Setting up the bass guitar. Basic moments

How does setting up a bass guitar begin? First of all, you need to set up the anchor. A metal rod in the neck of the instrument is called "anchor". It has electric, acoustic, banjo and bass guitars, it is not used in classical instruments.

With the help of an anchor the deflection of the neck is regulated, which in the recent past was made of strong wood species, besides expensive at cost. We watched how he behaves in the work, before adjusting the overlay. Finally, there was an anchor rod - an indispensable thing to adjust the neck. Its ability is that it does not bend under high pressure. It is believed that for the first time a patent for the invention of the anchor was obtained by a certain Tadeus McHugh in 1921.

Anchor rod is mainly made of steel, but also used for its manufacture is titanium, graphite. It is placed between the neck and the lining. Weakening the anchor, you can achieve that the neck is bent, and the gap between it and the strings increases. Or, on the contrary, when tightening the anchor, it straightens and becomes rigid, and the strings "lie" closer. The depth of the bend can be recorded by every guitar owner on their own taste.

Anchor rod forces the instrument to "work" on a particular guitarist with his own personal "musical" passions. Correct setting of the bass guitar allows you to adjust its height and tone. After some time, the neck is subject to weakening, so the anchor is indispensable for pulling it to the desired side. In addition, the deflection is adjusted when changing the string's caliber, changing the air temperature and humidity.

How does the bass guitar tune work ? There is a special adjusting bolt on the head of the neck under the lid. It is necessary to unscrew this cover. Most guitars have a bolt at the base, where it connects to the body of the instrument.

In order to adjust the bass guitar or electric was performed properly, first of all, you need to achieve the necessary gap between the strings and frets. Those that are located from the neck at too small a distance, grazing at neighboring frets, begin to ring.

This is because there is an inflection in the direction. It is important to understand the process and act independently, carefully tweak what you need, and carefully monitor the result of the sound. You need to make sure that the key for the anchor perfectly fits the guitar and does not damage the thread. If the key does not turn, you must immediately stop the independent "repair" and take the tool to the master.

You can also adjust the distance between the flaps. The bass guitar's mensura is 864 mm. To set it up, you need to change the length of each string. Do it only on new strings, on the old it's almost impossible. Adjust the scale should be after the anchor and the strings above the neck.

It is important to remember that setting the bass guitar should not be accompanied by sharp movements, otherwise it can lead to undesirable consequences. If everything is done correctly, then your instrument will sound long and dignified!