Lighting the discs with your own hands - tangible savings and excellent effect

The tuned car always stands out among other cars on the road, parking lot, etc. Tuning can be different, but the most attractive looks light, which separates this or that part of the car and attracts attention of passers-by to it (and to all cars). The most popular in Russia today is the LED lighting of discs, which can be made at will, making a thin accent or lighting the entire wheel of the wheel.

It is not necessary to produce light decoration in salons or workshops, it is possible to illuminate the discs with your own hands. You can make it on wheels, the bottom of the car, the radiator grille and other elements of the car, which will look great, especially in the dark.

From what type of lighting you pick up, what color and what power lighting, depends on the appearance of your car after the tuning.

In most cases, the illumination of the discs with their own hands is performed on the front axle of the car with the help of an LED tape, the installation of which is carried out along the edge of the protective casing. The complexity of the job depends on which tape you purchase. If it is on an adhesive basis (double-sided scotch tape), then the work will be reduced to a thorough cleaning of the disc surface and degreasing it for maximum gluing effect. In case you use a conventional LED ruler in your work , then it is necessary to drill holes about 7 cm apart from each other, in which the clamps will be threaded.

If the car does not have a protective cover, then the lighting of the discs with their own hands is as follows. You need to create an additional design (imitation casing), which will serve as an element of fastening the LED backlight. The frame can be made of any material, for example, a mounting tape. To fix it, additional execution of the rays that are attached to the disk is required, after which the simulator itself is mounted. With the help of clamps, a ribbon of light is attached to it.

If you want the illumination of the disks to be located in their center, then it is advisable to use the metal tape from which the construction is made. She puts on the brake disc from the outside and attaches to the protective casing. The LED strip is mounted on this structure.

Likewise, the drive lights themselves for the rear axle of the car. If there is a protective cover, then the tape is attached directly to it, if it is not there - we are preparing an imitation.

Wiring is laid on the body of the car so that it is most protected from damage. The best option for wiring is the brake hoses, which will provide flexibility and durability. Method of attachment - conventional clamps.

As for the legality of such tuning, it should be noted that the law says nothing about the prohibition of the use of LED lights, so you can not formally make a comment about this.