A furnace with a water circuit is a useful device

A furnace with a water circuit is considered a universal solution to the problem of quality heating for housing in the countryside. Due to the active circulation of heated water in heat exchange systems, several rooms are heated. Radiators most often serve as such heat exchange systems. The owner of the furnace with a water circuit has the opportunity to completely heat his dacha or cottage. Instruments equipped with a heat exchanger significantly reduce the cost of fuel, heating the room quickly enough.

If you decide to use a furnace with a water circuit, it is worth considering that in severe frosts it must necessarily be heated, otherwise the probability that the coolant will freeze is high. Therefore, experts recommend that in those homes where no permanent residence is planned, add special additives to the distilled water that provide protection against freezing. Manufacturers recommend using antifreezes.

A furnace with a water circuit provides full heating, allowing you to reduce the costs that are associated with heating. This fact is relevant in large part for houses with a large area. Even with additional costs for radiators and cranes, this solution will justify itself very quickly. If you install a furnace with a water circuit, you can gain full confidence that all the inhabitants of the house will be kept warm.

You can consider a wood stove. It is a steel furnace with a wall thickness of 4-6 millimeters. The tubes of the heat exchanger pass between the walls of a similar construction. The heat carrier is heated by the heat released in the furnace. The water circuit for the furnace can be used in any convenient place, which must meet the requirements of fire safety. Thanks to the fireplace system, it is possible to heat sufficiently large areas without damaging the design. Choosing a fireplace type fireplace , it is worth paying attention to such a parameter as the power of the furnace, which directly depends on the dimensions of the combustion chamber. In the passport, this parameter is hidden under the item "Rated power". It is calculated over a certain period of time by experiment. 10 square meters of living space require for effective heating of one kilowatt of power. This allows you to calculate the required power of the furnace for any room.

The selection of radiators is also a very important stage. It is worth paying attention to cast iron products, since they have the highest heat emission. To determine how effective a heating furnace with a water circuit, you should rely on such indicators as heat transfer, heat transfer and convection.

The use of a brick kiln is quite effective, as it allows for the provision of autonomous heating of a large area, allowing at optimum consumption of firewood to maintain a comfortable room temperature. The furnace can be simply heating or cooking-heating. The efficiency of such a system approaches 85 percent, which is a very high index.