Beautiful life behind a beautiful fence! Choose a fence of proflista

Any summer resident and the inhabitant of a cottage, one way or another, lives in our native country behind a fence, and only on it depends, what this life will be - pleasant and solid or wretched and supernumerary!

Before you start building such a responsible structure as a fence from a proflist (after all, people look at it and think about you precisely on the basis of this kind), you should scroll through all the decent options in your head and count just in case the cash is enough. In a pinch, the last question can be solved with the help of a loan, which is provided by construction firms through friendly banks.

Another tricky question: "Tired of you in the winter rake the snow in front of the gate?" If the answer is yes, then you should immediately start choosing the supplier of the automatic gate.

This must be done before starting the construction of the fence from the profiled sheet for the simple reason that your gate will be manufactured from one to two weeks. Especially if the size of the wicket is non-standard! But the color of the fence from the profiled sheet is better to choose by the color of the gate, since the latter is harder and more expensive to change. Accordingly, and the type of paint is better to choose the quality of the gate, so that they do not stand out.

Now the main thing is to install a fence from the proflist. There are several nuances here. It is better to build a fence from the profiled sheet on a ribbon foundation with a depth of 30 to 50 cm, depending on what kind of soil you have on the site. The more water, the deeper the foundation, the width of 25-30 cm with the extensions at the pillars. Of course, if you have stone clay, and a site on the mountain, you can simply "hammer" the pipes into the clay. In other cases, the fence from the proflist will necessarily begin to slowly but surely bend over, so that, in the end, the gate and gates will cease to close and open. For automatic gates, the foundation is mandatory.

The next moment is the choice of pipes. I advise you to choose a square, around them will be located bricks, and they, as you know, are not round. Consequently, the consumption of the solution will be less, and the brickwork of the pillars will look prettier. If you have planned to put an automatic gate, then do not skimp on the poles of facing bricks. On him, too, do not skimp, this is the most vulnerable place of your fence! Below, on the ribbon foundation, it is better to make 2-3 rows of facing bricks. The fact is that the profiled sheets have standard sizes (if you take non-standard ones, it will turn out to be expensive, but there is no special meaning in this). Therefore, the sheets are raised higher, and the lower part of the fence is laid with a facing brick.

Well, finally, he profiled. Be sure to take the corrugated sheet, painted in the factory, and do not let him cut the Bulgarian! Otherwise, the fence will start to rust the next year, as the bulgarian heats the metal along the edge of the cut. To paint the veins, you can apply paint on rust, but you will have to paint again every two years. And do not plant the fence on "what horrible" self-tapping, in this case, to save stupid!

I want to note that an ordinary fence made from a profiled sheet without separating the poles is also much more economical than wood. It does not have to be painted every year, and it does not "fall in" under the influence of rain and snow. In addition, always aesthetic and neat appearance of your site will be complemented by a neat look of the fence from the proflist!