What is the difference between xenon and bixenone? What is better - bixenone or xenon?

In conditions of reduced visibility, and especially at night, any vehicle becomes a means of increased danger, since at that time the probability of emergencies increases significantly. To prevent this, many drivers use different means. The most popular of these are gas discharge lamps. They are devices based on the use of inert gas. Such lamps are usually divided into two types - xenon and bi-xenon. In this article, we will talk about how xenon differs from bixenone. It should be noted that both one and the other device allows to improve visibility several times.

Such technologies are now used in the standard equipment of many executive cars. Lamps biksenon and xenon (the difference between them is described below) provide very high-quality lighting of the route. The usual halogen lamps in this indicator lag very much. Another advantage of gas-discharge lamps is that despite their brightness, they do not dazzle the eyes of car drivers moving in the opposite direction.

The concept of xenon

Xenon functions at the expense of inert gas. From ordinary automobile headlights, these lighting devices are distinguished by the absence of filament. The main principle of xenon operation is based on the fact that a high voltage occurs between a pair of electrodes. It is this that makes the gas with which the lamp is filled to glow. At the output, radiation is formed, it is constant and does not change its direction. Xenon headlights are quite economic, because the minimum period of their use is about two years. As for the necessary voltage pulse for the device, it is created by the ignition unit. Compared to standard lamps, the cost of xenon is higher, but this price can be called justified, because the device increases traffic safety.

The concept of bi-xenon

The first thing that xenon differs from bixenone is its time of appearance. The fact is that biksenon as a type of gas-discharge lamps was invented a little later. It incorporates a mechanism, the purpose of which is to change the direction of light radiation. This device is a metal curtain (it is also called a "floating bulb"), the movement of which is due to the action of the magnet. This allows you to open different zones of action. The switching itself is carried out by cutting off part of the light flux. As of today, in the list of the best lighting devices, the leading indicators belong to this kind of lamps.

Problem of choice

When operating a car, the safety of the driver and his passengers is of paramount importance, no doubt. Motorists often improve certain parts of the car, including lighting. In this regard, many of them are wondering about what is best: bixenone or xenon? Most experts recommend choosing a more modern first option. At the same time, it should be noted that the installation of xenon headlamps will also provide much better lighting compared to filament lamps.

Brightness, reliability and economy

Principal in lamps, such as xenon and bi-xenon, the difference, as already mentioned, is the organization of focusing. On such parameters as economy, reliability and degree of brightness of light, they are the same. In the case when the car is not equipped with separating optics, it is better to give preference to bi-xenon, which can be installed even independently, without certain skills. In this case, it is important to simply study the instruction well. With regard to the choice of goods, then attention should be paid to the designation of the socle.

Middle and high beam

The key for such types of lamps as xenon and bixenone, the difference lies in the use of lighting modes. The fact is that the first type is only used to produce a passing beam. As for bi-xenon gas discharge lamps, the technology used for them makes it possible to change their focal state, in other words - to switch the dipped beam to the far beam, and vice versa.

Cost

Far from the last role in the selection is the difference between xenon and bi-xenon in monetary terms. The minimum cost of a set of the first type of gas-discharge lamps, taking into account the installation, will be about 1900 rubles, for the very simple set of the second type it will be necessary to shell out about 3000 rubles.

The most common combination

The most popular among drivers who are well versed in what differs from xenon from bi-xenon, now uses a combination when the main beam uses halogen lamps, and for the near-light - xenon. The explanation for this is very simple. The fact is that very bright driving light is usually required only for long trips outside of cities. As the statistics show, the majority of drivers about 90 percent of trips are carried out for not very long distances, usually in the features of settlements.

conclusions

Knowing how xenon differs from bixenone, it is quite easy to make a choice in favor of one or the other. Both types of headlights are sold in almost all auto shops and allow to significantly improve the safety of driving. The main thing to remember is that these headlights are a source of high voltage, so you should not allow the car to operate if there is a malfunction, you should immediately call the service center. Otherwise, the probability of fire of the device increases.

In summary, it should be noted that the principle of operation of xenon and bi-xenon headlamps is identical. Standard lamps of the first type can function in the mode of both the passing beam and the driving beam. In the second type, this possibility is combined in one headlight, in other words, the bi-xenon switches due to the correction of the direction of the light flux. Therefore, many experts give preference to him. Along with this, both technologies are modern, and most motorists make their choice based on their budget, car equipment and personal preferences.