A booth for a dog made with his own hands is just a springboard for creativity and self-expression of the owner

If you have a country house or cottage, then for sure together with you there will be the most faithful friend of man and his formidable guard - a dog. And this means that for the dog you need a warm, comfortable and beautiful home. The easiest way is to build a booth for the dog yourself.

First of all, you need to determine the size of the dog house. It should not be too large, since then the dog will freeze in it in the cold. But too small a house will be extremely uncomfortable. Booth for a dog with his own hands must match a particular animal. Therefore, we make some measurements and calculations.

The width of the hole is easy to determine by measuring the breadth of your pet's chest and increasing this size by 8 centimeters. The height of the manhole is calculated by subtracting 5 centimeters from the height of the animal at the withers. Now we will measure a four-legged friend, as they say, from the tip of the nose to the beginning of the tail - this will be the width of the dog's dwelling. The height of the dog corresponds to the height and depth of the kennel.

In order for the dog booth to be comfortable and warm, you should use a coniferous tree, a lining and a hundred one hundred, one hundred and fifty and forty by forty. Also useful is the grooved floor board, small moldings or fillet, in another - a narrow symmetrical skirting board. And for beauty we need more decorative raki. Do not forget to prepare a plywood for the floor, roofing felt on the roof and a heater. For fastening, galvanized nails with a small bonnet are also useful. It's great if you have impregnation "senes" or "pinotex", which prevent the appearance of mold on the tree.

Since each owner wants to make a booth for a dog convenient, the roof must be provided with a removable one. This is done so that you can clean the room and sanitize it, as well as in case of dog disease. In order not to injure a sick animal by pulling it out of a secluded place, where it usually hides, with a removable roof the veterinarian will be very comfortable to perform medical manipulations.

You should also take care of the booth for the dog, made by hand, had a warm floor. Therefore, it is best to do it double. In addition, it is necessary to carefully sand it and take care not to stick out the point of the nails anywhere. And the hats, as already mentioned above, should be small and not stick out from the floor and walls so that the dog can not get hurt.

The entrance or climb to the kennel is best placed not in the middle of the wall, but on the side - so the dog is the easiest to hide from the wind. And it should be planned on the long side of the booth. Booth for the dog with his own hands should be at the highest point of the yard so that during the precipitation the water does not flow into the interior, but on the contrary, it goes down.

To begin work on a dog house is best from the floor, to which then it will be necessary to attach the side racks. Then on them it will be necessary to fill the boards prepared for the walls. During operation, care must be taken to ensure that the beams of the timber are strictly vertical. Booth for the dog with their own hands will be stable and strong, if the master does not neglect the basic rules of building a dog house.

After the walls of the kennel are erected, it's good to take care of their warming. Perfect for this function is suitable foam. Although you can use other heaters, which you have left from the warming of your house. After that, you can take care of the exterior design of the house. Above the booth must be sewed with a lining.

Some owners on the lap sew a piece of soft rubber, for example, an old mat from the bathroom. Smart dogs quickly master the skills of using such a kind of door. But it's better to attach it later, when the animal gets used to its new home.