Liquid insulation: reviews and recommendations

Under the influence of the harsh climate of most regions of Russia, manufacturers are forced to constantly improve materials and systems for insulation of buildings. One of the latest developments in this area is liquid heat insulation. Reviews about it already appeared on specialized websites and forums.

Features of liquid heat insulation

Initially, the composition was developed for the space industry, later they were interested in the builders.

This new material differs from the usual heaters by the method of application. It is distributed over the surface with a brush, spray or roller. Liquid insulation, the reviews are contained in the article, should be a layer approximately 1 mm thick.

After application, the composition is polymerized and forms a film having energy-saving characteristics.

Composition of liquid heat insulation

1. The filler. This component is made of a mixture of glass, ceramic and polymer beads. Inside they are filled with air. The balls are very small.

2. Acrylic or latex. These components act as a binder.

3. Additives. They give the thermal insulation special properties that are needed in specific operating conditions.

Mechanisms of heat preservation by liquid insulation

1. Radiation. Hollow balls inside the heat-insulating composition reflect and dissipate heat inside the room. Therefore, almost 90% of the radiated energy remains inside the building.

2. Thermal conductivity. Heat is transferred from heated objects to colder ones and increases their temperature.

3. Convection. This phenomenon of heat transfer by the substance itself. In the case of liquid heat insulation, the losses for convection are minimal.

Famous manufacturers of liquid insulation and feedback on their products

Today in stores you can find compounds for thermal insulation of different brands. The most famous of them: Korund, Magneterm, AstraTech, Armory and Acterm.

All these compositions are different manufacturers and scope of application. Liquid heat insulation, reviews about specific brands of which will be presented below, can be used for facades of buildings, roofing materials or pipes. Convenience of its application lies also in the fact that it can easily cover small parts of devices, handles and valves on equipment.

Liquid heat insulation "Korund": reviews and application features

This insulation is in demand among buyers, this is due to its ease of use. To apply the material, you do not have to buy additional devices. It is enough to be a roller, brush or spray.

The process of distributing the material over the surface requires the performer to be extremely accurate. The necessary heat-shielding layer 1 mm thick is better to be formed in 2-3 approaches. Each stage is carried out with an interval of about 24 hours.

From the accuracy of execution of all instructions depends on the life of the coating. This indicator is also influenced by the state of the surface on which the composition is applied. For example, liquid insulation "Corundum Anticor" should be distributed only over a well-cleaned from rust metal. This can be done with a special brush.

Liquid insulation of "Corundum", reviews about which are almost always positive, is issued with a special composition for application in the cold season. It should be borne in mind that on the working surface at this time there should be no ice and snow.

According to the owners of private houses "Korund" perfectly protects the basement pipes. With the correct application and observance of the technology, even after a few years on the processed metal there are no defects.

The high speed and ease of application of the "Korund" composition gives it an advantage over similar roll materials. This also reduces labor intensity.

It is important to purchase products only from authorized dealers, since only the original composition has all of the listed properties.

Liquid heat insulation "Magneterm": reviews and features

Several kinds of "Magneterm" composition are found on the market. Liquid insulation, reviews about which will be lower, is available for building facades, balconies, floors and basements.

A detailed consideration deserves "Magneterm Nord." This composition can be used from -30 to +80 ° C. The resins that make up the thermal insulator create a thin layer on the surface that passes the particles of steam. The moisture through the "Magneterm Nord" does not pass.

Before applying thermal insulation, you need to carefully prepare the surface, that is, clean it of loose areas, oil stains and metal chips. It is desirable to cover everything with a layer of acrylic primer for concrete.

It should be borne in mind that before using it is necessary to dissolve "Magneterm". Liquid heat insulation, reviews of which are not always positive because of the incorrect implementation of this stage of work, is diluted only by quality non-toxic liquids. Otherwise, the smell can cause intoxication in the residents.

Customers' comments on the liquid heat insulation "AstraTech"

Liquid heat insulation "AstraTech", which will be presented below, is intended for thermal insulation of facades, concrete floors, gas pipelines, sewerage, roofing and metal structures. Work with it can be carried out in a wide temperature range from -60 to +250 ° C.

This is a fairly new material, so buyers do not yet have reliable information about its environmental safety. Producers argue that AstraTech does not harm human health. Some buyers doubt this.

Liquid heat insulation "AstraTech", reviews of which speak of the simplicity of its application, gives 100% adhesion to the material. After distribution on the surface does not heavier the design, especially for metallic elements.

"AstraTech" is a liquid ceramic thermal insulation. Reviews about it, left by buyers, contain information that the liquid also protects against corrosion, condensation and mold.

Liquid heat insulation "Armor": reviews and recommendations for use

Among all brands of liquid heat insulation, "Armor" is the most popular. This is due to the availability of material at a cost and a wide range of products. Official dealers can find varieties for processing facades, metal structures and other types of surfaces. Each buyer will find a suitable option.

Reviews of home owners about this type of insulation are often positive. Negative opinions about coverage usually arise because it was incorrectly applied by builders.

Manufacturers recommend applying ultra-thin thermal insulation with a soft brush with natural bristles or an airless spray. About the preferred brand of the latter must be clarified with the regional representative of the company.

Recommendations for use and customer feedback on liquid thermal insulation "Akterm"

The field of application of liquid thermal insulation "Akterm" is quite wide. It can be used for thermal protection of roofs, ceilings, floors, walls, foundations, pipelines, water storage tanks and many other needs. For each type of surface, a separate material type has been developed.

Liquid thermal insulation "Akterm", reviews about which can be found on many sites and forums, is characterized by ease of application. Buyers say that the coating works better if it is applied in several thin layers. Fans of self-repair also note the almost complete absence of odor from the composition, which facilitates the work inside the room.

Thus, the liquid insulation, reviews about different brands of which were presented in the article, can be used for various surfaces. Choosing it, you need to pay attention to the marking. It is forbidden to use compositions for facade works indoors. For places with high humidity, you can choose specialized liquids.