Infrared heaters "Ballu" (Ballu): instruction, characteristics, reviews

Infrared heaters are so popular today that they have found their wide distribution in almost all areas of human life. Not so long ago they could only be bought by wealthy buyers, but already today different models of this type are available to almost everyone. They are made in many countries, but it is necessary to choose the manufacturer that has established itself in the market.

Infra-red heaters "Balu" are presented for sale in a wide range. They serve for many years, do not require repair and perform their tasks without complaints from the user. If you compare with traditional convectors, these devices differ radically: they do not heat the air, but the surfaces and objects in the room.

Today, infrared heaters "Balu" are very popular. Reviews, the heating area of these devices you should be aware of before purchasing. Such devices can be compared to the room Sun, because the radiation of the unit is similar to its rays. Infrared waves have a long length, so they are perceived by the skin as heat that comes from the sun. In order to decide which model to choose, and also to know how to extend the service life, it is necessary to familiarize not only with the characteristics and instruction, but also with the feedback of consumers.

Reviews about infrared heaters brand "Balu" series BIH-APL

Infrared heaters "Balu", reviews about which you can read in the article, are presented to the attention of consumers by models from the BIH-APL series. In this case we are talking about the most compact and economical devices for directional heating. According to buyers, such devices are simply irreplaceable for local heating of individual zones.

From customer feedback, you can understand that the infrared heaters "Balu" are suitable for rooms with poor thermal insulation and high ceilings, where the use of traditional heating is ineffective. As an example, we can consider the model BIH-APL-0.6, which is a new development and will cost the customer 2,200 rubles. The heating power is 0.6 kW and the supply voltage is 220 V. Consumers are advised to set these devices at a height of between 2.4 and 3.5 m. If space in the room is limited, it is necessary to pay attention to the dimensions of the device that are equal 885 x 40 x 130 mm. Consumers say that the installation of the unit will be quite simple, because its weight is only 2.2 kg.

Reviews about models of the series BIH-LW

Infrared heaters "Balu", the price of which is quite acceptable, are also offered for sale in the BIH-LW series. Consumers like these lamp devices, which are universal and are perfect for heating semi-open or closed rooms.

The heater can be installed on almost any wall surface. From the words of consumers, it's quite simple to do this with the bracket supplied by the manufacturer in the kit. One of the models of the series is BIH-LW-1.5, which will be discussed below.

Technical characteristics of model BIH-LW-1.5

This heater Ballu will cost the buyer 1,600 rubles. The power of its heating varies from 500 to 1500 watts. You can install the device in a room with an approximate area of 25 m ² . Connection to the network is carried out using a power cord with a plug. The dimensions of the device together with the bracket are 560 x 165 x 120 mm. The machine weighs only 1.7 kg, so there should not be any problems with the installation work.

The manufacturer gives a guarantee for the heater for one year, so you can be sure of the quality, because during this time you can check the operation of the device. As an additional functionality, you can highlight the possibility of switching on and switching between modes of operation, while remote control can be used. Consumers claim that the device provides directional powerful heating. Even in the wind and frost, you can hope for continued efficiency.

Reviews about the heater series Bali

Universal infrared heaters are equipment that is manufactured by the company under the Bali series. Users believe that these devices are excellent for heating semi-open and closed rooms.

The unit can be installed on almost any surface using brackets, as well as a steel telescopic tripod. Consumers emphasize that thanks to this device can maintain mobility. These units can be used for heating bars, country houses, summer cafes, apartments, garages.

Technical specifications of BIH-L-2.0 heater

This Ballu heater belongs to the series described above. It will cost the customer 3000 rubles, and the heating capacity is 2 kW. The maximum height of the installation can reach 3.5 m. The equipment is powered from the mains with a voltage ranging from 220 to 240 V. The dimensions of the device are 740 x 180 x 90 mm. The unit weighs 3.5 kg.

Reviews of the BIH-AP2 series heaters

Infra-red heaters "Balu" are presented for sale in a wide range. Sometimes consumers can not make a choice, because each model has its positive aspects. According to users, the BIH-AP2 series models are compact, economical and capable of directional heating. They can be used for local heating of a certain area, installing in a room with high ceilings and poor thermal insulation. In these cases, the use of traditional methods of heating is ineffective.

Consumers who have already evaluated the advantages of these models note that they are characterized by low power consumption. The kit includes brackets that provide quick and easy mounting to the ceiling and wall. Among other things, for installation you can use threaded spiers and even a cable.

Ballu BIH-AP2-0.6 specifications

This infrared heater ceiling "Baloo" costs 2400 rubles. Its power is 0.6 kW, while the maximum installation height is 2.2 m. In order to allocate free space, it is necessary to know what dimensions the equipment has. In this model, the dimensions are limited by the following parameters: 885 x 40 x 130 mm. The device weighs 2.3 kg.

Manual for the operation of infrared heaters from the manufacturer "Balu"

The infrared heaters "Balu", the operating instructions of which are supplied in the kit, must be used in accordance with the manufacturer's requirements. Thus, the devices should be protected from ingress of dust, moisture and avoid hitting the body. Particular care must be taken with the heat-insulating plate.

Before servicing or cleaning the appliance, it must be disconnected from the mains. If you plan to install the unit on the surface of the wall or ceiling, you need to take care of the heat resistance of the coating, which should be 80 ° C. The device must be connected to the mains by a power cord that has a plug. If you want to connect the unit to a fixed wiring, you must provide a disconnector that will ensure that the equipment is disconnected from the mains.

Infrared heaters "Balu" should be moved with extreme caution. In this case, it is necessary to exclude falling and blows. In order to avoid a person's electric shock, the self-renewing of the damaged power supply cable should be avoided. This should be done by specialists of the service center. The power cord must not touch hot surfaces during operation and storage of the appliance. The thermal insulation plate must not be cleaned with flammable liquids during operation. Install the heater in the immediate vicinity of the outlet is not permissible.