HobbyNeedlework

Knitting Fit with Needles: Schematic and Description

Fichu came to us from France XVII century. At that time, this term meant a light lace or cambric handkerchief. They were used to cover the deep neckline.

Description

Today, fichu is once again gaining popularity. Now they are knit by hand from very thin threads. Most often, these shawls are performed in two versions:

  • In the form of a right triangle with one longer end;
  • In the form of a semicircle: wide in the center and narrowed along the edges.

In needlewomen, the question arises: how to knit a needle with knitting needles. The scheme and description can be easily found on the Internet. However, to remain satisfied with the result, the knitter must take into account a number of nuances.

Materials

The most important element for any knitting is, of course, yarn. Regardless of what is used when knitting the needle with a knitting pattern and description, it is better to give preference to thin strings (100 grams should contain at least 400 meters). Shawls, bound from thicker threads, look rude. Knitting needles must be of high quality. So it is more likely that thin threads will not break. It is most convenient to knit shawls with circular knitting needles. If to speak about the thickness, for openwork fichu variants, the spokes are not better than the number 3 and not thicker than 4. For a set of loops it is advised to use knitting needles for 2 units thicker than the workers.

Naturally, knitting is impossible without a scheme. Many use electronic options. But when knitting the needle with the needles, a diagram and a description for beginners, as well as those who do handicrafts away from the computer, should be printed. Those who plan to knit the fish regularly, you can advise to purchase special labels. If desired, they can be replaced with pins. Most often, these tools are used when typing the working edge and marking the rapports. Needles are also needed: thick with a blunt end for closing loops and tailors with lock rings.

Set of loops

For a set of loops, you need to take the knitting needles to 2 numbers thicker than those on which knitting will be performed. Thanks to this, the maximum elasticity of the edge is achieved. Putting together the two spokes, dial the loops in the amount indicated by the knitting patterns explained by the needle and the description.

It is important to consider that it is usually necessary to type a huge number of loops: at least three hundred. It is very easy to get confused in the calculations. That's why experienced masters advise to use labels. After typing a small block of loops (for example, 50), put a mark on the spoke. When the desired amount is reached, the set of loops ends.

Beginning of knitting

After the required number of loops is typed simultaneously on 2 spokes, one of them is carefully removed. Regardless of how they propose to knit the first row in the shawls of the fichu with the spokes of the scheme and the description, it should be performed by some facial or purl. At the same knitting is carried out with a spoke of working size. Subsequently, a series tied in this way will be considered set.

The huge number of loops in the work on fichu leads to the fact that there will be a lot of rapport in the canvas (often more than 50). Avoid mistakes and miscalculations can be, marking them immediately in knitting. This can be done directly on the knitted fabric with a contrasting thread. However, it is more convenient to use labels that are hung on the spoke in the right place between the loops. In the process of work they simply throw from one spoke to the other.

Knitting of shortened rows

Curious is the fact that fichu, in contrast to other shawls, most often matches from the openwork fringe. After the work on it is over, you must give your product a form. Most often the fichu looks like a semicircle with rather narrow ends.

Usually on the Internet it is not difficult to find pictures of fichu with spokes with diagrams and description. They always tell how to give a certain shape to the chosen product. However, beginner needlewomen can not easily figure out how the shortened rows fit together. That is why we should dwell on this issue in more detail.

When the openwork is finished, it is necessary to count half of the loops available on the spokes and put a mark here. The next row is knit up to the middle - plus 5. Then knitting unfolds, the loops are looped again to the middle (plus 5). Again a turn is made, 9 loops are knit, and the last tenth is tied together with the next. This avoids the appearance of holes in partial knitting. After that, a few more loops are added (usually from three to five). Each time knitting is unfolded, several loops are gradually added to it. The procedure is repeated until all the loops are inserted into the knitting. The shape of the future shawl depends on the number of knits added to each row of loops. The fewer, the wider and rounded will be the fichu.

Closing loops

Most often, when knitting a needle with a knitting needle, the pattern and description offer a way to close the loops. At the same time, the resulting edge must be sufficiently elastic. Most ways to achieve this do not allow. One of the most suitable methods for closing loops in the case of knitting fishes is the method proposed by Elizabeth Zimmermann. It provides for the use of a needle.

For its implementation after the end of knitting from the coil unwind the thread, which is about 4 times longer than the width of the blade. Its end is inserted into a thick needle. Then it is inserted into the first two loops on the spoke from right to left, the thread extends, but the loops are not removed. After this, from left to right, the needle extends through the first loop, which is dropped from the knitting needle. Such actions are repeated to the very end of the series.

Locking

An important stage in the manufacture of shawls is its washing and blocking. They are performed after the fichu knitting is over. First, the product should be washed in warm water using a liquid for knitted things. If it is not available, you can replace it with a regular shampoo.

Do not rub the shawl too much. Simply enough to soak in water with the addition of funds for about 10 minutes. After this, the fish should be thoroughly rinsed and slightly wrung out.

Now, with the help of needles with ears, the shawl should be split on a flat surface or, as the needlewomen say, to make a lock. Most often use a sheet, laid out on a carpet or blanket. First of all, you need to pin the middle, then gradually block the edges in turn. After the fichu is completely dry, it must keep its shape. If this does not happen, you will have to split the Schalke anew and gently steam it off with an iron through a damp cloth.

Description of the item "Tenderness"

If you want on the Internet, you can find a huge number of options for fichu spokes, the scheme and description of which will not give big problems to experienced knitters. Those who knit such shawl for the first time, you can advise to begin to try to execute a beautiful version called "Tenderness". It is distinguished by a fairly simple scheme, consisting of 48 rows of azhura. The rapport usually includes 18 loops.

To begin with, you need to dial 309 loops. The set should be as free as possible. It is because of this that later the shawl rim will be sufficiently patterned. The first row in this product is tied with one of the wrong loops. The proposed scheme has colored squares. Yellow marked edge, green - an additional loop of the last rapport, blue - empty cells (those that when knitting should not be taken into account). Even ranks are knitted according to the drawing.

After the work on the 48 rows of the scheme is completed, knitting of the shortened rows begins. For this is the middle, it is celebrated. Then the hinges are knit to the mark plus fifteen. After the turn, loops are again looped to the middle with an additional fifteen. After the technique of the truncated series is executed with addition in each of them on 3 loops. Finish the knitting of the fichu with the spokes of the scheme and the description offer 43 and 45 rows of openwork pattern. After this, the loops need to be closed with a needle and lock the shawls. Even a novice needlewoman can cope with the knitting of the fichu. The main thing is to have a great desire, to follow the advice and to start choosing the model easier.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.unansea.com. Theme powered by WordPress.