How to install blinds on plastic windows. How to install blinds on plastic windows

Blinds on windows is a fashionable and convenient element of a decor which gets the increasing popularity at consumers. Its installation takes a little time, but nevertheless requires certain knowledge and skills. Of course, it's better if you invite a specialist, but you can handle this task yourself. And today's article will tell you how to install blinds on plastic windows, giving a detailed instruction of this process.

Methods of installing blinds

Blinds are fixed in one of three ways:

1. In the window aperture.
2. On the sash window.
3. Inlay.

The choice depends on the wishes of the owner and the design of the window. For example, if you fasten horizontal blinds made in the form of a continuous web to the slope of the window, they can interfere with the opening of the doors, and each time before using the window, you will have to completely collect them. Hence, it would be wiser to install separate canvases on the window sashes.

By the way, the described decor element can be installed both on conventional double-leaf windows and inclined roof windows, and at the same time the general principles of installation are preserved for all types of window constructions.

Measuring works

Before installing blinds on plastic windows, you need to make the most accurate measurements. And this is done taking into account the type of installation. It is important not to forget some details.

• For example, if you decide to fasten the blinds in the window opening, then take measurements from the window size about 2 cm in height (so they will not touch the window sill).
• A version of installation in the overlay requires adding a measurement of 5 cm wide on each side to close the window opening.
• By the way, when measuring the size of the blinds, which will be fixed on the doors, you need not forget about the window hardware: it should not interfere with the canvas to climb and fall.

The height of the blinds you determine, taking into account the wishes: either it will only be up to the window sill, or - to the floor

In order not to be mistaken and to be sure of the correctness of measurements, it is possible to have with you the exact parameters of windows when buying blinds, then specialists will professionally produce the calculation for you.

Layout and installation

Features of the design of blinds for plastic windows require the most accurate measurement and installation. To do this, you first need to make a marking of the fasteners.

Make sure that the blinds do not interfere with opening and closing the window. From the side where there will be a regulating cord, make an additional fastening, as in this place the construction will be provided with an increased load.

Fasten the fastening elements of the blinds to the wall or ceiling using screws and dowels. Then install the cornice, to which the sliders and lamellas are attached. Do not forget to check if the blind control mechanism works well!

Features of fixing vertical blinds on a plastic window

The only difference in how to install blinds on plastic windows (depending on whether the horizontal or vertical shape have these curtains) is the choice of the location for their fastening. If we are talking about horizontal blinds, then they can be hung on the upper part of the slope, and on the window itself, and the vertical ones - only at the top above the window opening. By the way, for the convenience of use and for the parts of such curtains not to swing strongly in the air from the draft, each plate is supplied with a load and additionally communicates with the neighboring lamellae with a plastic chain.

What is the problem of installing blinds for plastic windows

Plastic windows are considered problematic enough to install blinds. The fact is that when drilling it is possible to spoil not only the fastening element of the decor, but also the window itself. Therefore, be extremely careful, and if possible, give preference to those types of fashionable decor that can be attached without drilling - so you will save strength and do not damage your beautiful windows.

If the blinds are installed on the sashes of the window, then their width should be equal to the width of the glass, with a margin of 3 cm (one and a half centimeters on each side). Use for installation special fasteners for this type of windows, which allow you not to drill the window profile.

Roller shutters for plastic windows

Roller shutters are also called fabric roller blinds. They have practicality and functionality, giving the room a special comfort, and often acting as a bright detail of the interior. Undoubted advantages of this type of decor include compact design, as well as the ability to perform installation with a double-sided tape.

To install roller shutters on plastic windows, you need to purchase those that consist of a box in which the roll is located, and flat or n-shaped guides. By the way, the presence of these parts allows the use of curtains on the swivel-folding window sashes.

Installation of blinds

Depending on your wishes, installation of roller shutters can be done both above the window opening and inside it. You can also choose the type of installation: fix the curtains to the walls or to the ceiling. Often roller shutters can simply be screwed with screws or, for example, attached to the curtain rod. For the installation of blinds on plastic windows without drilling in OBI or other branded building markets, you will receive special brackets for clamping. With their help, you can, without drilling holes and causing damage, fasten the roller blind on the window frame.

Features of attaching roller blinds to double-sided scotch tape

Measurements for roller blinds are produced both in width and height along the outer edge of the so-called window bead (a centimeter plastic frame around the glass). At the same time, keep in mind that if your window has a curly or rounded edging, then it requires adding 9 mm on each side to the gauges, since in this case the curtain guides will be glued a little further.

Remember that it's only possible to install blinds on plastic windows using the building level!

• Before installing the side guides of the bezel, degrease with an alcohol-dampened cloth. This will give the adhesion of surfaces greater reliability.
• Then, on the double-sided adhesive tape, glue the guides, gently squeezing them along the entire length.
• On the same tape is glued and box-cassette with a roll. Set it above the window sash, carefully leveling, and then lower the curtain slightly to get into the slots of the guides, and carefully press the box against the surface.
• Fix the necessary length of the chain to lower the shutter.
• All. Your new blinds are ready for use!

A few more tips

Before installing blinds on plastic windows on your own, note that for expensive types of these curtains provided with a warranty, there may be problems with warranty service afterwards.

If you still made a mistake in the measurements, and, for example, the horizontal blinds were longer than necessary, remove the lower cornice from them, untie the cord and remove the necessary number of lamellas. Do not forget to cut off too much of the cord! Excess width of curtains cut only when folded and always on a flat surface.

As with pollution, wash plastic blinds with soapy water, and the fabric roller blinds, if not prohibited by the instruction, should be erased at least once a year. To do this, remove them from the eaves and, having rolled up into a roll, put in the detergent solution - the dirt will easily come down from the curtains. Hang them back damp, and when dry, they will straighten out under their own weight.

You have learned what is the peculiarity of installing blinds on plastic windows, how these curtains are attached and how to care for them. We hope you will be able to make the right choice and decorate your interior with a fashionable and bright detail.