HomelinessBath or shower

Why does not the water get a washing machine? Causes

Modern washing machines are complex devices that have a number of additional functions and modes designed to perform a variety of tasks in order to facilitate the work of their owners. In this case, this technique has a lot of protective systems, protecting it from damage or disturbances in the technical process. In view of this, even the smallest breakdown can cause the user to have difficulty operating and usually leads to a call to the wizard, which is directly related to additional costs. However, if a washing machine does not pick up water, then sometimes it is enough to perform certain actions or to perform self-repair in order to save money and not to contact the service center for trifles.

Types of breakdowns and their elimination

To begin with, it's worth mentioning that all the methods listed below are suitable for almost all models of such equipment. These are the simplest manipulations that can be made independently without analyzing the unit and not having a special education. When the washing machine does not pick up water and everything described below does not help to fix the problem, it is worth contacting the service center.

No water in the system

This reason is trivial, but first of all it is worth checking it. The fact is that many housewives are sometimes so carried away by domestic concerns that sometimes they forget that this product needs to be fed from the water supply system. Therefore, if the washing machine does not pick up water, then try to open the tap and make sure that it is in your apartment. This behavior of the device is possible with a small head.

The crane is blocked

Very often when connecting such devices to the water pipe installed a special tap, which blocks the access of liquid to the unit. Sometimes it is almost not used and its existence is simply forgotten. As a result, if you block it, you can immediately not guess the reason for this behavior of the device. Therefore, if the washing machine does not pick up water, then it is worth checking this locking mechanism and, if necessary, putting it into the open position.

Violation in the process

Sometimes this technique very often behaves strangely if the program made a mistake. When the washing machine picks up and drains the water before the washing starts, then this can refer specifically to this type of mismatch. What to do:

  • First of all, pay attention to the presence of laundry in the drum. Some models in the absence of it can either not gain liquid at all, or immediately drain it.
  • Sometimes such a defect occurs already in the process of washing, which is usually associated with a large weight of the laundry itself or its uneven distribution. Modern technology is equipped with just a huge number of sensors that control the whole process.
  • Individual models control the closing of the loading door and even the tray, into which the powder is poured. Therefore, it is worth checking the density of their adherence to the body.

Such violations in the process usually have their own error code and are often displayed on the device's working panel. Some manufacturers give the decoding of these signals in the operating instructions.

Door failure

If the washing machine does not collect water, the reasons for this behavior are most often associated with a malfunction in the door. The fact is that a special sensor is installed on its lock, and if it does not work properly or fails, then there will not be a supply of liquid. It is worth noting that it is quite easy to replace such a part, and in some models it can be performed without disassembling the device. Very often, users simply remove the sensor itself, closing its contacts, but then the lock stops holding the door, which can lead to its spontaneous opening during spinning, when the vibration increases.

Filter clogging

If you are wondering why the washing machine does not pick up water, it is worth taking into account certain design features of the model. The fact is that at the entrance to the feed system of the device very often a small filter is installed in the form of a metal mesh. It must be periodically cleaned:

  • First, disconnect the hose of the machine from the water supply. This may require a key, since the hose is connected through a special coupling.
  • At one end of the connection pipe, a filter is usually installed. It must be cleaned.
  • In some cases, the metal mesh rusts and completely fails. In this case, it must be replaced.
  • At the end of the work, the system should be reassembled by connecting the hose to the water supply.

Damage to the intake valve

If the washing machine "Indesit" does not gain water, then sometimes the reason for the malfunction of the special intake valve, which is located at the entrance to the device. A similar defect is inherent in aggregates and from other manufacturers, since this element is common for all products of this type. It should be noted that its design is designed in such a way that if it fails, it switches to the "locked" position to prevent flooding.

Independently to eliminate such a breakdown is quite difficult. To do this, you have to disassemble the device, disconnect this node from the water supply system and disconnect the controller contacts from it. After that, the valve is removed and replaced. Elimination of such a malfunction can be attributed to minor repairs, although its cost directly depends on the price of the necessary part.

Pump failure

Only the master can diagnose such a malfunction. However, if the tank itself is full, there is no pumping and no water is supplied, this is the first sign of such a malfunction. In this case, it is first necessary to check the filter of the device, since if it is clogged, then the liquid can not be removed. If the cleaning does not bring the result, you need to contact the service center.

Replacement of this unit can be quite expensive, therefore, care should be taken when handling the product. It is necessary to periodically clean the filter and install a drain hose at the level recommended by the instruction.

Defective programmer

Modern household appliances for this purpose are equipped with fairly sophisticated electronics that control the entire process. Therefore, if it fails or it breaks down, then just the washing machine does not gain water. What to do in such cases, usually indicated in the operating instructions for a particular model. However, there are also simple actions that can be performed independently:

  • First of all, a breakdown of this type is displayed on the display panel of the device. It may look like an error, an incorrect label or a complete absence of an indication. This is how the defect is determined.
  • Next, disconnect the device from the mains and leave in this position for 10-15 minutes. After that, the inclusion is made.
  • If after such actions the machine did not work, then it is recommended to call the master. It is rather difficult to repair such a mechanism on its own, especially if there is no special tool, there is no appropriate education and spare parts.

Problems in the pressure sensor

This unit is designed to monitor the supply of water to the machine. It is he who is responsible for the amount of liquid in accordance with the weight of the laundry. Therefore, if there is a breakdown in it, the water simply will not enter the device. The replacement of this part is carried out with the help of specialists of the service center, where it is almost always available.

It is better not to carry out such repair yourself. The matter is that in some models it is necessary to make the subsequent adjustment or updating, and for this purpose it is necessary to have the corresponding equipment.

Recommendations of specialists

  • If the washing machine picks up water and immediately drains it, then it's worth paying attention to the washing mode, which is set on the programmer. Quite often housewives simply forget that they have chosen a certain way of accomplishing the task, which presupposes this behavior. That's why experts recommend checking at the optimal mode.
  • If the product is under warranty, then you should not disassemble it yourself and replace certain parts. The call of a qualified specialist will take some time, but will save a considerable amount.
  • Sometimes the operating instructions describe in detail the sequence of actions when a certain fault is detected. All instructions should be performed clearly and in the order given, as they are written for a specific model, taking into account its technical features and test tests.
  • If the hose of the device is disconnected from the water supply system, it is necessary to shut off the supply of liquid in this section or completely in the network.
  • On some models, the operation of the intake valve is checked by switching the machine on. If this node is functional, a characteristic click must be heard, caused by the temporary opening of the valve.

Conclusion

If the washing machine does not pick up water, then there may be a lot of reasons for this behavior. That's why, before you contact specialists, you need to completely eliminate the influence of the human factor, so as not to spend money on repairs and do not look stupid before the master, who discovered that you just blocked the intake valve. In this case, most of the failures associated with such a violation in the work, you can eliminate yourself without having to dismantle the machine.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.unansea.com. Theme powered by WordPress.