Coat with an all-embroidered sleeve: a pattern and processing features

Sew a beautiful coat for the spring by own hands can each girl. At the same time, the cost of a new outfit will be minimal, and instead of acquiring only one thing one can please yourself with new outfits for saved money. Moreover, sewing the product does not take much time and does not require any complicated calculations and drawing drawings.

A coat with an all- embroidered sleeve, the pattern of which will be described below, is the best solution for creating a stylish and inexpensive image, which is sure to be appreciated by women of fashion. If you make some modeling changes on this template and add vertical relief seams, slotted or patch pockets, hood, thawed darts and other details, you can get a decent version of the product, in no way inferior to models from designers. Coats with an all-embroidered sleeve, photos of which are presented in the article, will be a good source for inspiration and flight of imagination.

Removing measurements

Before you go to the store for a cloth, you should determine the number. To do this, you will need to take measurements from the figure. To sew a coat with a whole-sleeve sleeve, you will need to measure the volume of the chest, hips, chest height, and the length of the product, the length of the sleeve, the width from shoulder to shoulder, and a control measure from the wrist to the wrist.

To calculate the fabric, you need to understand how the product will be wrapped. It will require a canvas with a fold not less than 1.5 cm wide, equal to two product lengths + half a meter to decorate a beautiful collar and belt. If the width of the tissue is smaller, then it will be necessary to calculate, taking into account the fact that the backrest will be stitch along the midline, and the shelves will be cut apart from each other.

Material selection

The best solution for a cozy coat with a one-piece sleeve is soft cashmere or polor. But from the canvas, which includes woolen fiber, it is better to refuse. Such a cloth, though natural, is prickly, and in it is not entirely comfortable. In addition to the main fabric, the product will require a lining material. It is better to give preference to satin linen or dense lining fabric. From thin nylon it is better to refuse, as it very quickly climbs at the seams.

Open the fabric

The simplest version of a coat with an all-embroidered sleeve is a kimono-style pattern. Its details can easily be supplemented with a collar-stand and a strip for overlapping one shelf to another for decorating a button fastener or sewing buttons. Patterns of a coat with a one-piece kimono sleeve can easily be remade into a so-called cocoon model, which is very fashionable this season.

The process of creating a template for such an article is as follows: the fabric is folded in half across the cut, and then again in half, just along. On the bend mark ½ the measure from the wrist to the wrist, put the center point and make a mark for ½ width from the shoulder to the shoulder. Dale perpendicularly to the bend from the received point, lower the line in accordance with the measurement of "chest height" + 5 cm. This line defines the border of the armhole. From her will be built the lower seam of the sleeve. On the top the sleeve can be made without a seam. In this case, the best solution will be to cut the wrist tucks every 5 cm deep by 1-1.5 cm to narrow the lower cut. You will also need a strip of fabric to decorate the cuff strap.

From the lower border of the armhole, also comes the lateral seam. It should be criss-crossed to the hip line at a distance from the fold, equal to ½ of the hip circumference (+ 3 cm for a loose fit), and again cut down as in a pencil skirt - about 5-7 cm. If the chest is large, Tucks in the side seam, extending the front shelves to the guard distance. You can omit this time. After the bend, you need to cut the front shelves, and leave the back sheet intact.

Open the collar and bar

To make the product complete and protect the neck from cold on a cool spring day, you can arrange a small collar-stand approximately 5-7 cm high. To do this, you need a strip of fabric with a bend length equal to the cutoff value along the neck. Usually, the throat is made not so closely fitting that without trouble under the coat it is possible to wear a warm sweater with a lapel. For fastening, you will need a strap on your coat with a one-piece sleeve. The pattern of this element is also an ordinary strip of fabric folded in half. In the finished form, the bar can be from 3 to 10 cm.

The lining fabric is delineated and is cut taking into account allowances for seams similarly. From this cloth do not need to cut only the gate and the bar with cuffs, and on the hem is made 5 cm shorter than the base.

Assembly Features

It is not difficult to assemble all the parts. First, sleeves and side seams are processed on the base and underlay. After - the bottom of the hem and sleeves. Here it is worth noting that you only need to connect the parts in the sleeves along the neck and the front section. At the bottom it is better to make a flying lining. This will facilitate the adjustment of the lining fabric and will save you from unnecessary problems, ensuring a flat bottom edge on the coat with a one-piece sleeve. The pattern presented above can also be used for a product with a sewn lining, but to prevent different creases and unnecessary folds of material from forming on the thing, you need to tinker a bit.

Options for processing the bottom of the product and cuffs

To design the flying lining, the hem is processed in parts. First, the base is cut off and folded, and then placed on the adhesive tape or stitched with small stitches. The lower part of the lining is turned twice inside out and the stitch is laid. Only after these slices have been processed can one grasp the lining to the seam of the strip. The very same bar is processed at the bottom, sewing the seam into the interior of the details and laying in the lower bend of the hem.

Similar patterns of a coat with an all-embroidered sleeve are very simple to manufacture, and sewing products does not require much experience. Therefore, this version of a fashionable stylish product is available for both finance and handicraft skills.