Multi-level ceiling from gypsum board with illumination by own hands

A multi-level ceiling made of plasterboard with a backlight is a ceiling plane, which differs from the one we used to see earlier. The combination of several elements, design and installation features give it a special charm.

General information

To date, finishing the ceiling with a complex design of several levels using plasterboard is very popular. Of course, the cost also goes more expensive than usual, but it's worth it. Variants of multi-level ceilings from plasterboard can be very different. Very often several planes combine different materials. It is for this reason that they are also called combined. For example, it can be a drywall and a special film used for stretch ceilings, GLA in combination with glass.

The arrangement of multilevel ceilings does not differ much from one-level ceilings. Of course, there is much more to be done. But if you follow the scheme clearly, take into account all the features of the material and technology, then this process will be quick and easy.

Design of multilevel structures

If you want to embody a multilevel ceiling of plasterboard with illumination in your house, then you need to think carefully about the design. The scope for fantasy is great. You can develop the scheme yourself or search the Internet for ready-made options and choose something among them.

The first thing to do is sketch, or a sketch. If you carry out self-repair work, try to sketch out on paper what you want to see on your ceiling. And if you trust this business professionals, they can already add the desired small details, so that the sketch turned out to be detailed.

For example, if you decide to see how the ceilings from hypo-cardboard look, see the photo in advance. Pay attention to the individual elements of the decor. Very beautiful look undulating lines, semicircles and circles.

Ceiling from two levels in the living room

A multi-level gypsum plasterboard ceiling with a backlight made in the living room is an ideal option. It is in this room that you receive your guests. A bright design will be an excellent opportunity to show them their good taste. Such a ceiling will not only look beautiful and make an impression, but also be highly practical. If one time to do it qualitatively, you can forget for many years about repairs and additional costs.

In addition, you can constantly play with the design of the interior, because the ceilings of plasterboard can sometimes be tinted, thereby changing the mood of the room. Do not forget about the decorative lighting - in the evening it will be very well fit in the overall atmosphere.

Design of a ceiling for a bedroom

There are a variety of multi-level ceilings from plasterboard. The photos once again prove that such a design solution can be moved to the bedroom, the main thing is not to overdo it with the decor.

Excellent will look a smooth ornament of pastel tones, which gently play in the backlight of the diodes. This combination will not strain your eyes, on the contrary, will give the atmosphere more coziness.

Design of the ceiling for the kitchen

Excellent impression produces a ceiling of gypsum board (photo).

The kitchen, even small in size, can play in other colors, if it is right to approach its arrangement. Light classical drawings will set the room a pleasant tone, which will accompany with cooking.

As for the lighting, additional elements must necessarily be combined with basic lighting. This option looks beautiful, and gives the design a special luxury.

Multi-level ceiling from gypsum board with illumination by own hands

In fact, the arrangement of such ceilings is not so complicated. The most important thing is to approach the installation responsibly, to follow clearly all the schemes and instructions. You can not doubt that, given all the subtleties, you can make such a design with your own hands.

All the work schedule is divided into several stages:

1. We create the initial project.

The design of the ceiling, consisting of several levels, implies the competent construction of planes. It is important to properly distribute the profiles. In other words, the first thing you need to do is outline the scheme, arrange the levels, all of this is useful for further editing.

Your scheme must contain the measurements taken. This will help in determining the amount of required materials and other elements (backlighting, decoration) with great accuracy. Do not forget that we are talking about the ceiling of several levels. When calculating the amount of finishing materials, this must be taken into account.

By the way, it is not necessary to cover the ceiling with several profiles in one place. You can play a little with the design, in some places leave the frame naked. If there is a backlight in a large area, this option will look good.

2. Make the markup.

This is one of the most important stages. Correct marking will affect the subsequent installation. Let us consider in more detail how to do this:

• The first thing we beat off the first level, it's not so difficult, especially if you've seen or know how to make ceilings from one level. Using the water level carefully on the perimeter, beat off the lines and give them direction.
• If there are places on the ceiling in which the main frame will need to be slightly reinforced, be sure to make notes there.
• Now proceed to the markup for the second level. It starts to be mounted only after the first level has been installed. Do everything according to the same principle.

What is required for installation: tools and profiles

A framework for a ceiling in most cases implies the use of CD and UD profiles. Also for work you will need tools such as hangers and connectors. Of course, you can do everything without them, but this is not recommended. Multilevel ceiling - this design is quite complicated, it is for this reason that it is very important to correctly and correctly approach the installation. It is better to use all the necessary tools, but then you will be sure of your actions. The finished version of the new ceiling will be reliable and pleasant in appearance.

How to make a multi-level ceiling from gypsum board: frame

In fact, the frame is installed quite simply. It is quite possible to make a person who does not have special skills. First of all, a framework is made for the first level, then for the second one.

At the beginning of the work on the walls we establish a guiding profile, while clearly you need to follow the markings that you made earlier. After we move on to the hangers. By the way, the level of hangers is very easy to adjust using a special leveling thread.

Finished the frame for the first level, it is necessary to cover it with plasterboard. Only after that, we can already move on to start making a second level for our ceiling. The principle is the same - marking, skeleton, plating. Do not forget about the distance that should share profiles. Be sure to read in the instruction what minimum clearance should be.

You may wonder how to make a drywall ceiling yourself. Of course, it is desirable that all the work is carried out in at least four hands. It's easier, and much safer. But if something happens that you are going to install montage alone, you should not be upset. Modern technology and simple tricks will help you. Just have handholds and racks on hand that you can use to support the frame, then extra help will not come in handy.

We make the installation

There is one very important rule that must be adhered to when installing a ceiling from several levels with backlighting. It consists in the fact that sheets of plasterboard should never touch the box. It is very important to maintain a gap between these elements, which is at least 3 to 5 centimeters. Further, this will help you avoid such troubles as cracks and distortions. Do not worry, the gaps at the end of the work will not be noticeable. You can close them with reinforcing tape, and then fix the result with the help of finishing.

Helpful Hints:

• It is best to use 9.5 mm thick sheets for the ceiling. Although in some cases, a thickness of 12 mm is more appropriate (it has greater rigidity).
• The edges of the sheet drywall must necessarily be processed using a plane.
• When you start fixing the sheets, this should be done from the angle that has the opposite direction.

The above tips will help you avoid distortions on the ceiling.

When the main work is finished, do not immediately begin to seal all the seams. There is no need to hurry. To a multi-level ceiling made of plasterboard with backlighting turned out to be ideal, always wait several days. Let the structure stand a little. Look at the finished ceilings from plasterboard. Photos of some works show that the frame can sink, and this contributes to the appearance of cracks. Therefore, when working, you must be extremely careful, only in this case the result will please you.

After a few days, do the following:

• We ground the ceiling.
• With the help of reinforcing tape carefully and very carefully seal all joints.
• To achieve the maximum level surface, we are engaged in putty. So the surface will look homogeneous, and then you can easily paint it or, for example, glue wallpaper.

By the way, one of the advantages of multi-level ceilings is that if you want, you can paint it from time to time. It will refresh the interior.

LED backlight: installation

Multi-level ceilings of plasterboard with a backlight in modern interior design are very popular. It's all about the originality of the performance and the effect that comes after finishing the repair.

If you decide not to make a simple ceiling from several levels, and add additional to the main lighting, the best option will be LED strips. The fact is that this is the simplest version of the backlight, which is easy to implement and looks pretty impressive.

You can easily do this work with your own hands, without resorting to the costs of professional workers.

Installation process:

• The surface for installation first thing should be well degreased. The fact is that LED strips are attached to double-sided scotch tape. If there is a little bit of fat or dust remaining on the ceiling, then your lighting will come off in a few days, and you'll have to do the dismantling and start all over again.
• After the surface is prepared, take the LED strip. On it you can see a special protective layer. It must be carefully removed.
• When you glue the tape to the ceiling, you need to squeeze it properly, so that there are no cracks anywhere.

It is very important to do lighting on multi-level ceilings from plasterboard. Photos can be found without problems. Look at how the ceiling should look after all the works are finished.

Most often, LED strips are sold wound on a reel. The standard length is 5 meters. In order for you to completely complete the design of one room, you will have enough of these three coils. Look, that everything looked unobtrusive. The excess of the additional lighting is more beautiful than the ceiling will not look.

We fix the LED strip correctly

Now about how to fix the lighting of the ceiling from plasterboard. Photo is a must see, this will help you with the installation.

1. The backlight must be fixed between the ceiling and the baseboard. The fact is that with this scenario the tape will not be visible, but the highlight itself will be very effective. In addition, the appearance will be aesthetic, your work is not different from the work of this master.
2. Think about how you plan to glue the backlight, even at the stage of marking the levels of the ceiling panels. You must leave the necessary distance, so that later it is clearly understood where to attach the tape. Maybe you want it to select only the upper tier, or maybe several separate parts.

Helpful Hints:

• Carefully study the scheme of how to properly connect ribbons from LEDs. It is important to take into account the polarity, otherwise the backlight will simply not work.
• To the power supply, the first thing to do is to connect the controller, only after that you can connect the tape itself.
• When you remove the protective layer, try to do it as carefully as possible. The slightest damage will affect the further process of performing the work.

Combined lighting

Very often you can find combined lighting. The original looks, if in the middle of the ceiling will be installed designer chandelier, and LED lighting will be located around the perimeter.

To the room harmoniously combines the design elements and the color of the LED strip, pay attention to all the little things. For small rooms it is not recommended to use too bright shades, this effect will make the space visually even smaller. Try to dwell on pastel tones, restrained and not provocative.

If you follow all the tips and requirements listed above, you can create a real work of art with your own hands.

In conclusion, it is worth noting that multi-level ceilings from plasterboard, the price of which varies depending on the amount of work, can be installed in any room. For small rooms, the cost is approximately 20,000 rubles.

With the right approach, a complex multi-level ceiling will produce an excellent impression. In addition, if you purchase quality materials from a trusted manufacturer, you can forget about the repairs for a long time and enjoy the aesthetic appearance of your ceiling. Of course, the fact that you made it with your own hands will be especially pleasant. There will be a chance to embody the fantasy of design that has always been wanted in the living room or bedroom. You can play with shades, different effects, do everything that comes to your mind. The main thing is to follow the proper marking and strictly observe all the rules. Only on you depends the future appearance of the room. The device of multi-level ceilings from gypsum cardboard is simple - in the presence of time and desire everyone can understand.

But if there is even the slightest doubt, it's better to entrust the matter to professionals, so you can protect yourself from the additional costs of dismantling and buying materials. If there are any special requests for design, do not forget to clarify them, so that the workers take this into account when drawing up the sketch.