Pattern of a coat-cocoon own hands

Today's variety of women's wardrobe is amazing. A huge number of unique styles and styles in combination with bright and gentle shades, as well as contrasts and original decor make the modern girl simply fascinating. Fashion designers work tirelessly to create new images, continually drawing inspiration from the styles of the past. So they decided to turn the eyes of the beautiful half of humanity to a cocco coat popular in the 50's and 70's of the last century. The photo, the pattern of this product, and the description of the tailoring process will be discussed in this article.

Manufacturing options

The ability to sew or knit has always been in price. Not every woman has the talent of a skein of thread or cut fabric to create a unique thing that will take a worthy place in the wardrobe. But if there is even the slightest ability and the desire to develop them, it's just wonderful.

The idea to sew or tie a coat-cocoon with one's own hands is an excellent way to start the creation. This garment will ideally look in any performance. It can be a large knit from a thick thread or, conversely, an openwork weave; A coat on a satin lining or an insulated sintepon option. In this case, everything in the hands of the master, and only her imagination determines the style of performance.

Selection of fabric for a coat

When sewing any product is very important to choose the right fabric. Naturally, in this case, you should choose suitable materials. It can be soft cashmere, tweed or polor or more coarse linens, such as boucle or drape. The appearance of the fabric depends on the interlacing of the threads. It can be satin, twill, linen or combined.

For the winter, the best option will be thick-walled linen, which can be duplicated with a lining with a heater or a podstezhku. For the demi-season variant cashmere with a thin lining will suit. But for a very thin coat is better to choose gabardine or diagonal.

When choosing the material, you need to consider what will be the pattern of the coat-cocoon. Fabrics with linen weaving, which can be attributed to heavily loose materials, are more suitable for models with whole-sleeved sleeves. It should be noted that the material can be whimsical. Do not take too soft linens for such a model, because the coat should keep the shape. It is also undesirable to use highly stretchable fabrics that can deform during the wear process.

We buy yarn

With the choice of yarn everything is much simpler. There is only one rule: the thread must be of sufficient thickness. The composition in this case plays a secondary role. However, what prevents to experiment? The pattern of the coat-cocoon, which is used when knitting a thing, is identical to the one on which the product is sewn. When decoupling the details, it is important only to observe the proportions and repeat all the curves of the template. Therefore, when choosing a yarn, the thickness of the future woven fabric should be taken into account. If the yarn is too thick, then you have to increase the pattern a little on the perimeter, if the thin - to reduce.

Ideal for a warm knitted coat are yarns such as boucle, wool, wool, mohair. But, of course, nobody canceled the experiments, so you can try to create an amazing knitted thing made of yarn with beads, paillettes and lurex. Yes, such a product will not come out warm and, rather, it looks like not on a coat, but on a smart sweater, but for a summer or spring evening it will do. Naturally, the pattern of the coat-cocoon in such a performance should not be with too much allowance for free fit.

Merck is the basis for work

The product template is the basis for any thing, be it factory or individual production. How to build a pattern? It is not difficult to make a cocoon-cocoon with one's own hands. First you need to take measurements from the figure, and then correctly transfer them to paper. If there are problems with the design, you can go one of the simplest ways.

What is the easiest way to make a pattern? The coat-cocoon has a one-piece sleeve. And this particular option is perfect for beginners. Building a workpiece is not difficult. First of all, you should take measurements: the volume of the neck, chest and hips, shoulder width, sleeve length and length of the product, chest height, the length of the transmission to the waist. You can also make a control measure from the wrist to the wrist through the neck to facilitate the construction process.

For a template, a dense construction film, on which you can draw with an ordinary ballpoint pen, is best. It is fairly easy to store, does not tear and does not crumple, unlike paper. So, how to make a pattern? Coat-cocoon with their own hands is created easily.

Building a Pattern

Details of the front and rear linens are almost identical, the difference is only in the depth of the neck, and also that the front should consist of two halves and have allowances for the decoration of the fastener. The drawing is based on a straight line constructed of two straight lines, where the vertical is equal to the length of the article, and the horizontal is equal to half the neck circumference + the width of the shoulder + the length of the sleeve. Then follow the auxiliary lines: the chest line, which is laid off from the top of the vertical angle according to the measurement of "chest height", the waist line according to the "length to the waist" measurement, and the thigh line (below the waist by 20 cm).

Then you can begin to build a sleeve. In the place where the measurement of the length of the shoulder ends, it is necessary to retreat down from the straight line about 4 cm and lay a new line, continuing it in accordance with the "sleeve length" measurement. After a right angle on the edge of this line, you should drop 10-15 cm, depending on the desired width of the sleeve and the thickness of the wrist. Next, connect the line of the chest and the line of the bottom of the sleeve, making a rounding in the armpit. After that, it remains to determine what should be the narrowing of the product down, and continue the existing line of the sleeve lateral seam through the thigh line to the bottom. Everything, ready pattern. Coat-cocoon with a whole-sleeve sleeve is ready. It remains to add details, and you can start sewing.

Pattern modeling

Items such as a clasp, pockets, darts, embroidered seams, collar and cuffs are the parts that are indicated on the basic pattern during the modeling process. Without them, the products would be boring and monotonous. With these elements, you can correctly place the accents and create an ideal image. The pattern of the coat-cocoon itself is so original that sometimes it is minimalism that gives things a special charm. However, with a clasp, sleeve length, gate option and pockets, you can experiment. Modeling a coat-cocoon is one of the interesting stages, as during work a simple template turns into a unique thing.

Cutting and assembling

After the template was prepared from the film, you can transfer it to the fabric and proceed to cutting. Here we should remember the allowances for seams about 1-1.5 cm, depending on the type of fabric. It will also be necessary to draw along the neck and anterior incision at a distance of about 5-7 cm lines parallel to the edge of the pattern - this will pick up the products, they are cut separately from the main fabric with the same allowances for the seams, as with the rest of the parts.

Assembling the basic elements of the coat does not represent anything difficult, but with pockets will have to tinker. If there is absolutely no experience in the tailoring, it is better to make pockets in the side seams. They must be completed before assembling all parts of the coat. When the preparatory work with the pockets will be finished, you can start sewing. First, the details are sewn along the shoulder seams, which pass into the seams of the sleeves. After the shoulder seams are sewn on the details of the flanges and connect this element with the base coat of the coat.

With a knitted product much easier. The details in the binding process are adjusted to the size of the template, and after they are ready, they are simply stitched. If in the plans - a product with a lining, then it will be necessary to tie up additional collars corresponding to the pattern. With pockets should do the same as when sewing. One piece should be knitted, and the other - cut out of lining fabric.

Pocket decoration

To make out a pocket, you need to cut out two parts from the pattern of the circled hand from the wrist and to the fingertips of the main fabric and the lining. Then the lining is sewn to the side seam at the level of the hips on the front half of the coat, and the blank of the coat fabric on the back. This is done so that when you enter your pocket you can not see the lining. After that, the details of the coat are combined along the side seam and connected by straight stitching. The halves of the pockets are also pinched off and stripped off with an iron.

A knitted cocoon coat with pockets in the seams is made according to the same principle.

Working with a lining

In order to make the lining, you first need to cut out the details of the prepared patterns. It should be noted that the patterns should be unbirched. It should also take into account allowances for seams about 1 cm. Works with a lining a bit. First, close the shoulder and sleeve seams, then go to the side. Next, the lining is honed to the collar. The final stage is the bending of the bottom of the product and pritachivanie details of the sleeves of the main and lining fabrics.

Knowing how to sew a coat-cocoon, the pattern of which is given in this article, you can save a decent amount of money, because this thing today in a trend, and the store for it will have to pay a lot.