Rating of spinnings for gig (reviews)

To date, catching a jig is considered one of the most productive types of fishing with spinning, so the majority of anglers prefer to use it regardless of the season, but the most productive it is in the process of winter fishing. Looking at the rating of the spinnings for the jig and choosing the most optimal device for yourself, you need to pay attention to a sufficiently large number of different characteristics, including reaction speed, bite control, the possibility of casting to a sufficiently long range, and performing quite sure cuts. At the same time, depending on how correctly the spinning is chosen, the success of such fishing depends directly.

What do you need to consider?

To check the rating of the spinning for the jig and to be determined with the model follows after you have been thoroughly disassembled in the conditions of your fishing:

• Fish from the shore or from the boat will be caught;
• How deep is the pond on which fishing is conducted.

It should be noted that in order to exclude any errors in the selection process, it is important to understand what differences there are between the spinnings and under what conditions different species can be used. Among the main characteristics of spinning is the following:

• coil;
• material;
• test;
• length;
• System.

Rod

In the majority of cases, the rating of the spinning for the jig includes devices whose length can range from 240 to 270 cm. When using a shorter rod, there may be various problems with regard to the casting distance, since lightweight baits can not easily be thrown at a range of 50 or even 70 Meters, and if you use a short rod, then it is impossible in principle. At the same time, too long rods are not the most effective, although some professional anglers prefer to view or compile a rating of spins for a jig whose length is 330 cm. It is believed that it is optimal for beginners to use a spinning length of about 240 cm.

Story

If the length of the rod is not so difficult to determine, it is much more difficult to determine the system that the spinning for the jig should have. The rating includes many models with different systems, which can not be determined by eye and can only be felt.

The design of the rod allows you to understand how much spinning is flexible and how quickly it reacts to bite. Quite often, when choosing spinning for a jig, the rating is scanned to determine the fast and sensitive patterns in which the tip of the rod is bent. Such a system is called "terminal".

Also there is a slow parabolic system, when using which the entire rod is bent completely.

Choose in this case, depending on what you think is more significant. The best spinnings for jig (a rating below) with a slow system provide soft long casts, while the fastest system is characterized by maximum informativeness and perfectly conveys the sense of wiring. The most optimal solution can be called a combined system, which, with minimal loads, shows the main advantages of a fast system, while at a sufficiently strong impact it starts to work as a slow system.

Telescopic rods are almost not included in the best spinnings for jig (the rating of the best spinning), as they are extremely poor in conveying information regarding the bite. Quite often there are such situations when it is possible to detect the biting only visually in accordance with the movement of the tip of the rod, since such movements are not transmitted to the hand due to the fact that they are lost in numerous joints of links.

Test

The spinning test, which is included in the spinning rating for the jig from the boat, corresponds to the average and lightweight class, and the weight of the head in this case is approximately in the range of 12-38 grams. Heavier heads are best used when there is a need for long casts, while in the process of fishing, when there is no need to do long casts, a fairly easy bait can be used.

Material

The choice of rod material for fishing with a jig directly depends on how long the spinning rod will be used. Three-meter rod, which is made of a fairly cheap glass fiber, will eventually have a large weight, so that its use will be extremely difficult. It is for this reason that long rods are included in the rating of spinning for "light" jig, since they are made of composite materials or CFRP.

Coils

The coils in such spinning can be either inertial or inertial. The latter are quite simple design, and therefore are extremely easy to operate. To date, the manufacturers offer a fairly wide range of such products, but they should be selected according to the following characteristics:

• The presence of an increased spool;
• The possibility of an instant reverse stop;
• Manufacture of a roller and a bobbin from a material of high quality.

All these requirements are due to the fact that during the wiring can be quite a large load, and while the braided line, which is often used in jig, has abrasive properties.

Modern inertial multiplier coils have practically no disadvantages in comparison with non-inertial ones, since they differ by fast winding of the line, and also by high informativeness, when it is possible to perceive information from the line through the hands. It is for this reason that the rating of spinnings for a jig up to 50 includes devices with such coils. Despite the fact that you can not meet them so often, they are practically inferior in effectiveness.

Sections

No less important is the parameter, such as the number of sections in the spinning used. The majority of spinnings is usually made from only two sections, combined by inserting one into the other. There are also many other options for telescopic rods that have six to eight knees. Experts say that plug rods in this case are characterized by maximum sensitivity and strength, despite the fact that the models are very different and always need to look at such characteristics as the cost of the product, the quality of the material used and the connections in different models.

Rating

Next we will consider a small rating of spinning for jig. Reviews about each device users leave mostly positive, so their use is optimal for both beginners and professionals:

• Black Hole Hyper. Such spinnings are specially made for fishing with the help of jig. This line includes rod length 2.7-3.2 m, while the test is from 4 to 50 grams. The golden mean in the lineup is the Black Hole Hyper spinning, which has a length of 270 cm and a test from 8 to 28 grams, which is perfectly optimal for conducting deliberate fishing using an average or small head. If to consider, choosing a spinning for a jig, a rating of manufacturers, company Black Hole will be one of the advanced.
• St. Croix Wild River. This model perfectly copes with its tasks. The length of the rod here reaches 289 cm, while the test is suitable for the range from 10 to 35 g.
• St. Croix Avid. This spinning is also distinguished by the presence of several models in the line, while all of them are ideally suited for various parameters for fishing for jig baits.
• Shimano Game AR-C. The ruler provides an opportunity to choose both a light spinning for jig, and more sophisticated models. It is considered one of the most optimal options for conducting high-level jig. In the line there are models with a rod from 2.5 to 4.1 meters long, while the tests start at 6 and reach a limit of 84 grams. If you are not used to spare money for quality, many experts recommend paying attention to this option, but at the same time the cost of products starts from 12,000 rubles.
• Banax Meaga. Excellent spinning for the jig, which has a rod length of 2.74, and casting from 7 to 35 grams.
• Major Craft Restive. The optimal option at a reasonable price, which is famous for a fairly high degree of sensitivity when using silicone baits on the bottom. The length of the rod is 257 cm.

Budget Options

Next, we will consider the budgetary spinning for jig. The rating was formed primarily not by value, but by how much the price-quality ratio in such products is manifested:

• Black Hole Hyper. Strangely enough, but the above device is a very budget option compared to most of its counterparts. The price of this spinning is only about 5500 rubles.
• Bass Pro Shops. The cost of spinning ranges around $ 100, which is why almost every fisherman can afford them. That is why their use is quite common among most other models.
• Volzhanka. Quite cheap rods, which are distinguished by an excellent ratio of price and quality. Not inferior in quality to the above devices, their cost starts from about 3000 rubles, which is very, very good.
• Daiwa Tornado-Z. Also a good option, in which the length of the rod is 272 cm, and the test is 15 to 50 grams. Despite the fact that most of the models from this company are slightly more expensive than those considered earlier budget models, they all differ tremendous build quality, which is important.
• Shimano Catana CX. One of the best lightning spinnings for jiga, with a cost of up to 3000 rubles.

Heavy and light

Heavy spinnings provide for catching with the help of oscillating spoon-baits with front loading. The test of such spinning reaches 100 g, but sometimes it can even be higher. They are ideal for fishing at a sufficiently large depth, and differ from other models by a sufficiently large emphasis on the maximum strength of the material. At the same time, their cost is several times higher in comparison with ordinary spinning rods.

Where are the lungs used?

Lungs are intended for fishing in places where there is a small current or even it is completely absent, nor are they calculated for long enough casting. The test of light spinnings varies in the range from 5 to 20 g, which means that baits with such weight will be distinguished by excellent sensitivity during wiring.

Light spinning makes it possible to provide the highest possible sensitivity, and when using coarse, weighty gear, they lose their effectiveness.

Helpful Tips

In any case, you should understand that a really high-quality jig-spinning should be distinguished by a fairly sensitive top. Jigging involves a detailed palpation of the bottom of the bait, and the various pincers of the bait on the ground should be fully traced when tracking the tip of the rod.

Thus, the choice of spinning should always be done depending on a number of conditions. First of all, you should take into account your financial possibilities, choosing between budget and advanced devices, but in addition, it is equally important to take into account the conditions of fishing, as in small reservoirs it is not necessary to use any extra-long expensive spinning.