Carburetor Cleaner

The carburetor is a very important part of the "iron horse", which should be in perfect order for its permanent functioning and pleasant driving. Unfortunately, it has to be controlled and prevented so that a complete failure can be prevented. One of the problems of the carburetor can be the pollution of the throttle valve. This is an unpleasant, but extremely common type of fault that disrupts the engine, namely:

• An idling is destabilized;
• Power is reduced;
• The toxicity of the exhaust gases is increased;
• Increases fuel consumption ;
• When overclocking, characteristic "dips" appear.

There are a number of reasons for this, but the main one is a contaminated air filter. If it is clogged, it can not pass air, so that the engine replenishes the defect by sucking air from the branch pipe of ventilation of the gases of spent fuel. It is then on the damper and the idle valve, the contaminants quickly accumulate. In addition, even the carburetor of cars with a small mileage sucks the smallest particles of oil from the crankcase (especially on perehazovkah), so that the carburettor cleaner is necessary even for them. For those who believe that the flushing of the flapper is something fantastic, it is proposed to conduct this procedure for a thousand or two rubles in the service center. For those who know how to handle a screwdriver, locks and has at least an hour of free time, special purifiers are sold. Servicing in the service station is more expensive, and in comparison with independent work there is no longer any difference.

One of the most popular today is the carburettor cleaner Abro. It is distinguished by an affordable price and high efficiency. Like other suspensions, this carburetor cleaner contains penetrants and solvents that remove hydrocarbon, resinous and other deposits from the fuel supply system. The effect of use comes after a short time. Thus, the sticking of valves, the presence of compression rings are eliminated, all kinds of deposits from the combustion chambers are removed. Carburettor cleaner is recommended to use after each replacement of the air filter.

Considering the general worn-out condition of our country's car fleet, far from always favorable road conditions, the service of washing the throttle is today quite high demand. But every day motorists who travel to the service station prefer to buy their own carburetor purifier, it becomes more and more.

Despite the different arrangement of cars, the process of cleaning the throttle valve is carried out by all in the same scheme (sequence of actions). The first thing to do is disconnect the air duct that goes to the throttle assembly from the air filter. The work can take from two minutes to half an hour, it all depends on the car. In the event that you did not have to clean this element (duct) more than 15 thousand km, you can safely purchase a universal cleaner, as the amount of accumulated inside the mud will obviously surprise you.

As for the damper itself, it must be cleaned according to the instructions of the cleaner. When carrying out the procedure, it is worth considering the following. The carburettor cleaner provides the proper cleaning effect when the machine is in the injected state. Owners of the car with an electronic throttle are waiting for an unpleasant surprise. When the cleaning mixture is injected into the throttle body, the engine stalls, and the equipment resets the idling settings. This leads to the fact that the machine will have to be delivered to the service station. Unjustified risk. In the case where the car has a mechanical throttle, after the cleaner (universal or narrow-profile) has performed its work, the idling speed of the engine is reduced to 500 rpm. This is normal. If desired, the idle speed can be increased by adjusting the screw. And everything, the process is over - quickly and economically.