The technology of applying gel-varnish is simple

Without manicure, as without proper accessories, it is difficult to create a truly worthy and finished image. Modern technology for coating the nails can prolong the beauty of manicure (for up to 4 weeks). This is not fiction. Gel-lacquer is an innovative solution that allows you not to resort to build-up. The technology of applying gel-lacquer is quite simple, but requires compliance with certain rules.

Preparation

Naturally, you first need to do a manicure. This is the first rule. What type of manicure to choose? It's up to you to decide. It can be a hardware manicure, edging or European. The technology of application of gel-varnish implies the absence of any cream on the hands, and not only at the time of laying the material, but on this day in general. After the manicure is done, you can proceed to the next step. This is the degreasing of the nail plate. This can be done either with a special remedy or with simple alcohol. It is very important not to touch the nails after this.

Procedure

Nail files need to be made during the manicure. If you neglected this, then remove the length and shape before you have degreased the plates. The dust that forms is to be cleaned very carefully. If this is not done, then there is a risk that the material will exfoliate, unevenly lie down, be pruned and flaky. When all the manipulations are done, you can start the procedure itself. The technology of application of gel-varnish obliges to observe all these steps:

• First apply the base under the gel-lacquer;
• Dry it in a UV-lamp or LED-lamp as much as indicated in the instructions on the bottle;
• Then apply a thin layer of colored gel-varnish (brush on the edge of the vial carefully squeezed);
• Dry the layer in the lamp as much as the instruction requires;
• If necessary, apply a second layer of colored gel-varnish;
• Dried as much as the first layer;
• Then finish the finish or fixer (on the bottle indicated: TOP COAT);
• Dry it, according to the instructions on the vial.

It is noteworthy that the material of different firms has a different consistency: from very thick to very liquid. It is important to ensure that the gel-lacquer does not flow into the cuticle or side rollers. If this happens, you need to remove the excess cotton swab dipped in the liquid to remove the varnish, and carefully, so as not to smear all the gel-lacquer. The technology of application also implies a certain order:

• First four fingers on one hand (except for the big one, if the right-hander, then on the right);
• Then four fingers of the other hand;
• Then on the thumbs of both hands.

This is due to convenience. So it's easier to dry your nails in a lamp. Even the simplest and the least powerful (at 9 watts, for example).

Abundance of options

Modern firms producing materials for nail masters offer a huge number of options. One of the best, but budgetary is the gel-lacquer Lidan. The technology of application does not differ from the described. The drying time in the lamp is 60 seconds. This is for a power of 36 watts. LED-lamp also allows you to dry each layer in 30 seconds. Depending on what type of equipment you use, the time may vary. The technology of applying gel-varnish is simple, does not require special skills. Any newcomer can do this, albeit not always the first time.