Thicknesser with own hands. Thicknessing machine plan

Woodworking machines (thicknessers) are well suited for cutting workpieces of various sizes. Longitudinal sections can be carried out by means of a movable bed. The frames of the models are made in various shapes, and can vary considerably in performance.

Also note that some modifications are made with gearboxes. In this situation, the user has the ability to control the cutting speed. In order to study this issue in more detail, it is necessary to familiarize yourself with the device of a simple thicknessing machine, which you can do yourself.

Thicknessing machine

The plan of the thicknessing machine includes a U-shaped frame. In this case, the frame is most often used two-sided. In this case, much depends on the work area. Some modifications involve moving platforms. In this situation, the frame has the ability to move on rollers. Direct sawing of wood is carried out with the help of a powerful engine. For today, two-stroke modifications are most often encountered.

As a support in this case stands the bed. Also, the thicknessing machine plan includes a shaft, which is most often attached to the bowl and fixed on a special beam. To adjust the position of the frame, as a rule, gears are used. Also in the devices are installed flywheels for changing the position of the pushers. The side supports are generally fixed to the lower beam.

Speed Lock Device

You can make the thicknessing machine with the handles of your hands quite simply. First of all, it is necessary to prepare the lower frame. It is best for this purpose to pick up steel sheets in advance. In this case, much depends on the size of the frame. If its length does not exceed 120 cm, then the frame can be made narrow. Some advise additionally to install a support in the lower part of the machine.

Thus, the device will be well stabilized and the shaking will completely disappear. For accurate woodworking, the lower supports fit well. After the sheets of the frame are welded, you can proceed to the frame. The engine is most often located at the top. The retainer is usually mounted directly in the gearbox. In order for the platform to be controlled, it is necessary to calculate the height of the upper beam in advance.

Model with block stopper

With the block stopper, the thicknessing machine with your own hands can be done with the help of a low-power power unit. First of all, the assembly of the machine must begin with the installation of the frame. Next, a zone for engine mounting is prepared. Direct cutting elements are installed on the beam.

Modifications with crankshafts involve the use of different brackets. In this case, the adjustment of the platform is by means of flywheels. In order to locate the blocker correctly for the engine, the beam must be prepared in advance for large dimensions. Last but not least, it will only be necessary to connect the power supply unit with the power cable.

Model with three regulators

To do with three regulators, the thicknessing machine with your own hands can only be done by installing brackets. However, first of all, it is necessary to fix the frame on the frame. For this purpose, you can use a welding machine. In order for the platform to be stable, it is necessary to weld the lower retainers onto the beam. If the length of the bed does not exceed 120 cm, then the supports can be used small. Fixators for the platform are installed if desired. The height adjuster in this case must be located on the motor side. To do this, the bracket is installed near the upper beam.

With pushers, he should not touch. After that, the flywheel directly joins. The crankshaft must be located above the platform. Its diameter must be at least 18 mm. In some cases, experts advise him to install small fences. Protection at the machine is located above the bed. The motor must be directly near the platform. The regulator of longitudinal movement is also mounted with the help of a bracket. As a result, it remains only to secure the rotary regulator. The flywheel in this case is installed on the motor side.

Devices for two regulators

Make two regulators thicknesser machine with their own hands does not represent any complexity. The frame in this case can be set to a small size. First of all, it is necessary to deal with the altitude regulator. To do this, the bracket is welded to the working area. Its second end should be located on the upper beam. By rotating the flywheel, the platform must move. In this case, the main load is on the bracket. In some situations, the frame may also suffer from deformation.

In this case, many experts advise to install supports at the edge of the platform. This can be done with a welding machine. The second regulator in the thicknessing machine is designed for horizontal adjustment of the platform. In this case, you can not rotate it. Install the second bracket on the engine side. In this case, it is best to fix the flywheel at the upper beam for convenience.

Model with emphasis on the block

You can assemble the machine with the support of the machine with your own hands only with the help of a welding machine. Begin work should be from the frame. To do this, sheets must be prepared steel. Further it is important to weld the side supports. Only after that there is an opportunity to put the frame. In the corners it is best to imprison. This is necessary to ensure that the platform does not cling further. After that, the beam on the top block is installed. The engine in this case is attached last.

The presence of pushers at the machine will greatly facilitate the use of the device. Also note that the power supply unit is important at the bottom. For this, the platform can be placed under the bed. In this case, the crankshaft must be fastened under the engine. In this case, the cutting device is installed after the power supply unit.

Machine on a feeding tape

They are assembled with the feeding belt with their own hands using long shafts. In this case, its movement is provided by the displacement of the rollers. Collect the machine from the bottom. For this, the frame is first welded. Cast iron in this case can be used. The minimum metal thickness should be 3.2 mm. The frame on the machine must be attached to the side supports. To do this, you need to use a welding inverter. The edges of the platform are important to grind the file in advance. Rollers in this case must be installed under the working area.

For this, first of all, blocks are mounted under them. After that, you can make measurements under the upper beam. In this case, much depends on the dimensions of the engine. If we consider push-pull modifications, they will not occupy much space. In order to adjust the position of the platform, it is important to provide a place for the bracket in advance. Install it on the side of the cutting part.

Machine "Makita" МР2000

This machine thicknessing reviews has positive. By design, it is unique, and making it yourself is quite difficult. There are three regulators in this case. Due to this, the user has the opportunity to turn the platform. In addition, it should be borne in mind that the frame is used in small dimensions. Weigh this weighing machine (household) only 55 kg, and due to this it is very easy to transport. In this case, the work area allows you to process large workpieces.

Longitudinal sawing of wood is carried out by means of lateral pushers. The launch padlock is available for this model. Also from the design features should be noted the presence of a fairly wide frame. Due to this, with the stabilization of the specified device, everything is in order. It is worth this thicknessing machine (market price) about 650 thousand rubles.

Machine "Metabo" 30R

The construction of this two-side thicknessing machine is very interesting. In this case, the frame is U-shaped. In addition, it should be noted that the longitudinal regulator is located at the top of the beam. Thus, monitoring the platform is quite simple. With large workpieces this machine handles successfully. However, it should be borne in mind that this device is not suitable for longitudinal sawing of wood.

The shown thicknessing machine (household) is quite wide. The height adjuster is installed at the top of the beam. The working area is extensive, but there is no way to rotate the platform 360 degrees. The motor in this device is used at a power level of 3 kW. So, the performance is not bad. It is worth this thicknessing machine (market price) about 570 thousand rubles.

Two shaft model

To make a model with two shafts (the drawings of the thicknessing machine are shown below) is quite problematic. In terms of size, the device will be quite large. Also it should be taken into account that the frame needs to be prepared firmly. The minimum thickness of the metal in the lower part is 3.3 mm. It is also important to mention that the frame must be T-shaped. Many experts choose a platform for such a machine rectangular. In this case, the working area will allow for longitudinal sawing of wood.

Regulators for the design must be installed two. Brackets for a height controller are better to be mounted near the upper beam. In turn, the rotation controller is normally located at the bed. The bracket can be fixed at the support. The crankshaft in this case should be located directly at the upper beam. Mount it behind the cutting device. The second shaft that comes from the gearbox must be on the engine side.

Machine with jointer beam

With the planer beam, the thicknessing machine (homemade) is assembled at the first stage as standard from the frame. In this case, the frame is better to install the T-shaped. The minimum thickness of the metal should be equal to 3.3 mm. The upper beam in this situation must be welded using a welding inverter. The engine can be installed on a separate platform.

Also provide space for the power supply. The brackets for platform control can be installed two. The joint beam must be located at the base of the working area. Thus, it will not interfere with the preparation in the future. To fix the platform, you can use screws. In this case, the side supports in this situation will not be superfluous.

Model with honed beam

The thicknessing machine (homemade) with sharpened beams in our time is very common. For longitudinal sawing wood it fits well. It should also be taken into account that the working area in this case needs to be made wide. For this, it is important to build a U-shaped frame. Further to it it is necessary to weld a frame with supports.

The pushers are installed last. In this situation, you need to calculate the size of the brackets. To adjust the platform, flywheels will also be needed. The motor for the machine can be arranged as standard on the upper beam. In this case, power supply experts advise installing under the bed. Thus, the wiring during the operation of the device will not interfere.

Devices with a blocker

Machines with blockers can be found quite often. They are installed on one-stroke and two-stroke models. The device for blocking is located directly at the power unit. Also it should be noted that for them it is necessary to display the button to the control panel. At the same time, it is important to isolate the wiring reliably. If the power supply is located below the platform, then it is quite simple.