Lampshades for the floor lamp with their own hands. How to make a lamp shade for a floor lamp

Of all the variety of lighting fixtures, the most cozy and "domestic" ones can be called floor lamps. They play a significant role in creating an atmosphere in the room and organizing the interior space. And what interesting it is possible to make lampshades for a floor lamp by own hands!

Variety of shades

Their assortment is very wide and different in purpose, size, shape. According to the type of material used for the manufacture, the following lampshades are distinguished:

1. Knits. Such lampshades add to the interior a certain rustic charm. Knitting patterns can be taken in a magazine or invented yourself, if you are a professional in this matter. Choose a loose mating because the patterns are best taken with holes through which light will pass.
2. Wooden. This kind is suitable for decorating a sauna. To make such lampshades for a floor lamp by one's own hands can be made of wooden slats, racks.
3. Tissue. Quite interesting products are obtained. To make such a lamp shade, you need a frame that can be wrapped around a cloth or wrapped in tight strips.

How to Sew a Lampshade for a Floor Lamp

All that is needed to create a shade is an idea, material and patience. First, we'll look at how to make a fabric shade. First of all, choose what kind of matter you want to sew. Suitable silk, linen, taffeta, cotton. Do not forget about the color of matter. It should be combined with the situation of the room (furniture upholstery, curtains, carpets). Although this does not matter.

So, you chose the fabric and decided on the color scheme. Get a new lampshade and prepare for work an adhesive gun, clothespins, a centimeter, chalk, pattern paper, a simple pencil, scissors. Now remove the measurements for the pattern. Measure the upper and lower circles of the lampshade and the side pieces. Add a few centimeters to the seams and folds. Connect the lines. Cut out.

On the fabric, lay out the pattern and circle it. Cut it neatly. Apply glue gun in a small amount on the fabric, and then on the lampshade. Now wrap the frame around the body and spread it with your fingers. All is ready!

Today lampshades for the floor lamp, made with their own hands, are valued at least as much as factory ones. Guests of your house will note and appreciate such an object of your decor. But it is not necessary to buy a new lampshade. If you have an old one, you can just restore it. To learn how to update a lampshade lampshade, read the next master class. You will understand how you can transform a lighting device with ordinary materials and accessories.

How to update an old lighting device

You will need:

- a pencil;

- fabric (at your choice);

- scissors;

- floor lamp with shade;

- satin tape;

- a large sheet (newspaper);

- several pieces of pins;

- glue spray (or regular adhesive for fabric).

First disconnect the wire. Remove the old lampshade from the floor lamp. Leave only the base. Lay the frame to one side on a large sheet. Draw a simple pencil upper and lower edges, rolling on paper. Connect both lines. Cut out a pattern, do not forget to add one centimeter on each side.

Then pin the paper pattern to the fabric, gently, slowly, cut into the office. Spray the inside of the fabric with adhesive spray (you can use a water-diluted adhesive for the fabric, apply it with a brush). Then place the base on the fabric and slowly roll, pressing and smoothing towards the edges. Remove excess fabrics.

Now process the top and bottom edges. Cover them with ribbon, fringe or braid. When the glue dries, place the lampshade in the floor lamp and turn on the light. You can decorate the product with buttons, appliqués and everything that your imagination wishes.

If you have an unwanted woolen sweater at home , use it to update the shade. Cut out a rectangle from it (depending on the size of the frame). Tighten the frame to them, fastened with pins. Edges bend under the rim of the lampshade. Secure with a thermo gun.

Next, your attention will be offered several options for lampshades, which you can link yourself.

How to crochet

Such a luminaire will update your interior and become a wonderful night lamp in your bedroom. You will need:

- frame for the shade;

- two coils of wool (can be of different colors);

- hook number 3;

- scissors.

The diameter of the lampshade is 26 centimeters. Type a chain of 52 loops. Then join the ring. Continue to knit according to the scheme for the rows:

First: type columns with a crochet (CH).

Second: CH, five air loops (VP).

The third: four CH, one VP.

Fourth: two bars without a crochet (SB), six EPs.

Fifth: three CH, eight EPs.

From the sixth to the eleventh: three SB, ten EP.

In the twelfth to the thirteenth: four CH, five EPs.

Fourteenth: five CH, VP and CH.

The last row all tie the SB. Close all the hinges. Knitted lampshade for the floor lamp is ready. It can be improved, transformed and supplemented with various accessories. Show your creative imagination.

How to make a lampshade for a floor lamp from napkins

To make it, you need to stock up with openwork napkins, glue and base. If you do not have a skeleton, you can make it yourself. Inflate the balloon of the correct size. If everything is prepared, then proceed. Wipe the napkins well with PVA glue and immediately glue the ball. In the place where the bulb will be inserted, leave a small space. When the workpiece dries, pierce the ball with a needle and remove the remnants. It was such an original element of decor. This floor lamp will perfectly fit into the vintage style of the room.

If you do not have extra napkin napkins, then just below read the master class on how to tie them together.

How to tie a napkin

You will need hook # 1 and acrylic yarn. The napkin should look round. So, dial twelve EPs. Join the ring. Tie it in columns without a crochet. In the second row, type three hinges for lifting and until the end, hang the air loops. Next, make three VIs, four CHs above the columns of the previous row. Repeat until the end of the chain.

The next row for beginners will be complicated, be careful (these loops alternate in all rows). We knit five EPs and eight CH. In the next row, dial 9 VP and 10 CH. Next, tie a string of eleven EPs and four SNs. Proceed to complete the mating swipe. Convert five VIs, fifteen SNs into the VI of the previous row. As you finish knitting, wet the napkin and stretch it. In this form, leave it to dry. You can starch napkins to better keep the form.

Lampshades for the floor lamp with their own hands can be tied with knitting needles, crocheted, sewed from the fabric or weave in the technique of macrame. Creating a new accessory is a great way to refresh the interior of a house.

Good luck in job!