Workbench for garage with own hands

Workbench for the garage will allow to equip the workspace, and also make it as comfortable as possible. If you can create such a design, the place will become ergonomic, which will guarantee an effective and safe operation.

Bench characteristics

Regardless of what design features the described design will have, it should be a desktop that has enough impressive dimensions and excellent stability. These qualities are necessary in order to be able to handle products and structures with a wide variety of dimensions.

When designing, it must be remembered that the parameters of the workpieces to be processed will depend on the characteristics of the workbench, while manual and mechanical work is practiced, in the latter case electric tools such as a plane or a drill are used. If you make a garage workbench, then its typical layout should include the presence of some elements, among which are the stop, the bolt slot, the upper support bar, the upper end bridge, the square head bolt, the lower end bridge, the leg, the shelf, the vice, Overhead sponge, hanger, front jumper. As for the last element, it should be located not only from above, but also from below.

Features of individual elements of the bench

The working surface of the structure should be made using a massive board, you must choose one that has a thickness of 60 millimeters or more. In order to make a lid, experts recommend the use of hardwood, among them beech or oak. If you use this advice, then the described elements do not have to be changed periodically, which is due to the excellent wear resistance of the material. It is important to seriously approach the manufacture of the vice, which is intended to secure the processed elements and parts.

Large vise can be made from wood, but small ones are preferable to perform using metal. An important part - bench supports, they are intended to improve the quality of structural stability. Their connection should be made by means of longitudinal laths. For the work on them it is desirable to use softwood, for example, pine or linden. Making a workbench for the garage, in the space under the work surface, you can install drawers. They are mounted on supports and are intended for storage of tools and any other working accessories.

Construction of a workbench

When you are engaged in the development of the project, you need to take into account all the design features, among them - stationarity or mobility of the structure. If you decide to give preference to a portable workbench, then as the most appropriate solution will be weight reduction due to the appropriate material, which should have less impressive thickness. The mobile workbench for the garage is modified using a collapsible countertop, as well as legs of a folding type.

You can make a mobile workbench, which will be designed for minor manipulation and repair work. Most often this design is used by craftsmen who process small pieces of wood. A stationary table can also be made, it is used for processing more massive workpieces and heavy boards. It is simple enough to make, and it will be necessary to install it in one place, during which it will remain in operation. The design can be demountable, it is convenient to use, because you can replace individual elements.

Choosing the right place

If you decide to make a workbench for a garage, you need to choose the right location. It should be near light sources, it is desirable that they are natural. Local light sources need to be installed. Do not forget that there should be electrical outlets nearby. All wires that will be in the working area must be protected by a box or corrugated pipe. Before you begin to build the product, you need to determine the final height of the working surface. To do this, the master must lower his hands down, and afterwards place the palms parallel to the floor. The distance between the palms and the floor and will determine the height of the working surface. For the reason that the workbench is most often designed for one workplace, the length of the table is best done within one and a half meters, as for the width, it should be equivalent to 0.8 meters.

Selection of materials

If a workbench for the garage with their own hands is made, it is important to choose the right materials, as they will determine the stability and strength of the structure. As an optimal option, a planed beam is used, which is ideal for making legs and frame frames.

Dimensions of planed timber

For the legs, it is preferable to use a bar, whose cross-section is 100x70 mm, while the bridges will be made of material with a section of 100x50 mm. For the manufacture of table top it is recommended to purchase boards, the thickness of which is equal to five centimeters. It is permissible to use a single canvas, it can be an old wooden door or chipboard. Excellent if its surface is laminated. It is better to give preference to wood species like beech, maple and oak.

Technology of work

The drawing of a workbench for a garage, presented in the article, will allow you to determine the dimensions and design features. However, it is important to remember the technology of work. Initially, it will be necessary to assemble the base, after the installation of the countertop begins, at the final stage the equipment is mounted on the work surface.

Assembling the base

The base is a wooden frame, the installation of which is done in such a way that the product is the most stable and rigid. This is especially important, since the table will be subjected to heavy loads. For this, a bridge must be provided between the legs, which will be located horizontally. In the middle along the length of the construction it is necessary to install the king. These elements must be fixed in steps of fifty centimeters from the floor surface. Subsequently, they can be used to strengthen the design and to install shelves, as well as boxes.

Beams that fall into the structure of the base, it is necessary to fix by means of the connection "spike-groove", whereas in the areas where such a lock can not be provided, self-tapping screws should be used. Initially, it is necessary to prepare the spikes and grooves following the existing drawing. Only after the gluing of joints with the help of joinery glue. When stationary workbenches for a garage, photos of which are presented in the article, are manufactured, one or several sides can be strengthened to the wall surface, this will guarantee even more impressive stability of the structure.

Manufacturing and installation of table tops

When a workbench is made for the garage with your own hands, the drawings help the master do the work without making mistakes. When constructing a countertop, do not forget that it should be somewhat more than the very foundation. From pre-prepared boards you need to build a massive shield, to fix, you should use long nails, they need to be driven from the inside of the boards, which excludes the ingress of debris into the existing cracks. For tops, you can not use materials based on pressed chips. This is due to the fact that it does not meet the requirements that are imposed on sustainability.

To the table top you need to nail down several bars that will be located across. For their fastening, it is necessary to provide for the presence of grooves in the base. To the jumpers with the help of screws it will be necessary to fix the slats, which will be placed horizontally. They are required for the movement of boxes. The worktop must be fixed with bolts to the base. To do this, using a chisel in the upper part of the base bars, you need to make a groove, while in the tabletop drill holes for the installation of bolts. The heads of the latter will have to be drowned by drilling holes of the required diameter. In order to exclude injuries from splinting during subsequent work, the table top needs to be sanded several times, and then covered with linseed oil.

Equipment installation

Have you decided to make a workbench for a garage with your own hands? Photos of similar constructions are presented in the article. At the last stage you can install the equipment. To the tabletop you need to strengthen the vice, for the installation of which you should provide for the presence of depressions in the end. In the place where the vise will be installed, the plywood should be reinforced from the underside. Mounting must be done with nuts and bolts. Do not place this element on the edge, which will contribute to the displacement of gravity during the work. Locksmith workbenches for the garage, as a rule, also have wooden clamps. If necessary, you can install a circular saw and a Bulgarian. Everything depends on the needs of the master.

Conclusion

Metal workbenches for a garage are rarely made. Such designs are more expensive, but more durable. Decide which material to use, should master.