Leveling the floor with a self-leveling compound: tips and tricks

Leveling the floor with a self-leveling mixture greatly speeds up the repair process, since you do not need to install beacons. This procedure is performed quite quickly. It is very important to choose the right mixture for leveling. So, there are such substances that are capable of eliminating large defects, and there are also those that are intended to correct small errors in the surface.

It is also necessary to say that the leveling of the floor with a self-leveling mixture is draft, finish and special. The first type of solution is used in the event that it is necessary to eliminate significant defects. The fact is that it forms a fairly thick layer. The finishing mixture should be used only if the surface has no strong errors. If it is necessary to close cracks or strengthen certain areas of the floor, then special solutions of increased strength should be used.

There are also single- and multicomponent compounds. The first type is easier to use, since it does not require the addition of any other components other than water.

Leveling the floor with a self-leveling compound is not a difficult process. As for the duration, the procedure can take from a few days to 1-2 weeks (depending on the drying time of the selected remedy). So, to start with a drill with a mixing nozzle, you need to mix the required amount of solution. Before this, the base surface should already be prepared: cleaned, leveled and primed.

Then, the floor is leveled with a self-leveling mixture as follows: the solution is poured onto the base, leveled with a spatula and processed with a needle roller. This is necessary in order to remove air from the substance. Now you should let the floor dry, after which you can start finishing it. In this case, protect the flooded base from drafts and direct sun rays. In principle, it will not have a special effect on the mixture, but it's better to be safe.

It is necessary to remember that it is necessary to use the prepared solution within 40 minutes, so it is not necessary to mix a large amount.

The leveling of the wooden floor with a self-leveling mixture is carried out in exactly the same way. However, if the base is wooden, then all the elements must be firmly nailed. In addition, the surface should be recycled and cleaned from dust. After preparation, you can begin to fill.

Leveling the floor with a self-leveling mixture (the price depends on the consumption of the material) is the best option for preparing the base for finishing. The cost of the solution ranges from 10 dollars per bag weighing 25 kg. The consumption of the solution depends on how uneven the base base is.

In principle, these are all features of the floor leveling represented by the mixture. It is not difficult to do this yourself, so you can save money at work. In order to use the minimum amount of mortar, make a cement screed on the floor . Thus, you can make the procedure as cheap as possible.