Lamp E14 LED: main characteristics

The E14 LED lamp is one of the most popular models among all products developed on the basis of LED lighting technology. It is an excellent alternative to conventional incandescent lamps and makes a good competition with LED lamps. Due to the economical consumption of electricity, long life and bright lighting, these lamps can increasingly be seen as the main source of light in the premises of a very different purpose.

Applications

The human eye responds best to sunlight. Therefore, the more light emitted by an electric lamp is closer to the natural one, the more comfortable our sensations are over a long working day. It is the LED E14 LED lamp , due to its soft light, allows to significantly reduce the load on the eyes and thereby protect the person from rapid fatigue.

Creation of general lighting in living quarters, organization of complex industrial, emergency, street lighting, use as obstruction lights, creation of various types of lighting - in all these areas, efficient use of energy-saving LED lamps E14 is possible.

Today, LED lamps E14, whose price ranges from 100 to 150 rubles, are available to the bulk of consumers. Almost all large retail networks, public and entertainment establishments are installed. Entrepreneurs understand that it is more profitable to install LED lighting at an acceptable cost, than to once again burden ourselves with constant maintenance and replacement of standard incandescent lamps.

Lamp E14 LED: parameters

LED energy-saving lamps E14 differ in the following characteristics:

• Type of socle: E14;
• Working voltage: 220 V;
• Glow: warm 3200 K;
• Body temperature in working condition: not more than 40 ^о С;
• Service life: about 50 000 hours;
• Availability of the ability to adjust the brightness.

Advantages of LED lamps E14

The LED light emitting diode lamp E14 7W is designed as an innovative analogue of standard incandescent lamps with E14 socket type, and is also able to compete with previously widely used fluorescent light sources.

The main advantages of LED lamps, in comparison with the above lighting technologies, are:

1. Consumption of less electricity.
2. The presence of a more developed angle of glow, no shadow effect in the lighting zone.
3. The product of maximum bright light with the possibility of its regulation.
4. A truly impressive service life without the need for replacement.
5. Ability to maintain a stable operating temperature.
6. Absence of substances harmful to health and potentially dangerous components.

Disadvantages of LED lamps E14

Despite the innovative status and the presence of a wide range of obvious advantages, like any other technology created by human hands, the LED lamp has its drawbacks. First of all, it is worth highlighting a decrease in efficiency and service life when used in luminaires manufactured with non-fulfillment of requirements relating to heat removal.

Moreover, a sharp decrease in the service life of the LED light source can be observed with prolonged use in an environment with a temperature of about 60 ° C or higher.

In the end, the user may be disadvantaged by the presence of too bright, blinding lighting in the absence of special means for scattering, regulation of the level of light and protection of vision.

Chuck selection

Despite the fact that the E14 LED lamp has the ability to maintain a stable operating temperature, and also has a protection against overheating, to give preference to the choice of such an option for lighting better ceramic, porcelain cartridges.

Porcelain chucks have a longer service life than plastic counterparts. The most common ceramic cartridges for E14 lamps consist of a ceramic body attached to the screw contacts of copper or brass petals, springs and skirts, where the base is twisted.

Often the most problematic element of the cartridge is just the skirt. The choice of a cartridge with a skirt made of soft aluminum can bring a lot of trouble. The compliance of such metal leads to the appearance of small burrs when the lamp is twisted and screwed. Often, this element of the cartridge simply remains on the base when twisting.

That the E14 LED lamp served for the longest possible period, it is better to choose a ceramic cartridge with a skirt made of steel or stainless steel. At the same time, you should avoid buying cartridges with metallic elements of yellow color, which is typical for parts of the least durable and short-lived anodized aluminum.

Additional qualities of LED lamps E14

Lamp LED E14 (candle) is characterized by a whole set of additional custom characteristics. Among them is worth noting:

• The most efficient consumption of electrical energy along with its low consumption;
• Almost complete independence of serviceable work from fluctuations and voltage surges;
• The highest resistance to switching on and off;
• Protection against mechanical damage and vibration;
• No flicker effect.