Silicone mold for soap by hand

The use of handmade soaps is a concern for the health of loved ones: the cosmetic product does not contain harmful chemical impurities and ingredients of unknown origin. You can buy such a product at an exhibition of needlework, in an online store or cook yourself.

The composition of soap "from scratch" includes alkalis, work with which requires accuracy, accurate calculations and compliance with safety regulations, but the merit of the product is that there are no sulfates in the composition. Brew soap at home from the finished base, dyes and flavors - an activity that even a child can cope with. In shops for needlework, where there is everything to create a beautiful and practical gift, you can buy ingredients or different sets.

How to make soap a source of income

Soap making can turn from a hobby into a real profitable business, if you bring something unusual to make this cosmetic product. Such a highlight will be the original form, a special smell and additional coloring of the finished product with special paints.

Ordinary slabs of the classical form already surprise nobody. But figurines in the form of animals, fruits and various objects, in which it is difficult to recognize the usual means for skin cleansing, attract admiring glances and cause a desire to buy an interesting gizmo. To make such statuettes, you need special silicone molds for soap. They can be purchased at the store or made independently.

Pros and cons of using silicone molds

Silicone is convenient in that it is much easier and quicker to get the finished product out of it, and the molds occupy less space than plastic containers. Plastics sometimes have to be heated under a stream of hot water, which adversely affects the shape of the soap-shaped figure. The wet and curved cosmetic loses its appeal.

Cheap silicone molds for soap are not easy to find in stores for creativity, but even the most common ones will cost three times more expensive than plastic ones. As an alternative, soap-makers can purchase standard ice or baking molds, if they do not plan to create something unusual.

Form for soap with your own hands

Interesting figurines are obtained with the help of silicone molds for soap 3d, allowing to create detailed figures of different sizes. Their only drawback is a very high cost. Not every master is willing to spend a large amount on such a device. It is much more profitable to learn how to make silicone molds for soap 3D yourself, using different materials.

It will require a special super soft silicone two-component compound with high fluidity, intended for casting. It consists of a base and a hardener. An optional component is a dye for silicones, which will help to evenly mix the mixture. Master-model, on which a silicone mold for soap will be made, must be dry and clean.

Additional materials

Of the equipment will need electronic scales - accurate, and conventional kitchen. It is necessary to be convinced in advance in coincidence of their indications. To mix components it is convenient to use a large disposable glass, a measuring container or a mug with a handle.

Plastic containers are not too suitable for creating a silicone mold for soap, because they crumble. In them it is better to mix small portions of silicone, weighing up to 100 g, using for this purpose small plastic knives with cut edges.

The stick for stirring the liquid must be stiff and flat. You can make this tool yourself from a simple ruler with rounded edges. To mix the dye should be stocked with a long and thin wooden stick. Recruit catalyst can be a conventional Pasteur pipette.

To fill a silicone mold for soap, you need a solid surface, for example, a thick cardboard and several sheets of thick paper. Of these, formwork walls are created. Paper napkins or towels are more convenient to use in a roll, they will need a lot. Fix the model on a cardboard basis with an adhesive gun.

Preparation of ingredients

The components for mixing should be kept at room temperature for several hours. Read the manufacturer's instructions carefully. Silicone mold for soap can spoil stagnant material, so before work it should be kneaded for several minutes, slowly turning the container. When using a dye, it is better to prevent it with a wooden stick, so that the pigment does not settle down to the bottom.

Creating a silicone mold

The manufacture of a silicone mold consists of the following steps:

1. We glue the model to the base with an adhesive gun.
2. We make the formwork for pouring using cardboard or heavy paper: leave the gap between the model and the walls in 5-10 mm, depending on the size of the model, and glue to the base, then join the edges.
3. We pour the main component into a separate container, measuring the right amount, according to the manufacturer's recommendations.
4. Add a little color.
5. After zeroing the balance, we measure the catalyst and connect it to the base.
6. Within a minute, carefully mix the mixture until smooth.
7. Evenly, we pour the silicone into the mold and wait for it to fully solidify.

You can extract a simple model several hours after pouring, separating the shape from the base with a sharp knife. Then it is necessary to disassemble the formwork. Complex models are best removed after a day. It remains to gently cut the edges - and the shape is ready. Now you can start making unusual soap for free or for sale.