Stabilizer bush polyurethane: application and feedback

The condition of the running gear of the car requires special attention, since it affects the quality of the traffic and the safety of the driver with the passengers. That's why you need timely troubleshooting and replacement of worn parts. Stabilizer is one of the main parts of the system. His work is influenced by the condition of the bushes. This part has small dimensions, but, despite this, makes the management of the vehicle more comfortable. It should also be noted that high-quality, non-worn sealing elements reduce the load on the chassis parts.

Varieties

Polyurethane bushings of the stabilizer of lateral stability have the greatest distribution, also assortment of shops is presented by spherical and rubber variants. In addition to the material of manufacture, they have different characteristics. Any of them, irrespective of the manufacturer and the quality of performance, are subject to wear, as they are heavily loaded during the operation of the car. Also noticeably affects the condition of roads. If this item is found to be defective, a mandatory replacement is required.

A damaged polyurethane stabilizer hub contributes to a change in the quality of the entire system and the rapid wear of parts, resulting in reduced safety of the vehicle. Therefore, you should not save on such a simple part, so as not to cause large expenses for maintenance and repair.

How to determine the need for replacement

To determine the malfunction, in some cases it is not necessary to resort to diagnostics, since, in addition to the change in controllability, characteristic sounds emanating from the suspension often arise. At the same time, the noise becomes more distinct at high speed. When driving along the road with pits and potholes there is a noticeable beating in the hanging part. In addition to noise, you can see a deterioration in the maneuverability of the vehicle.

Replacement of consumables must be carried out before their damage reaches a critical level. Timely maintenance, as is known, not only extends the life of the car, but also preserves its basic elements, the purchase of which costs a fairly large amount.

Advantages

Despite the fact that the repair work is not difficult, you need to know some features and pay special attention to the selection of new parts. Often the regular elements of car owners are changed to stabilizer bushings polyurethane or rubber. Polyurethane has many advantages that other materials can not boast of. Today it is the most reliable and modern option for seals. It increases the period of operation of both the elements themselves and the entire suspension system of the machine. Other advantages include the following:

• Less susceptibility to aggressive driving style;
• Preservation of the suspension geometry, which does not depend on ambient conditions and operation;
• Increases the comfort of driving due to the smooth movement of the car;
• During the entire period of use, complete control of the management is maintained;
• Different temperature regimes do not affect the elasticity of the material;
• Resistance to environmental negative factors.

The polyurethane stabilizer bushings reviews are usually positive, which is an additional reason for their purchase.

Required Tools

Having determined the unsuitability of the installed bushings after diagnostics of the car, it is necessary to worry about the quick replacement. Many workshops offer relevant services, but they are quite expensive. At the same time, each car owner is able to independently carry out all the work, even without special experience and knowledge.

The keys for 10, 13 and 24 are needed to remove the plastic protection, the bolts that hold the stabilizer, and the fixing elements of the subframe. Without a jack and clamps metal can not do with fixing the stabilizer. It will also need a polyurethane stabilizer bush, a 27-in. Head and a lever, in the role of which a steel pipe can protrude.

The work process is divided into several stages:

• Removal of fixing elements;
• Removal of damaged parts;
• Installation of new seals with preliminary cleaning of the seat.

Such an algorithm of action is possible even for those who have never had to repair a car. For self-replacement, you must first prepare all the tools and supplies.

How to choose

Polyurethane bushings of the stabilizer "Pivot point" are the best option for replacing the old element. They are more resistant to temperature changes, various environmental conditions and modern realities on the roads.

Many materials for making seals become less elastic when working in bad weather. The polyurethane stabilizer hub is suitable for both urban and auto vehicles used for out-of-town and extreme trips. Many people say that such elements require replacement much later, in comparison with regular ones.

Modern manufacturers offer an extensive range of spare parts of different quality and price category. The existing diversity in some cases can confuse motorists. The experience of others is an additional guide to making the right choice. Also, according to reviews, you can choose between several similar parts from different manufacturers.

Course of work

Despite the fact that replacing the polyurethane sleeves of the stabilizer "Lanos" in the car service will be quite expensive, the process itself is much easier than any other repair in this part of the machine.

It is worth noting the need to comply with safety regulations, in particular, the car should be tightly fixed on the jack.

First, you need to remove the wheels to ensure easy access to the protection, which is removed with a key for 10.

Dismantling can be simplified by lubricating all elements with a specialized composition. Further, unscrew using suitable keys for fixing the column and shock absorber, as well as the subframe bolt.

Between the subframe and the body part the lever is mounted. Now remove the old seal, and it replaces the polyurethane sleeve stabilizer front suspension. It must be placed on the installation site and secured with a clamp made of metal. To increase the fixing quality, it is first necessary to remove the gasket located between the car body and the subframe. The latter is bolted to the body part. Racks are mounted on the same place after all the works.

What you need to know

The fastening of the elements can be simplified by applying a graphite composition to the working plane.

Special attention should be paid to safety. Details and tools of high quality from proven manufacturers should be used, this will prevent the structural elements from changing and the likelihood of injury.

Reviews

VTR sealing elements, in the opinion of car owners, represent an optimal price-quality ratio, complete with lubricant supplies providing easy installation.

Bushing stabilizer polyurethane Febi, according to customers, relieved their cars of bored squeaks and sounds that became particularly noticeable in poor quality roads and the move "lying policemen, even if the plus temperatures.

Reviews for the Moog RE-SB-6849 parts are mostly positive, car owners did not notice any significant changes in the controls, but the noise does not appear even after two or three years of using the bushings.