Nipple drinkers for broilers themselves. How to make a drinking bowl for broiler chickens own? Feeders and drinking bowls for broilers (photos)

Broilers are one of the most common meat breeds of chickens. They are unpretentious and easy to maintain, but like all living things, they need water. At the moment there are quite a lot of drinkers that are sold in specialized stores, but their purchase is, first of all, forkiness. Given the fact that they will require a lot, the amount will be rather big. Drinkers for broilers themselves - the only way out of this situation. Homemade device will cost much less, so this will allow the breeder of birds to save money.

What is a drinking bowl, what are they

Chickens constantly need a source of fresh drinking water. It is this function (the supply of water) that is performed by the drinkers for broilers. With your hands made such a device will cost much less than in the store.

There are, in addition, a variety of drinkers, which differ from each other. There are mainly three separate classes: simple, vacuum and nipple drinkers for broilers. With your hands, you can make all of the above devices, because their design is not very difficult. The most perfect of them are nipple. It's already a whole system that needs some maintenance.

Do it yourself - the benefit will always be

Drinkers for broilers with their own hands (photos and instructions on how to apply to them can be found easily) you can do yourself. This will save money. For quality and practicality, homemade devices for drinking are no worse than factory ones. Made feeders and drinking bowls for broilers with their own hands - it is always profitable and practical.

The problematic of ordinary drinkers

When drinking birds, some problems may arise. Especially if a drinking bowl is made for chickens by own hands, then it can be very light or unstable. Then the tenants of the chicken coop can easily turn it over, and then the water will pour out onto the floor, which then will have a bad effect on the birds. Such a factor as instability or small weight can not be ignored, because such drinkers for broilers themselves simply will not be effective.

Also, water must be changed frequently, because it will stagnate. Stale water can lead to serious diseases of the entire livestock. Especially if a drinking bowl is intended for broiler chickens, one has to do everything to ensure that sharp edges are smoothed out and the water changes every day. The still fragile body requires careful care.

Nipple drinker - the solution of all the farm problems

What are the useful nipple drinkers? This kind of device is one of the best devices for installation in the coop. Thanks to their positive aspects, nipple drinkers for broilers, with their own hands are designed, are very common and popular.

Water does not arbitrarily flow out of the drinker itself. This immediately kills two birds with one stone: first, do not constantly change the wet litter; secondly, you do not need to run and add water to the drinking bowl, because it will not turn over. If you put drop eliminators, then not one drop will fall to the floor. Especially active individuals, who used to get dirty feet into the drinking bowl, simply can not do this, since this construction is of a closed type. In addition, the consumption of water will decrease , which will also save money.

To successfully introduce such technology in your hen house, you need to teach the hens themselves to drink from such a device. To accustom them is best from the very childhood. The nipple drinker for broiler chickens is very different from the adult one. The difference is that the nipple on it needs to be installed slightly different.

How to make a drinker for broilers yourself

First of all, you need to determine the type of drinker, and for how many individuals it will serve. If a nipple drinker is planned, then before starting work, it is necessary to prepare all the tools and purchase additional structural elements.

It is not easy to make a nipple drinker at first sight, but in reality there is nothing complicated. It will be collected by any person, even without experience in this field. The main thing is to have available and be able to use some tools.

What you need to create a nipple drinker: materials

How to make a drinker for broilers with your own hands, if there is almost no money for its creation? There is a simplified version of the drinker, which does not require many costs for the purchase of materials. The economical option is advantageous because it will take not only a few materials but also time to create it. Such a simple design is very easy to create.

Of the materials to create - a plastic and plastic pipe length of one meter, the same diameter of the plumbing "knee" and a cap. In addition, it will take another small piece of pipe of the same diameter. It will serve as a reservoir. This will consist of the whole basis of the design. The most important detail is the nipple. They are of two types: one thousand eight hundred and three thousand six hundred. If the broilers are already adults, it is better to buy a nipple for one thousand eight hundred (one such costs about fifty rubles).

What you need to create a nipple drinker: tools

First of all you need to be able to use all the tools. If some of them do not have some skills, then it's best to ask your friend or friend who can use it for help. Also do not forget about safety.

The first thing you need a drill with a drill diameter of nine millimeters. It is this size that corresponds to the diameter of the nipple itself. In order to correctly measure the distance between holes, you will need a tape measure. A conical tap with a diameter of nine millimeters will also be needed. A tap is a device for threading in holes. It is needed in order that the nipple can then be screwed into the pipe. You can do without threading, but then the place where nipples will be installed can flow. With a thread, you do not have to install the nipple tightly. If it clogs and breaks, then it can easily be replaced.

Valuable advice: it is best to buy nipples of foreign production, since they are at times superior to domestic ones in quality. The price for them will be more expensive, but it's worth it, because it is foreign samples that can serve for a long time and regularly, while domestic ones are often hammered and broken.

We collect drinkers for broilers by our own hands: device photo

Before you start, you need to prepare the site. It should not contain other items that could interfere with production. The base of the drinker will be made of a plastic or plastic pipe. Surely somewhere in the farm there was a piece of pipe, if not, then you can buy a piece in any specialized store or in the market.

It starts with drilling holes in the pipe itself. To do this, you need to take a tape measure and mark the place where you will drill with a marker. It is worth paying attention: the distance between two holes should not exceed twenty-five to thirty centimeters. It turns out, that from one meter tube it is possible to make a drinking bowl on four hens. From this calculation, you can calculate how much material you need for a certain number of birds. At each point, a nine-millimeter drill makes holes. This should be done carefully, so that the tube does not burst, and the holes are neat.

Thread cutting is an important stage in creating a drinking bowl for chickens. This tool has incisions, which form the future thread. Carefully screwing the tool into the hole, you can achieve accurate threading.

After threading, it is time to take up the joints of other parts of the pipe. From one end of it you should install a plug that will not let the water flow out. From the opposite end, the knee is placed at an angle of ninety degrees. The hole itself should "look" upwards. If the holes in the pipe "look" down, then the knee should be pointed upwards. A small piece of pipe is connected to the free end of the knee. It will serve as a reservoir.

Installing nipples

Before screwing, the nipple should be wrapped with a Teflon tape (special sealant) to prevent leaks. Then the nipple itself is screwed in by forceful movements. Screw it to the edge. The drinker is ready!

Checking

After installing the drinking bowls for broilers, it is worth testing. For this you need to observe that there are no water leaks. Nipples should all work properly, otherwise they should be replaced.