The TV does not turn on, the bulb does not light - what should I do?

As soon as the television became widespread enough, people at once ceased to spend family leisure for taking walks in the open air. As a rule, everyone is sent for relaxation to the screen. However, what should I do if the TV does not turn on, does the lamp turn off or blink? If a new LCD-device or any other rather expensive variant of technology fails, it is obviously necessary to contact the service center. And also you can at your own risk and try to eliminate the problem yourself. Just how to deal with the problems, this article will be devoted.

What should I do first?

First you need to inspect the equipment. The manual describes the solutions of some basic and non-technical failures. For example, the problem of an incompatible TV may well be that the operating mode was incorrectly connected or selected, the power button was accidentally pressed or broken. In addition, it can not be ruled out that the power supply could burn.

Before you look for solutions to solve problems, if the TV does not turn on, the light does not light, you need to determine what kind of device is purchased. There are liquid crystal, plasma and kinescope. In the case of minor malfunctions, in principle, there will be no special differences in repair, the difference is only in the "design" of the internal design of the device.

Types of malfunctions

Televisions can have different problems that cause approximately the same "symptoms". In this case, the devices need a quick fix.

• The indicator flashes red.
• The TV clicks, hums, hisses or whistles.
• The indicator does not work at all.
• The TV does not turn on, the light is on.

What to do in each specific situation, you can learn from this article. But it must be remembered that, as a rule, the same characteristic of a broken device will be either a lack of response to the console, or a complete shutdown with the power supply on.

Basic indicators of breakage

Before you start looking for a malfunction, you must try again to turn on the TV. It is possible that the problem in the power button, which for some reason stopped working stably. The indicator can either be on or off, so you should also pay attention to it. In the first case, the problem is not exactly food.

Often consumers face such a problem: Toshiba TV does not turn on, the light is on, there is no damage. So what's the problem? Let us consider later in the article. It is necessary to pay attention to the fact that it does not matter from which producer the broken TV: the solution to the problem will be the same. However, consumers who prefer Toshiba, Samsung, LG, Philips, unfortunately, face such problems quite often.

What can be the problem with the indicator turned on?

In the event that the indicator does not want to respond to the console, it is worth trying to turn on the TV thanks to the control button (relevant for those who do not get out of pause mode). It may be that the remote is broken.

So, if the control button does not help turn the device on, you need to pay attention to how the indicator behaves. What happened if it glows green? As a rule, this is the problem that accompanies those owners who noticed that the Samsung TV does not turn on. The light is green when the unit is in sleep mode.

Sometimes the problem lies in the disabled function "Network". It should be included always. Otherwise, the TV will not work and will stop responding to the remote.

The flashing and off indicator indicates other problems. They are described below.

The indicator does not light and the TV does not turn on.

If the indicator does not light, and the TV itself does not show signs of life, it is often a problem - in a broken power supply unit or lack of electricity. If the bulb just burned out, then the device would work without any problems. Before you panic and communicate with your master, you can try to find out the cause yourself and eliminate it.

Do not immediately call expensive specialists, if not turned on TV "Samsung". Is the light on? No? Read the tips below.

The most common options for breakdowns

One of the trivial problems is the breakdown in the outlet or the lack of electricity. Here it is necessary to search for the resolution of a malfunction in the flap or in the socket for the network. Sometimes the reason is a complete lack of electricity. As a rule, in this case, the whole house is de-energized. Check that the outlet, you can use a special screwdriver or tester. If there is no power, then you need to go to the machine inspection. To ensure the best result of the test, you need to click a plug several times. If it does not help, you should call an electrician.

If the television is of a kinescope type, a frequent fuse may be a blown fuse. It is because of it that food is no longer served. In the event that the part in the device is located in an easily accessible place, then you can replace it yourself, without extra costs for a specialist.

The Philips TV does not turn on. Is the light on? If not, then there is a possibility that the consumer incorrectly chose the active mode. Many modern devices have special functions that allow it to enter the "sleeping" state. In this case, the TV will respond to the remote. It is enough to go into the menu and select the "TV" mode.

If the TV is connected via an extension cord, then it's worth checking its functionality. In the case when the device is turned on in direct operation with the socket, the problem is precisely in the "intermediary". It is quite obvious how this malfunction is solved - a new or repaired extension cable.

The TV may not turn on if any parts are broken. It's about both chips and capacitors, and about the power supply, buttons. It is best in this case not to try to solve the problem yourself, because incorrect actions can lead to more problems.

Other types of breakdowns

Quite often, the owners notice that the TV does not turn on, the bulb does not light, and strange sizzles and cracks are heard from the speakers. Devices of different firms can, having the same problem, submit a completely different "symptomatology".

What do you need to pay attention to?

• The TV does not turn on.
• The indicator flashes, or it has completely ceased to burn.
• From the speakers comes a hiss, whistles or clicks.

The most common reasons for this behavior of technology

• The heating of either the cabinet or the internal parts of the TV is the most common problem for plastic elements. In this scenario, the non-inclusion of the device, the absence of indicator glow and clicks will also be characteristic for the serviceable model. To eliminate the problem, it is enough to let the technician rest at least an hour.
• The TV does not turn on, the bulb does not light - such nuances are typical for the device's protection. As a rule, if the power supply unit or other basic parts breaks, the TV switches to a special mode. This avoids the most serious problem, which will result from a minor malfunction. In this case, it is unlikely that the device will give signs of life. To fix the problem and switch to the operating mode, it is necessary to repair the main problem.
• The TV will whistle and the indicator will not light up if the power supply is too heavy. The problem can be solved by replacing a transformer, a microchip or a transistor, as a rule, they cause such a malfunction.

Supra TV does not work

If the TV TM "Supra" suddenly clicked when turned on, and the indicator ceased to burn (or started to flash), then do not be scared at once. Such a problem for the models of this manufacturer - a normal phenomenon. It often happens that the "Supra" TV does not turn on, the light is on, it is off or it is flashing.

The first thing to do is replace the electrolytes in the chip. As a rule, this action helps to solve the problem that has happened. If such actions were not effective, and the above methods also failed to provide the required result, you will have to carry the device to a service center.

Approximately the same must be done if the LG TV does not turn on. A light bulb burns or not - this is an insignificant question. Often the devices of this manufacturer are broken due to problems with the microcircuits.