Chemical peeling at home - fast skin rejuvenation.

Peeling is a cosmetic procedure, during which the dead skin particles of the epidermis are removed from the upper layer of the skin. From this, its appearance improves accordingly. This procedure is divided into three main types: chemical peeling, physical and mechanical.

Let's take a closer look at how to do chemical peeling at home. This method is quite simple, but requires accuracy.

Chemical peels well dissolve dirt without damaging the skin. Immediately after application, you can see the results:

- Reduces the depth of wrinkles,

- the skin texture is leveled,

- the complexion improves,

- freckles and age spots disappear.

For this type of peeling enzymes are used that can dissolve dead skin cells. To obtain the maximum result, it is recommended to use them with salicylic, ascorbic and retinolic acid.

Chemical peeling at home with salicylic acid

Take one tablet of acetylsalicylic acid, add a few drops of water and wait for it to completely dissolve. Then add some honey. If you have an allergy on it, then replace the gel with aloe vera. All the well mixed and applied to the pre-cleaned skin. Within a minute, rub the mixture into the skin exactly along the lines of the least stretching. Much attention should be paid to problem areas of the skin - this is a zone of dilated pores with black dots.

This type of peeling is not suitable for too sensitive and delicate skin, as it removes the horny layer of the skin.

Chemical Peeling at Home Using Calcium Chloride

This method of cleansing is more suitable for oily and mixed facial skin. The procedure should be very carefully, and only then you can get a great result.

Before you begin to do peeling at home for the face, it is necessary to test on a closed area of the body and then apply to the skin.

For its preparation we need a solution of calcium chloride 5-10% and baby soap. If you are doing the peeling for the first time, first use a five percent solution or just dilute 10% pure water.

Wadded disk moistened in a solution of calcium chloride, slightly squeezed and gently applied to the skin of the face. After the first layer completely dries, apply the next layer and wait for it to dry again. This should be done four to eight times. For the first time will be enough four times.

When the last layer dries, soap your fingers with baby soap and gently roll the solution to make soap flakes. Massage the face and, if necessary, lather the fingertips again. If there are wrinkles around the eyes, you can work there, but only very carefully.

If everything is done correctly, the skin should not be burned or burned. If this happens, immediately wash off the solution with plenty of water with baby soap.

The procedure should end when you hear a clear scratch on the skin. With a lot of water, we wash off the solution and soap foam from the face.

After the chemical peeling in the home is finished, you need to apply a soothing mask. To do this, you can mix the broth of chamomile with a crumpled banana and chopped oatmeal. The mask is applied for ten minutes and washed off. After it is desirable to apply moisturizer.

Chemical peeling at home is best done in the evening, so that until the morning the skin can recover and calm down. For oily skin, you need to do it once a week, and for dry skin - up to once a month.

Chemical peeling will make your skin smooth, snow-white and elastic in a short time. Do not spend money on this procedure in beauty salons, because at home the effect is neither worse nor worse.