The cheaper to sew the house outside the old wooden and brick?

Country houses and cottages, as a rule, are built of wood, concrete or brick, which have insufficient resistance to environmental influences. As a result, new homes very quickly become old and unattractive. Therefore, in order to protect the structure from precipitation, wind and other weather conditions, the building is usually additionally trimmed with other building materials. And the first question that arises: the cheaper to decorate the house from the outside, not saving at the same time on the quality of the finish?

The basic building materials for a covering of the house

To date, there is a wide variety of different building materials that are applicable to the plating of buildings. And every year there is something new. Each of the building materials has its pros and cons, but mostly they are of good quality and durability. Therefore, one of the main consumer characteristics is the price of the product, and the question is, the cheaper it is to decorate a house from the outside, is of paramount importance when choosing a material.

For the maximum cost per square meter conditionally take 1000 rubles. That is quite affordable for most residents of our country. Of course, the definition of "cheap-expensive" for each his own. But provided that the cost of facing the structure of stone or brick costs at least 3000 rubles. For 1 square. M (material cost plus labor costs), the price is 1000 rubles. Seems quite acceptable.

Finishing the house with a lining, block house and other wood materials

Thanks to the fashion for naturalness and naturalness, houses made of sawn timber have become especially popular today. The excellent characteristics of this structure significantly spoil one serious drawback. Wood is susceptible to rapid destruction from environmental influences and requires mandatory protection. Therefore, it is not enough to erect a wooden house, it must be additionally protected.

There is another side to the question. Not every owner of a suburban area can afford to erect a new house or cottage in exchange for the old structure. Therefore it is necessary to bring in a worthy appearance that building which is already available. And immediately the question arises, how to sew an old wooden house outside cheap and extend the life of the building.

Strange as it sounds, but to protect a wooden house is better than lumber, that is, the same wood. Therefore, such materials as a block house (wooden siding under a log), lining and others are perfect as a covering for such structures. These saw-timbers are still processed by all necessary means to prevent decay and destruction of the tree.

At the same time, the cost of such materials is quite democratic, the block house of Ukrainian or Russian production can be purchased at a price of 350-700 rubles. For a square meter, a lining for external works - 400-1000 rubles. The cost of imported building materials, of course, is slightly higher.

It is worth considering and other options, the cheaper it is to sew a wooden house from the outside. And also other buildings made of bricks, concrete blocks and other building materials.

Facade thermopanels

Depending on the material from which the building was built, as well as the requirements for heat and sound insulation, as a rule, they choose what to coat the house from outside cheaply (the photo below shows this option).

If the structure of a tree holds well the heat, then the house of brick or concrete has very cold walls. Therefore, for its plating, it is preferable to choose materials with good thermal insulation. The optimum option in this case are thermo panels consisting of polyurethane and ceramics. To date, Russian manufacturers have quite well established the production of thermo panels, so the cost of this material is quite reasonable. If the cost of plating from foreign companies varies between 1600-2500 rubles. For 1 square. M, then the panel of domestic production can be purchased for 900-1300 rubles per square.

Fiber cement panels

For stone buildings, another option is better than to decorate a brick house from the outside cheaply, are fiber-cement panels. This is a relatively new material, the release of which has already been established by Russian manufacturers, and a great future is predicted for him. Excellent strength characteristics and ease of installation make this material particularly attractive. The cost of imported material is 1600-2000 rubles. For 1 square. M, while the domestic analogue can be purchased for 700-900 rubles, without losing quality.

Fibrocement panels have high strength, reliability and resistance to changeable weather conditions. The only drawback is their rather significant weight, so they are practically not used for finishing wooden or panel houses.

Vinyl or metal siding

Choosing next, the cheaper to sew the house outside. Also, a brick or concrete building is convenient and profitable to finish with siding. In addition, due to its light weight, this building material can also be used for plating a wooden structure.

Both types of siding have their advantages and disadvantages. Metal siding withstands a greater temperature gradient, is more durable and reliable, but strongly removes heat from the walls of the building. Vinyl material though does not heat, but does not cool.

At the same time, the cost of different species does not differ much: the price of metal siding is about 100-195 rubles, the vinyl type - 190-200 rubles. For running meter. However, when the large-sized building is clad, this relatively insignificant difference can result in a palpable amount.

Lining proflistom

Another option, the cheaper to decorate the house from the outside, is the corrugated board. More inexpensive material, perhaps, you will not think up. The price of this building material ranges from 160 rubles. Up to 350 rubles. Per meter depending on the region and brand of the sheet. It should be borne in mind that, as a rule, you choose a corrugated sheet with small ribs of stiffness. Of the disadvantages of this material is its poor thermal conductivity, which can be compensated for by additional thermal insulation. As well as siding, the corrugated board is fastened to the frame, and the plating process takes place much faster due to the larger area of the attached web. Mounting of corrugated board does not require special knowledge and skills, so you can decorate the house with this material alone, saving on attracting professional builders.

Both siding and corrugated board can be used for finishing houses made of timber or logs, as well as panel houses.

For today it, probably, the most widespread materials which can be got at the reasonable price. But thanks to the rapid development of the industry, who knows what will offer us the building materials market tomorrow?