How to update Windows to 10: instructions, recommendations and feedback. Can I upgrade Windows 10?

Became available for download in late July, the new "OSes" Windows of the tenth modification has already made a lot of noise and get a lot of controversial feedback. Not only that it was provided for downloading from the official Microsoft site in a completely free mode, so it was still possible not only to install the system from scratch, but to update the existing Windows up to version 10. But this only concerned systems 7, 8 and 8.1. Unfortunately, XP and Vista are not upgradeable. Separately, we will consider how to update Windows Phone to 10.

What you need to know before installing Windows 10

First of all, we should pay attention to several important aspects. As you already know, you can update the system only in versions of Windows 7 and higher. But even here one should take into account that the bit depth of the installed "tens" should correspond to the old "operating system", that is, if the same existing "seven" has a 32-bit architecture, the update will be made up to 32-bit "tens". The same goes for 64-bit systems.

In addition, if the user decided to upgrade Windows to version 10, you should pay attention to system requirements. They, however, are not as high as one might suppose. According to official data of the corporation Microsoft, for the new system will suffice 2-nuclear processor and 2 GB of RAM. But with a hard disk, things are somewhat more complicated. The fact is that, according to the official release, for installation you need slightly more than 3.5 GB of free disk space. In fact, during the installation process, the installer can issue a message stating that at least 9 GB is required. This is due only to the download of the installation package. When the process is complete, the installer files, as well as the installation files of the previous version of Windows, can be deleted. But more about this later.

Is it worth to establish the "top ten"

Whether to update to Windows 10 an existing system, everyone decides. However, very many experts highlight quite interesting new possibilities of the "dozens". For example, enhanced Xbox support, advanced system management or computer system administration, the newly-installed Start button and the main menu in conjunction with the Metro interface elements, the ability to quickly switch between standard and tablet mode, the ability to roll back to a previous version of Windows that was updated To "ten", and so on.

Separately it is necessary to say that the system has a new Internet browser Edge, which replaced Internet Explorer. By the way, by all accounts, it bypasses the closest competitors, including even such well-known programs as Google Chrome, Opera and Mozilla.

How to upgrade Windows 7 to Windows 10?

But back to the installation. The first thing to do is go through the registration procedure on the Microsoft website and create an account (if it is not already available for some reason). After this, you can, so to speak, get in line. When the time comes, the flashing icon in System Tray will notify the user that the installation content is available for download.

However, for those who do not want to wait, the company has provided a more convenient option, of which not everyone knows. From the same official site, you can download a small utility called Media Creation Tool and run the installation immediately.

Immediately it is worth considering that you can upgrade Windows to version 10 only if all the latest updates were installed for the previous system. Otherwise, the installer after the launch will offer to perform such an update first, and only then proceed to install the new system.

The process of installing the "dozens" of special difficulties does not cause. The main time is spent only on downloading the installation distribution from the Microsoft website. It is clear that in this case everything depends on the speed of the Internet connection, and the process itself can take several hours.

Further all is simple. As usual, you first use the option to update this computer (rather than create bootable media), then select the language options, keyboard layout, currency display formats and dates, and then the start of the installation is activated.

When the installer comes up with the choice of the installation option, you should pay attention to the fact that there are two of them: update with saving programs, files and settings (Upgrade) and "clean" installation either in the new partition as the second "OSes" or on top The existing system with complete destruction of data. In this case, we are interested in the first method. It is good that, firstly, you do not have to bother with formatting partitions, and secondly, the necessary information will remain on your hard disk, and all previously installed programs will work without problems.

We look further, as there is an upgrade to Windows 10. How to update the system so that you do not dig in the settings? As easy as pie. At a certain stage, the installer will display a window with the basic settings. Most users can use the Express Settings, advanced users can play with them in the Advanced section (the settings window is not provided for all versions of Windows 10, for example, they do not exist in the original free version). In general, that's all. It remains to wait for the installation process to complete.

How to upgrade Windows 8.1 to Windows 10

In the G8 or its 8.1 modifications, the update process is practically the same as what was described in the case of Windows 7. Problems can appear at the stage of system setup, because for some devices (in most cases these are graphics adapters) the drivers are not always installed . You can solve the problem by installing the drivers under Windows 8 again.

Installing the system from a USB drive or optical disc

When using the Media Creation Tool at the beginning of the startup, you must select not to update the computer, but to create bootable media.

After the files are finally uploaded, you will need to create an image and burn it either to a disk or to a regular flash drive. After that, the desired device is installed in the BIOS as a priority for downloading, and the installation starts from the selected media. The process of updating is absolutely no different from the above. At the end of the installation (on reboot), of course, the BIOS settings need to be changed so that the system partition of the hard disk is set as a priority.

Presetting the system

At the first start, in principle, no special settings are required. Please note that the login will be made under the Microsoft account with the login and password. In the future, the request for a password and login at the usual input or when you exit the sleep mode can be disabled without any problems. But now it's not about that.

If you look carefully at the system, you can see that when you update the "ten", it saves all the settings, files and programs that were installed in the old system. But there's much less space on the hard drive.

If the hard drive needs to be cleaned, you need to use the standard disk cleaning tool, you can also remove the Windows 10 installation files and the old system fileset that is responsible for the rollback (if, of course, the user is not going to return to the previously installed "operating system"). According to the most conservative estimates, you can free up about 25-30 GB of disk space.

As already mentioned, it is possible that some devices will not work correctly. You can simply reinstall the drivers from a special disk or download their latest versions from the official Internet resource of the equipment manufacturer. By the way, than a good update: rebuild the connection to the Internet or to the local network will not have to.

As for the activation of the "tens", it will not be required when upgrading (in contrast to a clean installation). You can check the product key in the properties of the computer.

Installing updates for Windows 10

Now let's see if it's possible to update Windows 10. As previously reported, for the "dozens" the release of the service packs will not be provided. But, as practice shows, they come out with an enviable regularity. What is most interesting - even with automatic updating enabled, they are not always installed in this mode.

So, we have the established "ten". How to update? "Windows Update Center 10", located in the form of a menu in the "Control Panel", often does not open. Here you need to use, again, the properties of the computer, and on the left select this section.

By the way, this way you can install not only packages of important updates, but also upgrade the system to Windows 10 Pro, not to mention additional Microsoft products.

Upgrade to Windows 10 Pro

Upgrade to the professional version is made in the standard way from the "Update Center". First, the latest updates for the existing "dozens", say, the Technical Preview, are installed, and then the Windows 10 Pro installation package is downloaded.

It will take at least 10 GB of free space on the system drive. The update process may take several hours. Again, all settings and programs will not be affected, although some minor changes in the interface and the additional features and commands of the drop-down context menus will become noticeable.

Installing Windows Phone 10 on Mobile Devices

We will dwell on how to update Windows Phone to 10. Here, too, there are two ways. In the first case, in the smartphone settings, check the settings for the automatic download of the update in the smartphone update section and wait for the queue.

In the second case, if you do not want to wait, a more complicated variant is used. First, you must reset all settings on your smartphone, after which you need to download the Windows Insider application to your smartphone, and install WPInsiderHacks on your computer, and install it.

In the network settings, we activate the proxy server, register the IP address of the computer and specify port 8877. Now in the browser we assign the IP address of the computer and agree with all the certificates. Then we use Windows Insider and activate the button "Get preview builds", then use the Set to RM-976_1161 item and click the "Accept" button. We agree with the license (the application will automatically close).

Now go back to the Wi-Fi settings, turn off the proxy and delete the IP data. Again open the application on the smartphone, enter your account and use the button "Fast Branch", and then in the settings of updates check their availability and "tapaem" on the "Refresh". All. "Ten" will be installed automatically.

Conclusion

Here is a brief and all about the question, how to update Windows to 10 versions on different devices. As you can see, some difficulties can arise with mobile gadgets. With computer systems, there is no problem, except that the reinstallation of drivers of some non-standard devices. Otherwise, the installation process is much simpler than the same installation of the "seven", not to mention Windows 8 or 8.1. But whether it is worth doing an update, decide for yourself. Feedback from users about the new system is very controversial, so you can not give an unambiguous answer to the question. Here, perhaps, and all about how to update Windows to 10 version.