of increased adhesion to brick.

Quick-mix RSS

Quick-mix colored masonry mortar is on sale in the version that was mentioned in the subheading above. This mineral composition has water-repellent properties, good adhesion to the side surfaces, and resistance to external negative factors. The compressive strength is greater than 10 MPa, while the use temperature varies between +5 and +30 ° C. The size of the core varies from 0 to 0.63 mm.

Use after the preparation is necessary for half an hour, while the width of the seams can vary from 4 to 15 mm. When preparing a solution for 25 kg of a dry mixture, approximately 4 liters of water should leave, the final volume of water will depend on the method of application of the composition.

Characteristics of masonry mortar "Found"

If you are interested in the masonry solution "Found" colored, then you should get acquainted with its characteristics, among them there are:

• Frost resistance;
• Strength and uniformity of the seam;
• Possibility of use for external and internal works;
• The absence of efflorescence;
• Purpose for facing bricks.

On sale you can find more than 19 colors. The branded compressive strength can be equal to or higher than 15 MPa, you may be interested in the adhesion strength to the surface, which is 0.3 MPa or may be greater. The water-holding capacity is 96%, but for 1 kg of dry mixture will take about 0.1 liters of water.

Characteristics of the "Perfecta Linker Standard" solution

The color mortar "Perfekta Linker Standard" also enjoys popularity among consumers. Its cost is 212 rubles. For a 25 kg package. The compressive strength is 15 MPa, while the bond strength is 0.3 MPa. On a square meter of surface will take about 2 kg of composition, which is true if the width of the seams will be equal to 1 mm. The thickness of the layer should vary between 5 and 15 mm.

It is noteworthy that this solution can be used for a wide range of temperatures, which varies from -50 to +70 ° C. The viability of the mixture after cooking remains for another 120 minutes. The amount of water should vary between 3 and 3.5 liters. It is necessary to apply the solution when the thermometer's column is kept between +5 and +30 ° C.

Conclusion

Vetonit is a colored masonry mortar, which can be chosen among all the others. But before purchasing the product, you need to familiarize yourself with the characteristics in more detail. In principle, each of the above-mentioned compositions is intended not only to achieve a decorative effect, but also to create strength. On sale today you can find facing bricks in a wide range, its colors are diverse, which means that you will always need a colored solution for its styling.