Hobby, Needlework
How to make a ball of threads and glue with your own hands
There is nothing more magical and fascinating than making a small miracle, even if once invented and embodied by someone else. After all, you can always add anything to your craft: interesting additions or a part of the soul.
We start with the selection of consumables
The variety of modern crafts designed to decorate our lives is enormous. Balls - simple, but very impressive crafts.
A set of materials needed to create a souvenir:
• Inflatable (air) balls of small diameter;
• Any fat cream or petroleum jelly;
• a hank of a thread you like, which we will decorate the ball;
• long (collar) needle. It is required depending on the choice of the adhesive and the way it is wetted by the thread;
• glue - clerical, PVA or specially made.
Before you learn how to make a ball of threads and glue, and before you start selecting materials for the job, you need to determine the size of the future craft, the quality of the thread, which will be the main decorating element, and the method of pasting.
Balloon: basic requirements
We'll figure out how to make a ball of threads and glue with your own hands. The basis for making this souvenir is air balloons.
• balls should be round, since ovals require more accuracy, they can not always hold the given shape and are not as effective and versatile as regular spheres;
• It is better to take balls not very large, a diameter of 8-12 cm is the best option, especially if this is the first artisan.
And more importantly, that the ball was stronger, that is, the cheapest option can lead at a decisive moment, not in time blown away and spoiled the future product. It is worth buying inflatable balls with a margin and carefully check them before starting work.
Choose glue
Successful execution of the crafts depends largely on the composition of the glue. You can use clerical silicate glue in a plastic bottle. Here in this case we will need a thick needle. It is pierced by the walls of the bubble and stretches the thread through the glue, thereby wetting it, avoiding excessive wetting (the second wall of the bottle serves as a barrier). This is a good and economical way, but the use of PVA glue is often welcomed by our craftsmen. This universal glue is more plastic, softer, and it seems that the craftwork processed by it is nicer to the touch and even warmer. Although each method has its followers. The PVA glue is heavy, so it is diluted 1: 1 with water, mixed well and poured into a flat dish. Then the thread is passed through the glue solution. There is also a special recipe for glue, the most suitable for performing similar work: sugar is added to the aqueous solution of PVA. Such a mixture gives the manufactured articles the necessary rigidity and strength. The proportions of the glue are as follows: 30 g of water, 15 g of glue, 4-5 teaspoons of sugar.
How to make a ball of thread and glue-pencil? This is also possible, but the baby's help will be needed here, since it is necessary to stretch the thread along the glue pencil protruding from the case, pressing it well so that it can soak up, and this requires another pair of hands.
The main element of decoration is the thread
The thread is selected depending on what you want to see at the output. You can use thick woolen or acrylic threads.
Preparation of the workplace
The surface on which the process of the appearance of handicraft balls will occur should be protected from the aggressive influence of the raw materials. It is especially difficult to remove the countertop from silicate glue. Will get a piece of oilcloth or garden film. They cover the working surface. Before you make a ball of thread and glue, you need to protect your own clothes and hands. Here an apron and gloves made of silicone or fine rubber are very useful.
How to make a ball of threads with your own hands
So, we begin work. In a narrow container we pour a part of the prepared glue (we are talking about how to make a ball of threads and PVA glue). We put the selected thread close by. We inflate the round ball to the desired size and fasten it tightly, leaving the long enough end of the thread as a fastener, which is useful when drying the finished souvenir. Inflated air ball lubricate the prepared cream, petroleum jelly or any oil. This is done so that the ball does not stick to the threads. If this happens, tear off and pull out the remains of the ball from the resulting sphere will be impossible without deformation of the craft. Lowering the thread in the container with the glue and wetting it, we begin to wind the balloon. To impose turns, pulling a thread a little, it is possible in any order or arbitrarily depending on the conceived variant.
We have already said above how to make a ball of thread and office glue. You will need a thick needle, with which you can stretch the thread through a bottle of glue and reel in the same way as when working with PVA glue.
Drying Features
After the ball is wrapped, it must dry completely. Here you will need a long thread end. When drying the ball should not touch any surfaces, so the best option would be to tie it to a horizontal stick fixed in the place where the artifacts will dry without disturbing anyone. For complete drying, it takes a long time - 1-2 days. But there is no need to accelerate this process. Heating appliances located near to the hangings are capable of deforming them. If you overdo it with heating, then the source ball can burst and negate all efforts. Therefore, do not make unnecessary efforts. Allow the balls to dry out in vivo.
Final stage
After a good drying, the strings wrapping the ball are excellent solidified and will keep the shape. Now you need to carefully remove the original rubber ball, which serves as a kind of skeleton. It can simply be pierced with a needle and, when it is blown off, pull it out of the formed sphere with a hook.
Similar articles
Trending Now