Miter saws for wood. Comparison of firms-manufacturers

Miter saws can cope with wood cutting quite quickly. With aluminum profiles, they can also work successfully. The peculiarity of this power tool is an interesting design that allows you to change the position of the disk. As a result, the cutting angle can be adjusted. At the same time, the disc inclination parameters for the models can be very different. The power of this tool is controlled by the controller. To remove dust during operation, the device has a bag.

In addition, various functions should be noted, and one of them is a soft start. As a result, comfort from work can significantly increase. To date, manufacturers can offer many options for saws. According to their characteristics, they should be divided into budget, medium and professional models. From the choice of the buyer will depend on the characteristics of the power tool, as well as its price.

What are the parameters of the saw?

Among the important parameters we can note the power consumption of the device. This indicator is measured in kW. Voltage in many models is standard and is 220 V. However, the operating frequency can be very different. The power parameter of the miter saw affects the number of revolutions the disc makes. Also the manufacturer specifies its dimensions, on which the diameter of the saw blade depends. The angles of the bevel are measured in degrees. In addition, the manufacturer indicates the dimensions, as well as the weight of the tool. This indicator affects the comfortable use of the saw.

Saws from the company "Bosch"

The company "Bosch" in the market has always been remarkable for its quality. Most models are convenient and practical. In this case, the handles are rubberized and in the hand hold well. Dust extraction system for wood saws "Bosch" have. This process takes place with the help of a special branch pipe, where the air is sucked into the bag. Thanks to the built-in supports, the stability of the tool is at a height. In turn, the legs at the base are rubberized. The accuracy of the work is the ability to monitor on a special scale. To adjust the angle of the side of the power tool, there is a convenient regulator. The soft start system in all models is provided by the manufacturer. As a result, the disadvantages of drinking the company "Bosch" is quite difficult to find.

Comparison of models: "Zubr"

Miter saws on wood "Zubr" are capable to brag of the compact sizes. The average weight of the power tool fluctuates around 14 kg. For a minute the disk is capable of making more than 4000 revolutions. The frequency is maintained stable. The average thickness of the miter saws varies in the region of 2 kW, and the limiting voltage is 230 V. The diameter of the saw blade of the device depends on the modification. For the most part, the manufacturer specifies dimensions of 254 by 30 mm. The maximum angle of the disc is 47 degrees. The professional model of a saw in 30 thousand rbl.

Saws of the company "Metabo"

Miter saws on wood "Metabo" by characteristics are much inferior to models "Bosch". In particular, this concerns the strength of the structure. Thus, there is not enough stability during operation of the power tool. There are also some problems with the adjustment. The maximum tilt angle of the disc is only 45 degrees. The fixation system, in turn, looks unreliable.

Of the advantages can be noted powerful engines that are installed with a safety switch. As a result, the hard disk stops quite quickly. Models of this brand can be connected to a vacuum cleaner. When idling the disc is able to perform approximately 3800 rpm. The voltage of the device is standard and is 220 V. The frequency of many models is at around 45 Hz. The depth of cut at a small angle is a maximum of 90 mm. Average model of the above company will cost approximately 15,000 rubles.

What good are the "Corvette" devices?

Many crosscut saws on the tree "Corvette" are able to boast of simple control. The power of the power tool can be changed using the knob on the side panel. To turn off the device there is a special trigger. Running the hard disk is fairly smooth. Due to this, comfort from work is provided by a good one.

Among the shortcomings, we can note a weak stability. The working frequency of the miter saw is, on average, 45 Hz. The devices can operate from 220 V. Most of all, the models of the above company are suitable for domestic use, and there are few professional models on the market.

New models of the brand "Interskol"

Due to the large capacity, the crosscut saws "Interskol" on wood are able to gain good speed. The average frequency of the devices fluctuates around 50 Hz. The voltage of the network of many models is 220 V. Electric motors in collector saws. Of the features in addition, you can identify reliable protection systems. The maximum angle of inclination for the saw blades is 50 degrees. They are regulated fairly smoothly, and it's good.

Excellent stability of the device is provided by rubber racks. The lower frames are made of steel and are capable of withstanding significant loads. Professional models of this company produces with great success, but there is a bench saw for wood on average at the market of 16 thousand rubles.

Saws and their characteristics

Saws "Stark" have large disks in their kit. Due to this, the speed of rotation is good. In general, the handles of the models are comfortable. At the same time, the structures are fairly stable during operation. In the kit to the device, the manufacturer applies a key, as well as a brush for cleaning the miter saw. The adjustment of the position of the disc is two-sided. Protection system in all models is installed class "IP26". Directly, the disk decelerates quite quickly. The maximum angle of inclination is 45 degrees. These tools are capable of working with blanks of any length.

Devolt models overview

According to the characteristics of the saw "Devolt" most like the models "Bosch". Electric motors on them are also installed good, and the power have about 1.6 kW. The limiting frequency is at the level of 50 Hz. In general, the disk spins quite smoothly, and as a result, the saw can be done very accurately. Supports in many models are bilateral. In turn, the pincers are installed with a lock, and it is always possible to fix the workpiece.

The bag for collecting chips in the saws is mounted from the side. Thus, it does not interfere with the operation of the device. A metal case is attached to the saw. Due to the low weight of the tool, it is quite easy to transport it. Directly the disks are carbide-tipped. In addition, it should be noted that they are manufactured with tapes. As a result, the pendulum saw for wood "Devolt" can last for a long time, and the average model is about 16 thousand rubles.

Saws from the manufacturer "Hyundai"

Miter saws for wood of this company are most suitable for performing complex tasks. A feature of many models is convenient regulation. The angles of the disc can be set different. In many models there is a dust extraction system. Due to the powerful electric motor, the speed of revolutions per minute is more than 4200.

Consumption of electricity from saws is acceptable, and from the disadvantages one can note weak frames. Thus, the stability of the tool due to small legs is not very good. On average, the diameter of the saw blade is 254 mm. As a result, we can say that the saws of this company are inferior to the leaders in this area, but they are not in last place. A non-professional model of 20,000 rubles will cost an average buyer.

What is the Makita company ready to offer?

Miter saws for wood of this company are most suitable for professionals. Their limiting frequency averages about 55 Hz. The rated power of the electric motor is around 2 kW. The protection system is installed in class "IP 26". Thus, short circuits occur quite rarely. Another advantage of drinking this brand can be called quality handles with frames. They are completely rubberized and stand out with good stability.

As a result, working on power tools is quite comfortable. The saw blade is gaining momentum very smoothly. In comparison with the models "Bosch", the angles of inclination are better and make a maximum of 70 degrees. According to the dimensions of the model of this company are at an average level, and weighs usually saw about 10 kg. Of the shortcomings, only high prices can be noted. The professional model will cost the buyer in the market of 30 thousand rubles.

Characteristics of models "Vitals"

According to the parameters, the crosscut saws for wood of this company are similar to the models "Metabo". Electric motors in the devices are of a collector type. Protection systems are established by manufacturers rather qualitative, but problems with short circuits happen. For a minute, the hard disk can perform up to 3800 revolutions.

The limiting frequency of the power tool is at the level of 45 Hz. The average power supply voltage is 230 V. Saw blades are produced only with dimensions of 305 by 32 mm, and the maximum bevel angle is 50 degrees. The slopes can be adjusted during operation. Transmission of rotation in all models is available in belt type. Among the shortcomings, it should be noted the large size of the devices. The average weight of the power tool in assembled form is 23 kg.

Saws of the trade mark "Feida"

By the power of electric motors, the combined crosscut saws for wood of this company lose a lot. On average, the frequency is maintained at 50 Hz. A maximum of one minute a hard disk can make up to 4000 revolutions. In terms of size, this company does not stand out. The design is generally quite pleasant. The handles in the rubberized set and in the hand during work are kept perfectly.

Horizontal clamps are attached to the device. In addition, the manufacturer applies the stops, which help in the installation of the workpiece. Of the disadvantages, it should be noted the complex maintenance of devices. In this case the dust collectors do not work properly. Still it is possible to mention a weak system of cooling of the electric motor. As a result, the saw can not be operated for a long time without breaks. As well as saws "Vitals", transfer of rotation of a disk of belt type. The average model is about 14 thousand rubles.

Summarizing

According to the characteristics, the miter saws on the wood of the company "Bosch" and also "Makita" look the most preferable. If you choose among the middle-class models, you can distinguish the devices of the companies "Stark", as well as "Hundai". In general, they are universal and the prices are acceptable. The most convenient are the saws "Interskol", and for beginners they are perfect. They are also easy to maintain and are known for good performance.