Which self-leveling floor is better: overview, features and reviews

If you are faced with the question of what kind of self-leveling filler floor is better, then you should understand its varieties. For the arrangement of such systems, finely dispersed mixtures are used, which can form the basis for finishing finishing or become a rough draft for further work.

Composition

This type of product has another name - liquid linoleum, but the surface obtained has no joints, representing a natural monolith. The market offers a wide range of appropriate mixtures, each of which is distinguished by a certain composition. As the main fillers are: gypsum, cement, as well as polymers. Among other things, among the ingredients you can find special additives that affect the strengthening of certain properties of the mass. To add color to the composition, pigments are added.

Overview of dedusting floors

Quite often, before the repair work, home masters think about what kind of self-leveling filler floor is better to choose. To this end, in some cases a dust-free composition is used, which is used to prepare the basis for further finishing with other materials. Among the advantages, it should be noted that the mass plays the role of a primer, strengthening the structure of the surface. Laying these compounds is simple enough, and the pouring is done in a thin layer, which eliminates the reduction in the height of the ceilings. However, there are certain disadvantages of dedusting formulations, one of which is that the surface will serve approximately 3 years.

Features of polymer floors

If you are faced with the task of what kind of self-leveling filler floor is better to buy, then you can pay attention to polymer compounds, which can be based on polyurethanes and methyl methacrylates. Their advantages are high strength, increased wear resistance, water resistance, the ability to undergo critical temperatures and their differences, high elasticity, long service life and reliable sound insulation.

Polymer floors are used in those rooms where they will undergo in the process of operation shocks, vibration and increased loads. Among other things, after completing the work surface will find an attractive appearance. But, according to buyers, such surfaces have certain drawbacks. For example, mixtures have a higher cost compared to other varieties, and are also demanding for the moisture of the substrate. Before starting work, the foundation must be carefully prepared.

More about methyl methacrylate self-leveling floors

If you are faced with the question of what kind of filler floor is better, a comparative review is recommended to read. It is presented in this article. Among the huge variety of liquid floors, it is especially worth mentioning methyl methacrylate compounds, which are often compared with polyurethane analogues. The latter variety is less wear-resistant, but if you make comparisons with the epoxy base, methyl methacrylate is more chemically resistant.

It is noteworthy that in the process of operation, cracks will not appear on the surface, even if heavy equipment is used. When experts think about which self-leveling filler floor is better (a review of the most popular filler is presented in the article), they are often advised to purchase exactly methyl methacrylate mixtures that dry quickly, which allows not to stop the production process. Cures the surface for an hour, and the final strength is gained in 2 hours. But you should take into account the fact that the solidification of the liquid composition is accompanied by a rather sharp smell, which is not very pleasant, but it is solved by qualitative ventilation.

Features of epoxy floors

If you still do not know which self-leveling filler floor is best to purchase for repair, you can pay attention to the epoxy composition, which is excellent spreading during laying, and also shows neutrality to most chemical compounds. Among the latter can be identified and aggressive.

Experts argue that epoxy mixtures are excellent for flooring in a garage. But you must be prepared for the low mechanical strength of the already hardened mass, as well as increased surface abrasion. When falling massive objects on the floor may appear cracks, but if you shed something on it, it will become slippery, which is not always convenient and safe to operate. Most of all, epoxy mixtures are suitable for utility rooms.

Characteristics of gypsum floors

If you choose a self-leveling floor, which is better, you should definitely discuss it with a specialist even before the work starts. In the sale can be found and gypsum cement mixtures, which have many advantages. The formulations make it possible to form a surface that is not too demanding for the alignment of the substrate, dries quickly after laying, and also exhibits minimal shrinkage. For the reason that such floors are characterized by good thermal conductivity, they can be used as a basis for a warm floor system. But if you need a self-leveling self-leveling floor, which is better, it is recommended that you decide before you go shopping. Thus, gypsum bases must be laid on completely dry surfaces. In addition, they assume the installation of expansion joints, as the coating is subjected to deformation, as well as expansion.

Reviews of cement self-leveling floors

If you want to equip the self-leveling floor, which is better, customer feedback will be understood. Cement floors have acrylic additives in the composition and possess high strength and high adhesion. According to buyers, such compounds are excellent in the role of screeds, and their laying can be carried out almost on any surface. Masters note that shrinkage is minimal, and pouring can be done even on a wet surface. During the operation, the floor is not covered with cracks, and also differs frost resistance. According to users, cement flooring can be laid at any temperature, and it is permissible to do this both outside and inside the premises.

Cement self-leveling floors are self-leveling, reviews about which, as a rule, are positive, are chosen by consumers also for the reason that they quickly harden, the floors can be used for movement a few hours after the completion of the installation. But the cement bases have also disadvantages, which consist in a sufficiently long set of strength, as well as a large expense.

Specialists claim that such floors in the process of operation will absorb moisture in one way or another, depending on the additives. The appearance is most often dull, gray and unattractive, but if you want to equip such floors and use them as a finishing coat, you will have to purchase a composition with pigments that is much more expensive. As practice shows, the final strength of the coating is obtained after 4 weeks. But the big expense is caused by that the layer should be equal about 5 millimeters.

Characteristics of the bulk floor "Starateli"

If you want to apply a self-leveling floor in the repair process, a review of the best is recommended. Among them will necessarily be products of the brand "Starateli", which is presented for sale in a wide range. One of the varieties is a thick floor, which is equipped with a layer from 30 to 80 millimeters. After 28 days, the surface will reach a strength of 20 MPa.

To prepare the prepared mixture it is necessary for 40 minutes, and the charge of a dry mix on 1 square meter will be equivalent to 16 kgs at one centimeter of a layer. If you buy a solution in a 25 kg package, then it will take about 6 liters of water. Surface operation will be possible 2 days after the application of the mixture.

Eunice floor

If you are in search of an answer to the question about what kind of self-leveling mixture to choose for a laminate, then we recommend that you pay attention to the liquid floors of "Yunis", which are quite common in the Russian market. Variety "Horizon-2" acts as the final cover during the repair, but is used as an independent mixture of the rough surface before the finishing of the finishing material by the type of parquet, tile or decorative laminate. The appearance of the floor is quite attractive, the mixture makes it possible to get a smooth and smooth surface of the decorative coating. With the help of this mixture, it is possible to straighten smoothly the unevenness of cement-sand screed. Among the additional advantages: moisture resistance and resistance to low temperatures.