After reinstalling Windows 7, how to set up the Internet: the instruction

Today we will talk with you about what to do after reinstalling Windows 7. How to configure the Internet in this operating system? What can we need? How long does the process take? We'll talk about all this today. Let's start, perhaps, with the fact that we will discuss some points on the preparation for the process.

Getting Ready

Well, if you do not know what to do after reinstalling Windows 7, how to set up the Internet so that it starts working normally, then let's deal with this difficult issue.

First of all, we need equipment for accessing the World Wide Web. Now it can be anything - from USB-modem to the most usual ADSL-modem. There is a customization method for each device. We will analyze them today.

In addition, if you think what to do after reinstalling Windows 7, how to configure the Internet so that it works fine, then you will have to stock up on time and patience. Quite often in the operating system there may be failures and malfunctions that interfere with normal operation and slow down the processes of setting up the equipment. So let's try to start with you now.

System Preparation

Do you know how to connect the Internet after reinstalling Windows 7? It is not only necessary to prepare yourself, but also correctly prepare the operating system. This will help reduce the risk of failures and malfunctions to a minimum. Especially after a "clean" installation on the computer.

What is needed for this? Install drivers for all connected equipment. Except for the modem, of course. We'll work with him a little later. Instead, take all the drives with the drivers that you have (network card, video card, sound card and so on) and install them one by one on the computer. After carrying out this procedure, do not forget to reboot.

Now we can think about what to do after reinstalling Windows 7. How to configure the Internet? It's quite easy to do this if you know where to start. Let's try with you to deal with more "ancient" equipment, and then we will begin to move on to innovations.

ADSL modem

So, we begin with you to the most common connection to the World Wide Web. In addition, the method considered now is considered the oldest. It implies connection via ADSL modem.

Do not know how to configure the Internet after reinstalling Windows 7 ? We will first have to connect the equipment to the computer. To do this, plug all the wires into the appropriate sockets on the "box", and one end of the "main" wire should be shoved into the computer. It is connected to a special socket on the network card (it is impossible to confuse). After that you can turn on the computer and start working.

We will need to install the hardware drivers. This is done using an installation disc, which, as a rule, goes in a set with the equipment. Are you ready? Then go to the "Control Panel", and then - to "Network and the Internet." There, find the "Network and Sharing Center", and then select "Create a new connection" in the bottom.

If you do not have the Internet after reinstalling Windows 7, then you can continue our actions. In the window that appears, select "Connect to the workplace" and then "No, create a connection". Use "My connection to the Internet VPN". Then click on "Delay the Internet setting", enter the IP address in the "Internet address". Name somehow connect, come up with a password and save.

Return to the "Network Management Center". You will see that a new connection has appeared. Click on it with the right mouse button and select "Properties". We will work in the "Security" tab. Connection type select "Tunnel protocol", and as data encryption - "Connect even without encryption".

Do you think how to connect to the Internet after reinstalling Windows 7? Go to the "Network" tab. Check "Internet Protocol version 6 (TCP / IPv6)" and save. Again, go to "Connection Properties". Now in the "Network" section click on the properties of "Internet Protocol version 4" and enter the ip-address and subnet mask in the window that appeared (you should tell them the provider). Leave the remaining fields empty. Save the changes. That's all.

USB

Do you still think what to do after reinstalling Windows 7, how to configure the Internet to work properly with a computer using a USB modem? As a rule, you do not need practically any action.

You should start with connecting a modem (with the SIM card inserted in advance) to your "machine". It is best to attach the equipment to the socket where it will be more convenient to get it. After that, you will need to install drivers and a special program for working with the modem. To do this, you can either use the supplied disk, or wait a little - installation, as a rule, takes place automatically after the equipment is connected.

After the process is completed, we can enter the program manager, enter the login and password (phone number and password given to you), and then safely use the Internet connection. As you can see, nothing complicated.

USB Router

And here is another interesting method that allows you to use the Internet. This is using a USB router. With him, as a rule, problems arise a little less than with portable modems.

First, insert the SIM card and battery into the equipment. Charge the "machine" with a special charger, and then connect it with a wire to the USB-connector. Turn on the equipment and install the necessary drivers on it. They are supplied complete with a "sim card" and a router.

Now you will need to wait for the installation of a special manager to log into the network. After the process is completed, you can safely use the Internet. It will be enough to dial the login and password, after including the router itself. That's all the case. As you can see, nothing complicated or special.

Wi-Fi

If you notice that you do not have the Internet after reinstalling Windows 7, but there is a computer connected to the World Wide Web with Wi-Fi equipment, then do not worry: you can quickly regain access.

This requires the presence of Wi-Fi on the network card. If this option is not available, then you can buy a special antenna for this venture. Install the drivers for the hardware, and then click on the small scale in the tray. There select your network and click "connect". If necessary, enter the password several times. After a while you will see how the scale began to fill up, and the computer will report a successful connection. You can use the Internet.