The weight of the cast-iron bath is 170x70 and 150x70 cm of Soviet production

Until a certain time, cast iron plumbing had no competitors. After all, this material has high strength and reliability. The only thing that can confuse the buyer is the weight of the cast-iron bath.

Before buying, you need to consider some parameters. For example, the shape and dimensions of the product. However, the main factor that influences the choice is weight. After all, the convenience of transportation and installation depends on it.

During the Soviet era, a cast-iron bath was very popular. Typical dimensions of the product in that period were 150x70 cm and 170x70. The weight of the Soviet cast-iron bath was their main disadvantage. At the moment, this indicator is much smaller, which is due to modern manufacturing technology.

Classification

Consider the classification of Soviet cast-iron products based on the values of width and length.

The model 140x70 cm is most often installed in small rooms. The maximum weight of such a bath is 80 kilograms, and the capacity is 150 liters. However, this option is not suitable for an adult who wants to enjoy lying in warm water. After all, you can only take a sitting position.

The following model is suitable for a standard room. The weight of the cast-iron bath 150x70 is 95 kilograms.

Products with dimensions of 160x70 cm are rare. It is enough to collect about 170 water to take a bath. In this case, the mass is 100 kilograms.

A more modern bathroom layout requires the installation of an elongated structure. That's why the product with dimensions of 170x70 cm is ideal for such a room. And what is the weight of an iron bath 170 cm? This parameter is 119 kilograms, and the capacity is up to 180 liters.

By individual order often produce large-sized baths. The size of this design is 200x70 cm. This model is suitable only for large areas.

If you compare Soviet baths with modern products, then their mass has become significantly smaller. For example, the weight of a cast-iron bath of 150 cm of domestic production is 20 kilograms more than that of a modern model. However, weight reduction is most often associated with savings on materials. This leads to a decrease in heat capacity and strength.

Modifications

There are several major modifications of Soviet fonts. For example, angular structures are produced only in large enterprises. After the manufacture requires additional capacity.

On special legs often make oval fonts. Such models do not adhere to the wall.

The standard option is a rectangular bathroom with typical dimensions. It has rounded corners inside the bowl and high stability.

Features

Soviet products, in addition to dimensions, have additional features. In particular coating. After all, the quality of enamel influences the duration of operation and appearance during this period. The standard thickness of the enamel coating is one millimeter. In addition, the inside of the product is absolutely smooth, without cracks or chips.

A robust design has a regular geometric shape. Also, there are no uneven edges, corners and bends. Safe operation is provided by the installation of special armrests and handles. In addition, additional treatment of the bath with a special solution prevents corrosion.

The choice of color is rather modest. Only now there are technologies that make it possible to realize any idea. In the Soviet period, the white model was the most common option.

Which material is better?

In Soviet times, the demand for the production of baths was cast iron. But now they are made from different raw materials. In addition to cast iron, use steel and acrylic. Each option has negative and positive sides. For example, steel is sufficiently plastic material, which makes it possible to make a bath of any configuration. The surface of cast iron is often porous, which leads to accumulation of dirt and rust. This drawback is absent in steel models.

The weight of the cast-iron bath is much larger than the steel, so it can be installed alone. However, due to the small mass, the structure is unstable and needs support. As the last most often the wall acts. Unlike a bath of cast iron, this model quickly heats up and cools.

Acrylic font is made of plastic synthetic material. Such raw materials are absolutely safe and hygienic. However, acrylic construction is often not sufficiently rigid. This indicator is regulated by the number of reinforcing layers. Therefore, for an even distribution of loads, the bottom and sides of the bath are further intensified.

The advantage of this model is the ability to keep the temperature for a long time. For example, a bath of cast iron after a lapse of five minutes cooled to one degree. While in the acrylic bathroom such changes occur only after half an hour.

At the same time the font from acryle is easy to damage. Specialists do not recommend the use of various chemicals for cleaning the product. It is better to give preference to special tools that are designed specifically for such surfaces. By the way, small defects can be eliminated by polishing. Tools for this procedure are sold in construction stores.

Manufacturers

Relatively recently, specialized departments could not surprise with a wide range. At that time, there were two manufacturers. And domestic and foreign manufacturers differed not only in value.

The weight of a 170-cm cast-iron bath exceeds the foreign equivalent of almost twenty-five kilograms. However, this is not a significant disadvantage. After all, this difference is due to a decrease in quality and thermal conductivity.

In addition, the depth of imported models is only thirty-five centimeters. This is often not enough for the average person.

Domestic products have great strength, but the choice of the shape of the bath is small. It's a foreign matter. A variety of design solutions, additional accessories and coatings is amazing and greatly increases the cost of the design.

Advantages

Soviet cast-iron baths have a number of advantages. In particular, it is easy enough to take care of a font. In this case, the coating retains its original appearance for a long time. It is permissible to use household chemical products and temperature differences.

Manufacturers always give a long guarantee for such a bath. It can be used for 25 years. The considerable weight of the cast iron bathtub 170x70 makes it possible to eliminate most of the vibrations. For humans, they are almost invisible, but have a negative effect on the seals of joints.

disadvantages

The large mass of the structure is its main disadvantage. For example, the weight of a cast-iron bath 150x70 can be more than 100 kilograms. This creates certain difficulties in transportation. Therefore, it is necessary to use the services of several assistants, which leads to additional expenses.

The disadvantages of such a product include an inadequate variety of forms. Cast iron fonts are made rectangular or oval. This is due to the laborious process of casting. Relatively recently, there were designs that have an angular configuration. However, the cost of this option is quite high.

Installation

Installation should start with placing the bath in the room. It must be turned in advance in order to fix the details of the legs. To do this, you need brackets and a set of tools. Next, the siphon and drain system are installed. In this case, the structure should be located under a certain slope to the drain hole. Adjust its position with the help of a supporting part and a building level.

The contact area of the structure and the wall should be treated with a special protective compound. This should be done to ensure the integrity of joints. Do not forget about the installation of the water gate mechanism. Then you can proceed to fix the discharge pipe.

In addition, it is necessary to provide grounding. Iron is the conductor of electricity. Before using the bath it is better to fill the bath with several liters of cold water. Only after that you can fully enjoy the water procedures.

Conclusion

For some, the weight of a cast iron bathtub 170x70 can be an advantage, for someone a serious drawback. It all depends on the preferences and wishes of the users. Therefore, it is worthwhile to think in advance about some details, because the bath is most often used for more than a dozen years.